Professional Documents
Culture Documents
IEC Envolventes ABB
IEC Envolventes ABB
Enclosed Starters
System proS
Enclosed Products
Content
1
System proS
Easy as ABB
1 2
3 4
2
System proS Transformer Kits O/L Relay
Pilot Device Kits • Fused on primary and secondary
• Pre-wired, ready-to-operate • Primary voltage 120-208-240-347-416-480-600
• One, two or three modules • Secondary voltage 24-120
• Pushbuttons, pilot lights and selector switches • Pre-wired and ready to install
3
System proS
Enclosed Starters
Description
• Across the line (D.O.L.) and 2 speeds starters
• Maximum CSA/UL horsepower ratings 7,5 to 125 HP at 600 VAC
• Non-combination and combination types available
• Compact space saving design
• Pre-wired pilot device and control transformer kits allow for quick and easy field modification and installation
• Captive terminal screws
• Touch safe design: All connection terminals are protected against accidental touch
• External connections: all starters inlcude necessary terminal blocks and wiring to control the starter by an external
maintained contact when used with the appropriate pilot device kit
Enclosure Types
• Metal: Type 1, 4/12, 4X stainless steel type 304 # 4
General Information
The extensive requirements for group motor circuits are:
- isolation and short circuit protection
- motor control : Starting and Stopping
- motor protection against overloads
Those functions are presented in this catalogue; the motor control and motor protection against overloads (See drawing below).
The isolation and short-circuit protection can be provided by disconnect switches : OS/OT range or by Tmax circuit breakers.
Use the recommended fuses as shown in the table on page 45.
For detailed information please refer to coordination tables available on request.
The control is provided by the contactor of the starter and the protection against overloads by the associated overload relay.
As the supply circuit is normally rated for the motor full load current (FLC), the O/L relay protects both motor and supply circuit against overloads.
High starting torque, simple and low-price direct motor starting with full voltage (so called “direct-on-line” or d.o.l.) is the most common way of start-
ing a motor.
Starting torque and current depend on the motor type. Starting torque is roughly equal to 1.9 to 2.1 times the motor’s full speed value and starting
current 5.5 to 7 times the motor FLC value. Quick to reach the full speed due to its high starting torque, the d.o.l. starter requires a strong power sup-
ply to handle this high inrush current.
4
System proS
Technical Specifications
5
System proS
Starter Catalog Number Explanation
PS - AF S X 1 1 - L 04 A 22
Auxiliary contacts:
22 = 2 N.O. + 2 N.C.
Contactor size:
AF = AF09 2F = AF52 Pilot device:
(Starter type “S” - “A” - “B”)
0F = AF16 3F = AF80 A = PS-SS (P.B. “Start” + “Stop”)
1F = AF30 4F = AF140 B = PS-SSI (P.B. “Start” + “Stop” + P.L. “On”)
C = PS-SL2 (2 Positions “Off/On”)
Starter type: D = PS-SL2I (2 Positions “Off/On” + P.L. “On”)
S = Across the Line D.O.L. A = Single phase (120 Volts / 1 Pole) E = PS-SL3 (3 Positions “Hand/Off/Auto”)
R = Reversing B = Single phase (208-240 Volts / 2 Poles) F = PS-SL3I (3 Positions “Hand/Off/Auto” + P.L. “On”)
T = 2 Speeds - 2 Windings G = PS-PL (P.L. “On”)
V = 2 Speeds - 1 Winding Q = PS-SE (P.B. “Start” - “Emergency Stop”)
S = PS-SL2IO (2 Positions “Off/On” + P.L. “On” + “Fault”)
T = PS-SL2IO-F (2 Positions “Hors/En” + P.L. “En Service” + “Faute”)
U = PS-SL3IO (3 Positions “Hand/Off/Auto” + P.L.”On” + “Fault”)
Combination: W = PS-SL2IH** (2 Positions “Off/On” + P.L. “On” + “Off”)
