Professional Documents
Culture Documents
Indicators Catalog PDF
Indicators Catalog PDF
1 CONTINUED ->
GSE 350 I.S. 355 I.S. Series Indicator
CONTENTS
pg 49 GSE 350 I.S. 355 I.S. Brochure
pg 53 GSE 350 I.S. 355 I.S. Specification Sheet
2
ZM201 SERIES
ZM
201 SERIES
Basic indicators with
powerful functionality
Simple Yet
Powerful
ZM201 Series indicators are ideal for applications that require a basic weighing
indicator for performing Zero, Tare and Print functions. Their simple yet powerful
design makes them the perfect choice for connecting with bench, platform or
floor scale and bin/tank/hopper (vessel) scales.
Signal Processor
For applications where data is essential for logging and processing, but
no visual weight display is required, the signal processor provides an ideal
alternative to a standard weight indicator.
The ZM201 Signal Processor is designed to transmit data to a host device
through a preconfigured data stream via Ethernet using Modbus/TCP or
from the Serial ports. The host device receives data and can create an
application specific bi-directional communication.
An alternative to the traditional weight indicator, the signal processor is ideal
for applications such as batching, blending, system process control or inventory
which require only an accurate signal for data logging and recording.
ZM201 SERIES
www.averyweigh-tronix.com
Avery Weigh-Tronix is an ITW company
Avery Weigh-Tronix is a trademark of the Illinois Tool Works group of companies whose ultimate parent company is Illinois Tool Works Inc (“Illinois
Tool Works”). Copyright © 2015 Illinois Tool Works. All rights reserved. This publication is issued to provide outline information only and may not be
regarded as a representation relating to the products or services concerned. This publication was correct at the time of going to print, however Avery zm201_L_501106.indd (C&D)
Weigh-Tronix reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time. V1 AWT35-501106
ZM
201 SERIES
Indicators for daily
weighing tasks with
powerful built-in
applications.
Technical Specification
DESCRIPTION
ZM201 Series indicators are ideal for applications that require a basic weighing indicator for performing
Zero, Tare and Print functions. Their simple yet powerful design makes them the perfect choice for
connecting with bench, platform or floor scale and bin/tank/hopper (vessel) scales.
SPECIFICATIONS
GENERAL
Operating Applications General weighing, general weighing with accumulation, checkweighing, counting, peak measurement,
batching and remote display
Calibration Two to five points stored
Analog To Digital Measurement Rate 80 Hz
Unit Of Measure Two, configurable (pounds, kilograms, ounce, gram, pound/ounce, custom)
Capacity Selections 9,999,999 with decimal located zero to five places
Incremental Selections Multiples and sub-multiples of 1, 2, 5
Programmable Selections Zero range, motion detection, automatic zero tracking, five point linearization
Time And Date Battery backed up time/date/year (12 hr or 24 hour format)
Internal Resolution 53,687,100 counts per mV/V per second
Digital Filtering Harmonizer filtering with adaptable constant and threshold
Self Diagnostics Display, keys, inputs, outputs, serial port
ELECTRICAL
Power Requirements Line voltage: 90 VAC to 264 VAC (110-240 VAC nominal), frequency 50 or 60 Hz, 12 to 36 VDC
Power consumption: estimated at 150 mA at 12 VDC for one weight sensor and
180 mA at 12 VDC for four weight sensors
Excitation 5 VDC, short circuit protected
Supports up to four 350 ohm weight sensors
4 or 6 conductors with sense leads
Detachable plug connectors
Analog Signal Input Range -1 m/V/V to 5 mV/V
Analog Signal Sensitivity 0.1 µV/V/divisions minimum
0.5 µV/V/divisions recommended
USER INTERFACE
Operational Keys Tare, Select, Zero, Print, Units, F1, On/Off (no keys on signal processor)
Status Annunciators Center of Zero, Motion, Gross, Net, Tare, Count, Print, Battery Status, Setpoint 1, Setpoint 2, Setpoint 3,
Over/Under/Accept bar graph or fill bar graph, lb, kg, Preset Tare, Total,
(Custom unit of measure– lb/oz, ton, gram, configurable), Active Ethernet connection
Keypad 7 key chemical resistant polycarbonate
ZM201 SERIES Technical Specification
.45 [11.43 mm] 7.50 [190.50 mm]
Display ABS: TN backlit 7-digit seven segment display with 1.2 in /108.7
