Professional Documents
Culture Documents
Cqi 2 Steel
Cqi 2 Steel
Cqi 2 Steel
CQI 2 : Introduction
2. Using tensile stress-strain diagram, explain all the parameter in the diagram.
2. Design a simply supported beam of 10m effective span carrying a total load of 60
kN/m. The depth of beam should not exceed 500mm. The compression flange of the
beam is laterally supported by floor construction. Assume stiff end bearing is 75mm.
2. What are the different effective lengths for different boundary condition?
6. What are Steps in the design of member in bending and axial compression
7. Design a column with UC section of length 10m to carry an axial factored load of
1400kN. The column may be assumed to have restrained in position but not in
direction at both ends.