X = Not Y = PS-SL3IH** (3 Positions “Hand/Off/Auto” + P.L.”On” + “Off”)
N = Non-Fusible disc. SW XA = PS-SL2K (2 Positions Key operated “Off/On”)
F = Fusible disc. SW XB = PS-SL2KI (2 Positions Key operated “Off/On” + P.L. “On”)
B = Breaker MCP XC = PS-SL3K (3 Positions Key operated “Hand/Off/Auto”)
XD = PS-SL3KI (3 Positions Key operated “Hand/Off/Auto” + P.L. “On”)
XE = PS-SL2KIO (2 Positions Key operated “Off/On” + P.L. “On” + “Fault”)
Enclosure type:
XF = PS-SL3KIO (3 Positions Key operated “Hand/Off/Auto” + P.L.”On” + “Fault”)
1 = Type 1 4 = Type 4/12 X = Type 4X (stainless steel type 304 # 4)
XG = PS-SL2KIH** (2 Positions Key operated “Off/On” + P.L. “On” + “Off”)
XH = PS-SL3KIH** (3 Positions Key operated “Hand/Off/Auto” + P.L.”On” + “Off”)
Coil voltage:
1 = 24-60 Volts 3 = 100-250 Volts
2 = 48-130 Volts 4 = 250-500 Volts ** = Factory installed pilot device kit ONLY
Overload selection:
(Starter type “R” )
HP Rated (thermal O/L)
A = PS-FRS (P.B. “Forward” + “Reverse” + “Stop”)
Class 10 (AF09 - AF16 - AF30)
B = PS-SL3R (3 Positions “Forward/Off/Reverse”)
A = TF42-0.13 (0.10 ... 0.13A)
C = PS-SL3RI (3 Positions “Forward/Off/Reverse” + P.L. “Forward” + “Reverse”)
B = TF42-0.17 (0.13 ... 0.17A)
C = TF42-0.23 (0.17 ... 0.23A)
(Starter type “T” - “V”)
D = TF42-0.31 (0.23 ... 0.31A)
A = PS-FSO (P.B. “Slow” + “Fast” + “Stop”)
E = TF42-0.41 (0.31 ... 0.41A)
B = PS-SL3F (3 Positions “Slow/Off/Fast”)
F = TF42-0.55 (0.41 ... 0.55A)
C = PS-SL3FI (3 Positions “Slow/Off/Fast” + P.L. “Slow” + “Fast”)
G = TF42-0.74 (0.55 ... 0.74A)
D = PS-FSO-F (P.B. “Lent” + “Rapide” + “Arrêt”)
H = TF42-1.0 (0.74 ... 1.0A)
G = PS-SL4F (4 Positions “Auto/Off/Slow/Fast”)
J = TF42-1.3 (1.0 ... 1.3A)
H = PS-SL4FI (4 Positions “Auto/Off/Slow/Fast” + P.L. “Slow” + “Fast”)
K = TF42-1.7 (1.3 ... 1.7A)
L = TF42-2.3 (1.7 ... 2.3A)
M = TF42-3.1 (2.3 ... 3.1A)
N = TF42-4.2 (3.1 ... 4.2A)
P = TF42-5.7 (4.2 ... 5.7A)
Q = TF42-7.6 (5.7 ... 7.6A)
R = TF42-10 (7.6 ... 10A)
S = TF42-13 (10 ... 13A)
T = TF42-16 (13 ... 16A)
U = TF42-20 (16 ... 20A)
V = TF42-24 (20 ... 24A)
W = TF42-29 (24 ... 29A)
X = TF42-35 (29 ... 35A)
Class 10 (AF52)
A = TF65-28 (22 … 28A)
B = TF65-33 (25 … 33A)
C = TF65-40 (30 … 40A)
D = TF65-47 (36 … 47A)
E = TF65-53 (44 … 53A)
F = TF65-60 (50 … 60A)
G = TF65-67 (57 … 67A)
Class 10 (AF80)
A = TF96-51 (40 … 51A)
B = TF96-60 (48 … 60A)
C = TF96-68 (57 … 68A)
D = TF96-78 (65 … 78A)
E = TF96-87 (75 … 87A)
F = TF96-96 (84 … 96A)
Control transformer:
Class 10 (AF140)
(AF09 - AF16 - AF30 - AF52 - AF80) (AF140)
A = TF140DU-90 (66 … 90A)
01 = PS-50-240/120 (240/120 Volts-50VA) 01 = PS-100-240/120 (240/120 Volts-100VA)
B = TF140DU-110 (80 … 110A)
02 = PS-50-347/120 (347/120 Volts-50VA) 02 = PS-100-347/120 (347/120 Volts-100VA)
C = TF140DU-135 (100 … 135A)
03 = PS-50-480/120 (480/120 Volts-50VA) 03 = PS-100-480/120 (480/120 Volts-100VA)
D = TF140DU-142 (110 … 142A)
(Overload must be selected when used with combination breakers”MCP”) 04 = PS-50-600/120 (600/120 Volts-50VA) 04 = PS-100-600/120 (600/120 Volts-100VA)
05 = PS-50-240/24 (240/24 Volts-50VA) 05 = PS-100-240/24 (240/24 Volts-100VA)
06 = PS-50-480/24 (480/24 Volts-50VA) 06 = PS-100-480/24 (480/24 Volts-100VA)
Overload selection for 2 Speeds - 1 Winding “V” & 2 Speeds - 2 Windings “T” 07 = PS-50-600/24 (600/24 Volts-50VA) 07 = PS-100-600/24 (600/24 Volts-100VA)
08 = PS-50-208/120 (208/120 Volts-50VA) 08 = PS-100-208/120 (208/120 Volts-100VA)
1 * = 2S1W 2 * = 2S2W
09 = PS-50-208/24 (208/24 Volts-50VA) 09 = PS-100-208/24 (208/24 Volts-100VA)
12 = PS-50-120/24 (120/24 Volts-50VA) 12 = PS-100-120/24 (120/24 Volts-100VA)