30 mm high digits
4.28 in
mm
3.88 in
98.4 mm
Stainless steel: TN backlit 7-digit seven segment display with 0.5 in / 13 mm high digits 2.03 [51.59 mm]
Panel mount: TN backlit 7-digit seven segment display with 0.5 in / 13 mm high digits
Signal processor: No display 7.90 in
200.7 mm
2.875 in
73.0 mm
Displays have annunciators for status and mode identification 4X R.16 [R4.00 mm]
4.28 in
4.78 [121.41 mm] 3.88 in
Remote Inputs Three logic level inputs for Zero, Print, 108.7 mm 98.4 mm
Standard Outputs Three set point outputs, open collector design 7.90 in
200.7 mm
.99 [25.04 mm]
2.11 in
53.5 mm 2.11 [53.50 mm]
8.40 [213.36 mm]
www.averyweigh-tronix.com
Avery Weigh-Tronix is an ITW company
Avery Weigh-Tronix is a trademark of the Illinois Tool Works group of companies whose ultimate parent company is Illinois Tool Works Inc (“Illinois
Tool Works”). Copyright © 2017 Illinois Tool Works. All rights reserved. This publication is issued to provide outline information only and may not be
regarded as a representation relating to the products or services concerned. This publication was correct at the time of going to print, however Avery zm201_spec_501112.indd
Weigh-Tronix reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time. V4 AWT35-501112
ZM205 INDICATOR
ZM
205 INDICATOR
Designed for the busy, demanding
airport check-in environment
Fast Baggage
Weighing
At a busy airport check-in desk, speed and providing fast, accurate weight readings.
accuracy are vital. Fast, precise processing The ZM205 includes both operator-facing
of baggage can have a direct impact on and passenger-facing display units and is
revenue, health and safety and customer designed to interface with a wide range of
service. The ZM205 meets these needs by scale bases, PCs and printers.
RS232
Serial
PC
Profibus
ZM205 Operator Display Option
Controller
Printer
Floor Scale Conveyor Scale
or Movement Control
Conveyor Scale
ZM205 Passenger Display
Bags
ZM205 INDICATOR
Specifications
For full specifications, see the ZM205 technical specifications document.
ELECTRICAL
Power Requirements Line voltage: 90 VAC to 264 VAC (110-240 VAC nominal), frequency 50 or 60 Hz, 12 to 36 VDC
Power consumption: estimated at 200 mA at 12 VDC for one weight sensor (including passenger display)
and 220 mA at 12 VDC for four weight sensors (including passenger display).
Excitation 5 VDC, short circuit protected
Supports up to four 350 ohm weight sensors
4 or 6 conductors with sense leads
Detachable plug connectors
Analog Signal Input Range -1 m/V/V to 5 mV/V
Analog Signal Sensitivity 0.1 µV/V/divisions minimum
0.5 µV/V/divisions recommended
USER INTERFACE
Operational Keys (Operator Indicator) CE/C*, Select, Zero, M-, M+, F1 (no keys on passenger display)
Status Annunciators Center of Zero, Motion, Gross, Total, Over, Bag, lb, kg, active Ethernet connection
Keypad 6 key chemical resistant Mylar
Display Operator and passenger units: TN backlit 7-digit seven segment display with 0.5 in / 13 mm high digits
Display Rate Selectable (1, 2, 5, 10) times per second
PHYSICAL
Operating Temperature Compliance with legal-for-trade requirements
Approval: 14° to 104° F / -10° to 40° C at 10 to 90% relative humidity, non-condensing
Industrial: -4° to 140° F / -20° to 60° C at 10 to 90% relative humidity, non-condensing
Enclosure IP66 stainless steel panel mount
Shipping Weight 8.01 lb / 3.63 kg
Dimensions See drawing
4.28 in
108.7 mm
3.88 in
98.4 mm
More online
www.averyweigh-tronix.com/zm205
7.90 in 2.875 in ›› Technical specifications
200.7 mm 73.0 mm
Measurement ›› User manuals
Operator display Canada Approved
AM-5902C ›› News and information
4.28 in 3.88 in
108.7 mm 98.4 mm
7.90 in 2.11 in
200.7 mm 53.5 mm
Passenger display
4.28 in 3.88 in
108.7 mm 98.4 mm
7.90 in 2.11 in
200.7 mm 53.5 mm
5.78 in www.averyweigh-tronix.com
146.8 mm
Technical Specification
DESCRIPTION
The ZM205 meets airport check-in desk needs by
providing fast, accurate weight readings. Includes
both operator-facing and passenger-facing
display units and is designed to interface with a
wide range of scale bases, PCs and printers. The
ZM205 operator indicator can be fitted with an
optional Profibus or Relay Control kit which can
interface with a baggage conveyor system to
ZM205 Passenger Display automate the movement of the conveyor.
