Choice 1 is a rolling machine that is 6m long, 1.5m wide, costs $27,500 total, and would take 52 days to arrive once ordered. Choice 2 is two separate rolling machines that are each 10m long, 1.5m wide, costs $28,500 total, and would take 72 days to arrive once ordered. Both choices would include a one-year warranty and ISO certification, but Choice 2 has a higher powered motor and PLC control system from a Japanese brand.
Choice 1 is a rolling machine that is 6m long, 1.5m wide, costs $27,500 total, and would take 52 days to arrive once ordered. Choice 2 is two separate rolling machines that are each 10m long, 1.5m wide, costs $28,500 total, and would take 72 days to arrive once ordered. Both choices would include a one-year warranty and ISO certification, but Choice 2 has a higher powered motor and PLC control system from a Japanese brand.
Choice 1 is a rolling machine that is 6m long, 1.5m wide, costs $27,500 total, and would take 52 days to arrive once ordered. Choice 2 is two separate rolling machines that are each 10m long, 1.5m wide, costs $28,500 total, and would take 72 days to arrive once ordered. Both choices would include a one-year warranty and ISO certification, but Choice 2 has a higher powered motor and PLC control system from a Japanese brand.
the factory can be attached as a separate document Machine Rolling machine 60-200 Rolling machine 100-200 Section Perfil: C type ( X*Y*Z) Requirement: 200*50*15mm X=60-200mm Y=50-60mm Z is according to the width of the steel sheet. The choice 2 needs 45 days to make 60-200mm, and 30 days to make 100-200mm Material 1-3mm 1.5-3mm thickness Motor 15kw 18.5kw With the requirements power of the thickness 3mm, the machine needs higher power, the choice two can provide higher power to make the production more stable Hydraulic 7.5kw 5.5kw There are some parts power easy to be broken, we can provide them, also the oil needed for the hydraulic motor, usually need to be replaced once a year (if the machine needs to work everyday) usually after 8 hours working, the oil need to cool down a bit Producing 10m/min (max 20m/min) 15-20m/min Usually its better to set speed a bit slower speed and not change the speed often Material of Cr12 the cutting knife Control PLC Mitsubishi PLC & transducer Choice 2 provide a system better PLC which is a good Japanese brand Both choices use touching screen, can set the length of the steel from the control, Language: English, Chinese Voltage 380V 380V Size The main part of the machine The main part contains 15 groups The total length of the contains 11 groups The entire machine: choice 1 is longer than Length: 6m L*H*W=10*0.8*1.5m 7.5m Width: 1.5m Choice 2 can be separate into 2 parts Choice 1 can not be separated Weight 4t 7.5t Container 40G (a big container) 24G(a small container) Because choice 2 can for be separated into 2 internation parts, it can be shipped al by a small container shipment Machine 22 000 25 000 cost Shipment 5500 3500 cost (including the shipment in china and from china to port Arica Total cost 27 500 28 500
Certificate ISO12100 Choice 2 also has the
similar certificate Time Producing time (10days) + Producing time (30days) + The time you can shipment arrange (approx. shipment arrange (approx. 7days) receive the machine in 7days) + international shipment + international shipment (approx. the port ARICA since (approx. 35 days) = 52 days 35 days) = 72 days your order the machine Warrant One year provide the spare parts One year provide the spare parts For this machine, it’s for free for free not so expensive, the If you need the supplier to send If you need the supplier to send ppl supplier don’t provide ppl to repair the machine, you to repair the machine, you need to the last 3% of th need to pay all the travel cost pay all the travel cost machine cost pay in one year, but if the client really need, we can guarantee that to let him pay us the last 3% in one year. Payment The order: 12100 The order: 11000 Order the machine: The rest pay in 5 days after the The rest pay in 20 days after the 30% of the machine order: 15400 order: 175000 cost and the cost of the shipment, when the machine is ready, we will go to run the machine and check everything, the rest 70% of the machine cost need to be sent to us one week before the machine is ready (there is delay for the international money transfer)