6
System proS
Single Phase Starters, Non-Combination1
HP Rated, Non-Reversing
Type 1 Type 4/12 Type 4X
CSA Motor Maximum
Contactor
Switching Motor HP Catalog Catalog Catalog
Size
Current ratings 120V Number Number Number
13.8 AF09 0.75 PS-AFAX13 PS-AFAX43 PS-AFAXX3
20 AF16 1.5 PS-0FAX13 PS-0FAX43 PS-0FAXX3
24 AF30 2 PS-1FAX13 PS-1FAX43 PS-1FAXX3
34 AF52 3 PS-2FAX13 PS-2FAX43 PS-2FAXX3
80 AF80 7.5 PS-3FAX13 PS-3FAX43 PS-3FAXX3
HP Rated, Non-Reversing
Type 1 Type 4/12 Type 4X
CSA Motor Maximum
Contactor
Switching Motor HP Catalog Catalog Catalog
Size
Current ratings 240V Number Number Number
Volts
Hz 24 - 60 48 - 130 100 - 250 250 - 500
50/60 1 2 3 4
1 Overload relays, pilot device kits and control transformers must be ordered separately (see pages 17 to 22)
7
System proS
Single Phase Combination Starters1
Volts
Hz 24 - 60 48 - 130 100 - 250 250 - 500
50/60 1 2 3 4
1 Overload relays, pilot device kits and control transformers must be ordered separately (see pages 17 to 22)
8
System proS
3 Phase Starters, Non-Combination1
Volts
Hz 24 - 60 48 - 130 100 - 250 250 - 500
50/60 1 2 3 4
1 Overload relays, pilot device kits and control transformers must be ordered separately (see pages 17 to 22)
2 Ratings listed are at 600V AC
9
System proS
3 Phase Starters, Combination Fusible Disconnect Switch1
Volts
Hz 24 - 60 48 - 130 100 - 250 250 - 500
50/60 1 2 3 4
1 Overload relays, pilot device kits and control transformers must be ordered separately (see pages 17 to 22)
2 Ratings listed are at 600V AC
10
System proS
3 Phase Starters, Combination Non-Fusible Disconnect Switch1
Volts
Hz 24 - 60 48 - 130 100 - 250 250 - 500
50/60 1 2 3 4
1 Overload relays, pilot device kits and control transformers must be ordered separately (see pages 17 to 22)
2 Ratings listed are at 600V AC
11
System proS
3 Phase Starters, Combination MCP1,3
Volts
Hz 24 - 60 48 - 130 100 - 250 250 - 500
50/60 1 2 3 4
1 Overload relays, pilot device kits and control transformers must be ordered separately (see pages 17 to 22)
2 Ratings listed are at 600V AC
3 MCP combination starters MUST have the overload relay installed by ABB.
12
System proS
3 Phase Starters, 2S-2W, Non-Combination1
1 Overload relays, pilot device kits and control transformers must be ordered separately (see pages 17 to 22)
2 Ratings listed are at 600V AC
13
System proS
3 Phase Starters, 2S-2W, Combination1
Volts
Hz 24 - 60 48 - 130 100 - 250 250 - 500
50/60 1 2 3 4
1 Overload relays, pilot device kits and control transformers must be ordered separately (see pages 17 to 22)