SPECIFICATIONS
GENERAL
Operating Applications Baggage weighing
Calibration Two to five points stored
Analog To Digital Measurement Rate 80 Hz
Unit Of Measure 2, configurable (pounds, kilograms)
Capacity Selections 9,999,999 with decimal located zero to five places
Incremental Selections Multiples and sub-multiples of 1, 2, 5
Programmable Selections Zero range, motion detection, automatic zero tracking, five point linearization
Time And Date Battery backed up time/date/year (12 hr or 24 hour format)
Internal Resolution 53,687,100 counts per mV/V per second
Digital Filtering Harmonizer filtering with adaptable constant and threshold
Self Diagnostics Display, keys, inputs, outputs, serial port
ELECTRICAL
Power Requirements Line voltage: 90 VAC to 264 VAC (110-240 VAC nominal), frequency 50 or 60 Hz, 12 to 36 VDC
Power consumption: estimated at 150 mA at 12 VDC for one weight sensor (including passenger
display) and 180 mA at 12 VDC for four weight sensors (including passenger display).
Excitation 5 VDC, short circuit protected
Supports up to four 350 ohm weight sensors
4 or 6 conductors with sense leads
Detachable plug connectors
Analog Signal Input Range -1 m/V/V to 5 mV/V
Analog Signal Sensitivity 0.1 µV/V/divisions minimum
0.5 µV/V/divisions recommended
ZM205 INDICATOR Technical Specification
USER INTERFACE
Operational Keys (Operator Indicator) CE/C*, Select, Zero, M-, M+, F1 (no keys on passenger display)
Status Annunciators Center of Zero, Motion, Gross, Total, Over, Bag, lb, kg, active Ethernet connection
Keypad 6 key chemical resistant polycarbonate
Display Operator unit: TN backlit 7-digit seven segment display with 0.5 in / 13 mm high digits
Passenger unit: TN backlit 7-digit seven segment display with 0.5 in / 13 mm high digits
Display Rate Selectable (1, 2, 5, 10) times per second
INPUT/OUTPUT
Remote Inputs Three logic level inputs for Zero, Units, Print, Select, Tare, M+, M-, or Print Hold
Standard Outputs Three set point outputs, open collector design
Communications Two serial ports:
- Comm 1 RS232, no handshaking
- Comm 2 RS232, no handshaking
- Protocols, SMA, Broadcast, Enquire, Remote Display and NCI
Ethernet: used for passenger display connection
Circuitry Protection RFI, EMI and ESD protection
Optional Profibus-DP V1 interface
Output registers include current weight, stability indication and status information. Input register allows external
Tare. Baud rate is auto-sensing within the ProfiBus specification.
Internal relay switch
Normally open contact relay that supports 8A at 250VAC.
PHYSICAL
Operating Temperature Compliance with legal-for-trade requirements
Approval: 14° to 104° F / -10° to 40° C
at 10 to 90% relative humidity, non-condensing 4.28 in 3.88 in
108.7 mm 98.4 mm
Industrial: -4° to 140° F / -20° to 60° C
at 10 to 90% relative humidity, non-condensing
Enclosure IP66 stainless steel panel mount 7.90 in 2.875 in
200.7 mm 73.0 mm
Shipping Weight 8.01 lb / 3.63 kg Operator Display
Dimensions See drawings
APPROVALS
4.28 in 3.88 in
Agencies NTEP (US) Class III/IIIL 10,000 d (CC# 13-017) 108.7 mm 98.4 mm
www.averyweigh-tronix.com/zm205
7.90 in 2.11 in
200.7 mm 53.5 mm
›› Technical
specifications
5.78 in
›› User manuals 146.8 mm
›› News and
information
6.50 in
165.0 mm
30°
9.65 in 3.74 in
245.0 mm 4.16 in
95.0 mm 105.6 mm
4.01 in
101.8 mm
9.63 in
www.averyweigh-tronix.com
244.6 mm
8.25 in 3.55 in
209.6 mm 90.2 mm
4.0 in
ZM300 SERIES
Indicators to measure
and control your daily
operations.