2 Ratings listed are at 600V AC
14
System proS
3 Phase 2S-1W Starters, Non-Combination1
Volts
Hz 24 - 60 48 - 130 100 - 250 250 - 500
50/60 1 2 3 4
1 Overload relays, pilot device kits and control transformers must be ordered separately (see pages 17 to 22)
2 Ratings listed are at 600V AC
15
System proS
3 Phase 2S-1W Starters, Combination1
Volts
Hz 24 - 60 48 - 130 100 - 250 250 - 500
50/60 1 2 3 4
1 Overload relays, pilot device kits and control transformers must be ordered separately (see pages 17 to 22)
2 Ratings listed are at 600V AC
16
System proS
Thermal Overload Relay Sizing Chart
Suffix for
1-phase 3-phase Thermal Overload
factory
Relay Class 10
120V 240V 208V 240V 480V 600V installation
- - - - - - TF42-0.13 (0.10 ... 0.13) A
* It is the client’s responsibility to confirm whether the overload relay suggested is appropriate for their application.
Please verify correct overload required for each specific application with the motor’s name plate.
17
System proS
Overload Relay Sizing
* It is the client’s responsibility to confirm whether teh overload relay suggested is appropriate for their application.
Please verify correct overload required for each specific application with the motor’s name plate.
18
System proS
Pilot Device Kits for D.O.L. Starters
System proS, Pilot Device kits
130V 2 2S 3 Position
3 Position Switch + Switch
Pilot Light English SLOW-OFF-FAST
HAND-OFF-AUTO / ONB PS-SL3F
F PS-SL3I
2S 3 Position Switch LENT-HORS-RAPIDE E PS-SL3F-F
130V 2 3 Position Keyed Switch + Pilot light English HAND-OFF-AUTO / ON XD PS-SL3KI
DOL Push buttons START / STOP A PS-SS
24V 1 DOL Pilot
2 Position Light+ Pilot Light
Switch English OFF-ON / ON ON D G
PS-SL2I PS-PLF
Two
24V 3 DOL 3 Position
Push Switch
buttons + Pilot
+ Pilot Light
light EnglishHAND-OFF-AUTO / ON / STOP / ON
START F PS-SL3I
B PS-SSIF
Operators DOL Push buttons MARCHE / ARRET H PS-SS-F
24V 2 2 Position Switch + Pilot Light English OFF-ON / ON D PS-SL2IF
DOL 2 Position Switch + Pilot Light HORS-EN / EN SERVICE L PS-SL2I-F
24V 2 DOL 2 Position Keyed
3 Position Switch
Switch + Pilot
+ Pilot light
Light EnglishMAN-HORS-AUTO /OFF-ON
ON / ON N XB
PS-SL3I-F PS-SL2KIF
19
System proS
Pilot Device Kits for D.O.L. Starters
Suffix for
Pilot # of Nameplate Catalog
Description Nameplate Text factory
Light Devices Language Number
installation
130V 3 2 Position Keyed Switch + Pilot lights English OFF-ON / ON / FAULT XE PS-SL2KIO
130V 3 2 Position Keyed Switch + Pilot lights English OFF-ON / ON / OFF XG PS-SL2KIH**
130V 3 3 Position Keyed Switch + Pilot lights English HAND-OFF-AUTO / ON / FAULT XF PS-SL3KIO
130V 3 3 Position Keyed Switch + Pilot lights English HAND-OFF-AUTO / ON / OFF XH PS-SL3KIH**
24V 3 2 Position Keyed Switch + Pilot lights English OFF-ON / ON / FAULT XE PS-SL2KIOF
24V 3 2 Position Keyed Switch + Pilot lights English OFF-ON / ON / OFF XG PS-SL2KIHF**
24V 3 3 Position Keyed Switch + Pilot lights English HAND-OFF-AUTO / ON / FAULT XF PS-SL3KIOF
24V 3 3 Position Keyed Switch + Pilot lights English HAND-OFF-AUTO / ON / OFF XH PS-SL3KIHF**
20
System proS
Pilot Device Kits for 2-Speed and Reversing Starters
Customer or factory installed pilot device kits for 2-speed and reversing starters
Suffix for
Starter Pilot # of Nameplate Catalog
Description Nameplate Text factory
Type Light Devices Language Number
installation
130V 3 3 Position Switch + Pilot Lights English FWD-OFF-REV / FORWARD / REVERSE C PS-SL3RI
24V 3 3 Position Switch + Pilot Lights English FWD-OFF-REV / FORWARD / REVERSE C PS-SL3RIF
Rev.
-- 3 Push buttons English FORWARD-REVERSE-STOP A PS-FRS
130V 3 3 Position Switch + Pilot Lights English SLOW-OFF-FAST / SLOW / FAST C PS-SL3FI
130V 3 4 Position Switch + Pilot Lights English AUTO-OFF-SLOW-FAST / SLOW / FAST H PS-SL4FI
24V 3 3 Position Switch + Pilot Lights English SLOW-OFF-FAST / SLOW / FAST C PS-SL3FIF
2-Speed 24V 3 4 Position Switch + Pilot Lights English AUTO-OFF-SLOW-FAST / SLOW / FAST H PS-SL4FIF
21
System proS
Transformer Kits
Transformer kits
240 24 05 PS-50-240/24
480 24 06 PS-50-480/24
PS-AF, 0F, 1F, 2F, 3F 50
600 24 07 PS-50-600/24
208 24 09 PS-50-208/24
416 24 11 PS-50-416/24
120 24 12 PS-50-120/24
240 24 05 PS-100-240/24
480 24 06 PS-100-480/24
PS-4F 100
600 24 07 PS-100-600/24
208 24 09 PS-100-208/24
416 24 11 PS-100-416/24
120 24 12 PS-100-120/24
22
System proS
Technical Data
Standard selection for Non-combination Starters
Table #1
ProS Main Maximum Combination AC1 AC3 Single phase (HP) Three Phases (HP)
Contactor
Starters Protection overload kA 600V 600V 120V 208V 240V 208V 240V 480V 600V
PS-AF_X... N/A AF09 TF42-16 5 25 Amp 9 Amp 0.75 HP 1 HP 1.5 HP 2 HP 2 HP 5 HP 7.5 HP
PS-4F_X... N/A AF140 TF140DU-142 10 200 Amp 125 Amp - - - 40 HP 50 HP 100 HP 125 HP
PS-4F_N... OT200U12 AF140 TF140DU-142 10 200 Amp 125 Amp - - - 40 HP 50 HP 100 HP 125 HP
23
System proS
Technical Data
Standard selection for Combination Starters (Fuse Disconnect Switches)
Table #3
ProS Main Maximum Combination AC1 AC3 Single phase (HP) Three Phases (HP)
Contactor
Starters Protection overload kA 600V 600V 120V 208V 240V 208V 240V 480V 600V