ZM
ZM
300SERIES
300 SERIES
Built for today’s needs and
tomorrow’s challenges
Leading Edge
Indicators
The Avery Weigh-Tronix ZM300 series is a range of indicators
for industrial weighing applications. These high performance,
multi-function indicators will analyze, store, display and
transmit data, providing you with greater visibility of
weighing performance. Highly adaptable and available
with a choice of display technologies and enclosures,
ZM300 series indicators give you the flexibility
required to suit different applications
and meet your business needs.
ZM300 SERIES
Remote operation
ZM300 series indicators can be used as remote displays,
enabling easy and convenient viewing of weight information
where you need it.
Remote push buttons or foot controls can be attached to all the
ZM300 series indicators, improving productivity by enabling
operators to activate the indicator remotely in order to perform
Zero, Print, Tare, Units, or F1 functions.
Position 1
Position 3
on a turntable with a rotational speed of 5 ±1 revolutions per minute.
The product is then sprayed at close range at a rate of approximately
4 gallons/16 liters per minute with water pressure of between 1160-
Test Specimen
1450 psi, at a temperature of 176°F/80°C. The nozzle from which the
Under Depressure
Turntable Recirculating
Dust
ZM300 SERIES
Connectivity
The ZM300 series of indicators offers multi-connectivity, hardware as well as offering the option of using a USB
ensuring compatibility and communication between storage device to transfer data to a back office PC for
old and new peripheral technologies. An Ethernet integration and management.
port is included as standard, supporting fast and Analog output, USB device, Current Loop, RS485/
efficient data transfer both locally or across the globe RS422 and Ethernet wireless options are also available,
via an IP network, while two RS232 serial interface enabling you to utilize the same user-friendly interface
ports provide for data transfer to older equipment. A for numerous applications with a range of connectivity
USB host port facilitates communication with printer options to suit your business requirements.
Ethernet Wireless
USB Device
USB
Analog
ZM301/303/305
RS232 (2)
Current Loop and
RS485/RS422
Options
The indicators can be fitted with one internal optional board assembly
providing more adaptability for communicating with peripheral devices.
More online
www.averyweigh-tronix.com/indicators
›› Technical specifications
›› User manuals
›› Breaking information
www.averyweigh-tronix.com
Avery Weigh-Tronix is an ITW company
Avery Weigh-Tronix is a trademark of the Illinois Tool Works group of companies whose ultimate parent company is Illinois Tool Works Inc (“Illinois
Tool Works”). Copyright © 2017 Illinois Tool Works. All rights reserved. This publication is issued to provide outline information only and may not be
regarded as a representation relating to the products or services concerned. This publication was correct at the time of going to print, however Avery zm300series_L_500828.indd
Weigh-Tronix reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time. V5 AWT35-500828
ZM
300 SERIES
Indicators to measure
and control your daily
operations.
Technical Specification
ETHERNET
ZM303
IP69K Stainless Steel Enclosure
TN Display USB
SERIAL
ZM303
Panel Mount Enclosure
IBN Display
ZM301
Aluminum Enclosure
IBN Display
DESCRIPTION
Highly adaptable and available with a choice of display technologies and enclosures,
these high performance, multi-function indicators give you the flexibility required to suit
different applications.
Suitable for the office and high pressure and heavy washdown environments, the ZM300
series will analyze, store, display and transmit data across a range of applications.