PS-AF_F... OS30FAJ12 AF09 TF42-16 Contact ABB 25 Amp 9 Amp 0.75 HP 1 HP 1.5 HP 2 HP 2 HP 5 HP 7.5 HP
PS-3F_F... OS200J12 AF80 TF96-87 Contact ABB 105 Amp 77 Amp 7.5 HP 15 HP 15 HP 25 HP 30 HP 60 HP 75 HP
PS-4F_F... OS200J12 AF140 TF140DU-142 Contact ABB 200 Amp 125 Amp - - - 40 HP 50 HP 100 HP 125 HP
24
System proS
Technical Data
Standard selection for Combination Starters (MCP Breakers)
Table #4
ProS Main Maximum Combination AC1 AC3 Single phase (HP) Three Phases (HP)
Contactor
Starters Protection overload kA 600V 600V 120V 208V 240V 208V 240V 480V 600V
PS-AF_B... TS3L025MW AF09 TF42-16 Contact ABB 25 Amp 9 Amp 0.75 HP 1 HP 1.5 HP 2 HP 2 HP 5 HP 7.5 HP
PS-3F_B... TS3L150MW AF80 TF96-87 Contact ABB 105 Amp 77 Amp 7.5 HP 15 HP 15 HP 25 HP 30 HP 60 HP 75 HP
PS-4F_B... T4S250E5W AF140 TF140DU-142 Contact ABB 200 Amp 125 Amp - - - 40 HP 50 HP 100 HP 125 HP
25
System proS
Technical Data
Enclosures dimensions for IEC Non-combination Starters
Table #7
AC1 AC3 Single phase (HP) Three Phases (HP)
ProS Type 1 Type 12-4-4X
Starters (H x W x D) (H x W x D)
600V 600V 120V 208V 240V 208V 240V 480V 600V
PS-AFS...
PS-AFR...
PS-AFC... 10” x 6-3/4” x 6-1/2” 10” x 8-1/2” x 6-1/2”
PS-AFK... (254 x 172 x 165mm) (254 x 216 x 165mm)
PS-AFA... ...X... 25 Amp 9 amp 0.75HP 1HP 1.5HP 2HP 2HP 5HP 7.5HP
PS-AFB...
PS-0FS...
PS-0FR...
PS-0FC... 10” x 6-3/4” x 6-1/2” 10” x 8-1/2” x 6-1/2”
PS-0FK... (254 x 172 x 165mm) (254 x 216 x 165mm)
PS-0FA... ...X... 30 Amp 17 Amp 1.5 HP 2 HP 3 HP 5 HP 5 HP 10 HP 15 HP
PS-0FB...
PS-1FS...
PS-1FR...
PS-1FC... 10” x 6-3/4” x 6-1/2” 10” x 8-1/2” x 6-1/2”
PS-1FK... (254 x 172 x 165mm) (254 x 216 x 165mm)
PS-1FA... ...X... 50 Amp 27 Amp 2 HP 3 HP 5 HP 10 HP 10 HP 20 HP 25 HP
PS-1FB...
PS-AFS...
PS-AFR...
PS-AFC... ...N... 10” x 6-3/4” x 6-1/2” 10” x 8-1/2” x 6-1/2”
PS-AFK... ...F... (254 x 172 x 165mm) (254 x 216 x 165mm)
PS-AFA... 25 Amp 9 amp 0.75HP 1HP 1.5HP 2HP 2HP 5HP 7.5HP
...B...
PS-AFB... ...M...
PS-AFT... 17” x 12” x 7” 17” x 13-3/4” x 7”
PS-AFV... (432 x 305 x 178mm) (432 x 350 x 178mm)
PS-0FS...
PS-0FR...
PS-0FC... ...N... 10” x 6-3/4” x 6-1/2” 10” x 8-1/2” x 6-1/2”
PS-0FK... ...F... (254 x 172 x 165mm) (254 x 216 x 165mm)
PS-0FA... 30 Amp 17 Amp 1.5 HP 2 HP 3 HP 5 HP 5 HP 10 HP 15 HP
...B...
PS-0FB... ...M...
PS-0FT... 17” x 12” x 7” 17” x 13-3/4” x 7”
PS-0FV... (432 x 305 x 178mm) (432 x 350 x 178mm)
PS-1FS...
PS-1FR...
PS-1FC... 10” x 6-3/4” x 6-1/2” 10” x 8-1/2” x 6-1/2”
PS-1FK... (254 x 172 x 165mm) (254 x 216 x 165mm)
PS-1FA... 50 Amp 27 Amp 2 HP 3 HP 5 HP 10 HP 10 HP 20 HP 25 HP
...N...
PS-1FB...
...F or L...
PS-1FT... ...B... 17” x 12” x 7” 17” x 13-3/4” x 7”
PS-1FV... ...M... (432 x 305 x 178mm) (432 x 350 x 178mm)
...N...
...F... 36” x 20” x 10” 36” x 21-3/4 x 10”
PS-4F_... 200 Amp 125 Amp - - - 40 HP 50 HP 100 HP 125 HP
...B... (915 x 508 x 254mm) (915 x 553 x 254mm)
...M...
26
System proS
Technical Data
Standard cable range for Overload Relays
Table#11 & 12
Suffix Thermal Catalog Current Setting
Cable Range
Code Number Range
A TF42-0.13 0.10 ... 0.13 2 x (#18AWG - #10AWG)
27
System proS
Electrical Diagrams
28
System proS
Electrical Diagrams
29
System proS
Electrical Diagrams
30
System proS
Pilot Device Kits (For Across the line Starters)
31
System proS
Pilot Device Kits (For Across the Line Starters)
32
System proS
Pilot Device Kits (ForReversing & 2 Speed Starters)
33
Dimensions
Metal-Enclosed Starters
Dimension
Starter Type
A B C D E
PS-AFS
PS-AFR 10” 6-3/4” 6-1/2” 10-7/8” 4-1/4”
X
PS-AFA (254mm) (172mm) (165mm) (276.26mm) (107.95mm)
PS-AFB
PS-AFT 17” 12” 7” 17-7/8” 9-1/2”
X
PS-AFV (432mm) (305mm) (178mm) (454.03mm) (241.3mm)
PS-0FS
PS-0FR 10” 6-3/4” 6-1/2” 10-7/8” 4-1/4”
X
PS-0FA (254mm) (172mm) (165mm) (276.26mm) (107.95mm)
PS-0FB
PS-0FT 17” 12” 7” 17-7/8” 9-1/2”
X
PS-0FV (432mm) (305mm) (178mm) (454.03mm) (241.3mm)
PS-1FS
PS-1FR 10” 6-3/4” 6-1/2” 10-7/8” 4-1/4”
X
PS-1FA (254mm) (172mm) (165mm) (276.26mm) (107.95mm)
PS-1FB
PS-1FT 17” 12” 7” 17-7/8” 9-1/2”
X
PS-1FV (432mm) (305mm) (178mm) (454.03mm) (241.3mm)
17” 12” 7” 17-7/8” 9-1/2”
PS-2F_ X
(432mm) (305mm) (178mm) (454.03mm) (241.3mm)
17” 12” 7” 17-7/8” 9-1/2”
PS-3F_ X
(432mm) (305mm) (178mm) (454.03mm) (241.3mm)
36” 20” 10” 36-7/8” 17-1/2”
PS-4F_ X
(915mm) (508mm) (254mm) (936.63mm) (444.5mm)
34
Dimensions
Metal-Enclosed Starters
Dimension
Starter Type
A B C D E
PS-AFS
N
PS-AFR 20" 8-1/2" 8" 20-3/4" 5-3/4"
F
PS-AFA (508mm) (216mm) (204mm) (527.05mm) (146.05mm)
B
PS-AFB
PS-AFT N
28" 12" 8" 28-7/8" 9-1/2"
F
(712mm) (305mm) (204mm) (733.43mm) (241.3mm)
PS-AFV B
PS-0FS
N
PS-0FR 20" 8-1/2" 8" 20-3/4" 5-3/4"
F
PS-0FA (508mm) (216mm) (204mm) (527.05mm) (146.05mm)
B
PS-0FB
PS-0FT N
28" 12" 8" 28-7/8" 9-1/2"
F
(712mm) (305mm) (204mm) (733.43mm) (241.3mm)
PS-0FV B
PS-1FS
N
PS-1FR 20" 8-1/2" 8" 20-3/4" 5-3/4"
F
PS-1FA (508mm) (216mm) (204mm) (527.05mm) (146.05mm)