SPECIFICATIONS
GENERAL
Operating Applications General weighing, accumulation, check weighing, counting, peak measurement, batching and
remote display
Unit of Measure Six, configurable (Pounds, Kilograms, Ounce, Gram, Pound/Ounce, Custom)
Capacity Selections 9,999,999 with decimal located zero to five places
Incremental Selections Multiples and sub-multiples of 1, 2, 5
Programmable Selections Zero range, motion detection, automatic zero tracking, five point linearization
Time and Date Battery backed up time/date/year (12 hr or 24 hour format)
Calibration Two to five points stored
Analog to Digital Measurement Rate 80 Hz
Internal Resolution 53,687,100 counts per mV/V per second
Digital Filtering Harmonizer filtering with adaptable constant and threshold
Self Diagnostics Display, keys, inputs, outputs, serial port
1
ZM300 SERIES Technical Specification
USER INTERFACE
Keypad ZM301: 6 key chemical resistant keypad with metal domed tactile feedback
ZM303: 24 key chemical resistant keypad with metal domed tactile feedback
Operational Keys ZM301: Zero, Print, Units, Tare, Select, F1
ZM303: Zero, Print, Units, Tare, Select, Sample, Target, ID, Start, Stop, 0-9, Decimal, Clear, F1, Setup
Status Annunciators Center of Zero, Motion, Gross, Net, Tare, Count, Print, Battery status, Set point 1,2,3, Over/Under/Accept bar
graph or fill bar graph, LB, KG, Gram, Oz, Preset Tare, Quantity, (Custom unit of measure – Ton, Tory Ounce,
Tonne, Feet/Meters, etc), Active Ethernet connection.
Display IBN illuminated: 7 digit, nine segment display, green on black background for indoor use
TN backlit (ZM303 only): 7 digit nine segment display, black on green background ideal for outdoor/indoor use
0.8” (20 mm) high digits
Annunciators for status and mode identification
Sortbar/Checkweigher segments
Display Rate Selectable (1, 2, 5, 10, 20) times per second
Under/over/accept bar
or filling status bar
Motion/instability
IBN display – Ideal for indoor use TN display – Ideal for outdoor/indoor use (ZM303 only)
2
PHYSICAL
Enclosures Stainless steel: 304 brushed stainless steel (IP69K certified) with GORE® Vent ventilation and tilt stand with
provisions for desk, wall and column mounting
Aluminum: Aluminum black powder painted IP20 with rubber feet
Panel mount: Stainless steel panel mount IP66
Operating Temperature 14° F to 104° F / -10° C to 40° C (Compliance with legal for trade requirements)
-4° F to 140° F / -20° C to 60° C (industrial)
10 to 90% humidity non condensing
Shipping Weight Stainless steel: 8.09 lb (4.05 kg)
Aluminium: 4.75 lb (2.37 kg)
Panel mount: 6.53 lb (3.27 kg)
Dimensions (L X W X H) Stainless steel: 9.6” x 5” x 8.8” (243 mm x 127 mm x 223 mm)
Aluminum: 8” x 3.2” x 6.3” (203 mm x 81 mm x 160 mm)
Panel mount: 8.7” x 3.4” x 6.9” (221 mm x 86 mm x 175 mm)
9.63
(244.6 mm) 3.55
8.25 (90.2 mm)
(209.6 mm)
(165.1 mm)
6.50
(222.3 mm)
8.75
8.43 5.0
(214.1 mm) (127.0 mm)
Stainless Steel
3.75
8.00
(82.6 mm)
(203.2 mm)
(160.3 mm)
6.31
Aluminum
8.69 3.49
(220.7 mm) (88.1 mm)
(176.3 mm)
(150.9 mm)
6.94
5.94
Panel Mount
3
ZM300 SERIES Technical Specification
INPUT/OUTPUT
Remote Inputs Three logic level inputs for Zero, Print, Tare, Units or F1
Standard Outputs Three set point outputs, open collector design
Serial Ports Two serial ports: Or - Comm 1 RS232 full duplex with handshaking
- Comm 1 RS232 full duplex - Comm 2 Not available
- Comm 2 RS232 full duplex Programmable serial response to ASCII input
SMA protocol, broadcast, enquire
Ethernet The Ethernet port can be configured to support five independent devices, it supports DHCP client/server and
Ethernet sockets plus it supports all the serial protocols
Fieldbus Ethernet IP and Modbus TCP
Optional Analog output
Current Loop/RS485/RS422
USB Device
Internal Wireless 802.11b/g
ELECTRICAL
Power Requirements Line voltage: 90-264 VAC (110-240 VAC nominal), frequency 50 or 60 Hz, 12 to 36 VDC
Power consumption: estimated at 200 mA at 12 VDC for one weight sensor and 250 mA at 12 VDC for six weight sensors.