B
PS-1FB
PS-1FT N
28" 12" 8" 28-7/8" 9-1/2"
F
(712mm) (305mm) (204mm) (733.43mm) (241.3mm)
PS-1FV B
N
28" 12" 8" 28-7/8" 9-1/2"
PS-2F_ F
(712mm) (305mm) (204mm) (733.43mm) (241.3mm)
B
N
28" 12" 8" 28-7/8" 9-1/2"
PS-3F_ F
(712mm) (305mm) (204mm) (733.43mm) (241.3mm)
B
N
48" 20" 10" 48-7/8" 17-1/2"
PS-4F_ F
(1220mm) (508mm) (254mm) (1241.43mm) (444.5mm)
B
35
Dimensions
Metal-Enclosed Starters
Dimension
Starter Type
A B C D E
PS-AFS
PS-AFR 10" 8-1/2" 6-1/2" 10-3/4" 5-3/4"
X
PS-AFA (254mm) (216mm) (165mm) (273.05mm) (146.05mm)
PS-AFB
PS-AFT 17” 13-3/4” 7” 17-3/4” 11”
X
PS-AFV (432mm) (350mm) (178mm) (450.85mm) (279.4mm)
PS-0FS
PS-0FR 10" 8-1/2" 6-1/2" 10-3/4" 5-3/4"
X
PS-0FA (254mm) (216mm) (165mm) (273.05mm) (146.05mm)
PS-0FB
PS-0FT 17” 13-3/4” 7” 17-3/4” 11”
X
PS-0FV (432mm) (350mm) (178mm) (450.85mm) (279.4mm)
PS-1FS
PS-1FR 10" 8-1/2" 6-1/2" 10-3/4" 5-3/4"
X
PS-1FA (254mm) (216mm) (165mm) (273.05mm) (146.05mm)
PS-1FB
PS-1FT 17” 13-3/4” 7” 17-3/4” 11”
X
PS-1FV (432mm) (350mm) (178mm) (450.85mm) (279.4mm)
17” 13-3/4” 7” 17-3/4” 11”
PS-2F_ X
(432mm) (350mm) (178mm) (450.85mm) (279.4mm)
17” 13-3/4” 7” 17-3/4” 11”
PS-3F_ X
(432mm) (350mm) (178mm) (450.85mm) (279.4mm)
36” 21-3/4” 10” 36-3/4” 19”
PS-4F_ X
(915mm) (535mm) (254mm) (933.45mm) (482.6mm)
36
Dimensions
Metal-Enclosed Starters
Dimension
Starter Type
A B C D E
PS-AFS
N
PS-AFR 20" 8-1/2" 8" 20-3/4" 5-3/4"
F
PS-AFA (508mm) (216mm) (204mm) (527.05mm) (146.05mm)
B
PS-AFB
PS-AFT N
28” 13-3/4” 7-1/2” 28-3/4” 11”
F
(712mm) (350mm) (191mm) (730.25mm) (279.4mm)
PS-AFV B
PS-0FS
N
PS-0FR 20" 8-1/2" 8" 20-3/4" 5-3/4"
F
PS-0FA (508mm) (216mm) (204mm) (527.05mm) (146.05mm)
B
PS-0FB
PS-0FT N
28” 13-3/4” 7-1/2” 28-3/4” 11”
F
(712mm) (350mm) (191mm) (730.25mm) (279.4mm)
PS-0FV B
PS-1FS
N
PS-1FR 20" 8-1/2" 8" 20-3/4" 5-3/4"
F
PS-1FA (508mm) (216mm) (204mm) (527.05mm) (146.05mm)
B
PS-1FB
PS-1FT N
28” 13-3/4” 7-1/2” 28-3/4” 11”
F
(712mm) (350mm) (191mm) (730.25mm) (279.4mm)
PS-1FV B
N
28” 13-3/4” 7-1/2” 28-3/4” 11”
PS-2F_ F
(712mm) (350mm) (191mm) (730.25mm) (279.4mm)
B
N
28” 13-3/4” 7-1/2” 28-3/4” 11”
PS-3F_ F
(712mm) (350mm) (191mm) (730.25mm) (279.4mm)
B
N
48" 21-3/4" 10" 48-3/4" 19"
PS-4F_ F
(1220mm) (553mm) (254mm) (1238.25mm) (482.6mm)
B
37