Excitation 5 VDC, short circuit protected
Supports up to six 350 ohm weight sensors
4 or 6 conductors with sense leads
Detachable plug connectors
Analog Signal Input Range -1 m/V/V to 5 mV/V
Analog Signal Sensitivity 0.1 µV/V/divisions minimum
0.5 µV/V/divisions recommended
Circuitry Protection RFI, EMI and ESD protection
OPTIONS
PC Card (choose one) Analog output card: 0-5 VDC, 0-10 VDC and 4-20 mA
Current Loop Card: Current Loop and RS485/RS422
USB device card: Provides USB interface to PC
Wireless internal card: 802.11b/g wireless data communications kit with antenna
External Battery Pack Attachable external battery pack with on/off. Uses four D batteries providing 12 hours operation on a single
weight sensor system and 11 hours on a four weight sensor system
ZM-OPTO Provides setpoint interface
USB Watertight Gland Rubberized and sealed with 6” lead
Ethernet Watertight Gland Rubberized and sealed with 6” lead
Stand Kit For aluminum enclosure models
APPROVALS
Patent US Patent 672,262
Agencies NTEP (US) Class III/IIIL 10,000 d (CC# 11-096)
OIML (European and UK) Class III 6,000 d
(R76/2006-GB1-12.04)
Measurement Canada (AM-5841C) Measurement
Australia (NMI S570) Canada Approved
MID R61
New Zealand (MCA 2100)
CE
UL/C-UL
EC
IP69K (case)
www.averyweigh-tronix.com
Avery Weigh-Tronix is an ITW company
Avery Weigh-Tronix is a trademark of the Illinois Tool Works group of companies whose ultimate parent company is Illinois Tool Works Inc (“Illinois Tool
Works”). Copyright © 2016 Illinois Tool Works. All rights reserved. This publication is issued to provide outline information only and may not be regarded
as a representation relating to the products or services concerned. This publication was correct at the time of going to print, however Avery Weigh-Tronix zm300series_spec_500829.indd
reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time. V7 AWT35-500829
4
ZM
305 SERIES
Indicators to measure
and control your
daily operations.
Technical Specification
ETHERNET
ZM305
IP69K Stainless Steel Enclosure
IBN Display USB
SERIAL
ZM305 GTN
IP69K Stainless Steel Enclosure
IBN Display
DESCRIPTION
These high performance, multi-function indicators give you the flexibility required to suit
your applications.
Suitable for the office, dusty, wet or high pressure and heavy washdown environments,
the ZM305 series will analyze, store, display and transmit data across a range of technology
methods to meet your specific installation.
SPECIFICATIONS
GENERAL
Operating Applications ZM305 Standard General weighing, in-motion weighing, accumulation, check weighing, counting,
peak measurement, batching and remote display
ZM305 GTN Inbound-Outbound, 1000 Fleet In/Out transaction storage and calculations
Unit of Measure Six, configurable (Pounds, Kilograms, Ounce, Gram, Pound/Ounce, Custom), up to four can be active
Capacity Selections 9,999,999 with decimal located zero to five places
Incremental Selections Multiples and sub-multiples of 1, 2, 5
Programmable Selections Zero range, motion detection, automatic zero tracking, five point linearization
Time and Date Battery backed up time/date/year (12 hr AM/PM or 24 hour format)
Calibration Two to five points stored
Analog to Digital Measurement Rate 80 Hz
Internal Resolution 53,687,100 counts per mV/V per second
Digital Filtering Harmonizer filtering with adaptable constant and threshold
Self Diagnostics Display, keys, inputs, outputs, serial port, Scale A to D, USB port and option cards
Dynamic Weighing Minimum nominal weigh time 100 milliseconds, recommended minimum three hundred milliseconds.
1
ZM305 SERIES Technical Specification
USER INTERFACE
Keypad 24 key chemical resistant keypad with metal domed tactile feedback
Operational Keys ZM305: Zero, Print, Units, Tare, Select, Sample, Target, ID, Start, Stop, 0-9, Decimal, Clear, Setup and F1
ZM305 GTN: Zero, Print, Units, Tare, Select, Fleet, Setup, ID, In/Out, Report, Start, Stop, 0-9, Decimal and Clear
Status Annunciators Center of Zero, Motion, Gross, Net, Tare, Count, Print, Battery status, Set point 1,2,3, Over/Under/Accept bar graph or
fill bar graph, lb, kg, gram, oz, Preset Tare, Quantity, Custom unit of measure, Active Ethernet connection.
Display IBN illuminated: seven digit, nine segment display, green characters with black background 0.8” (20 mm) high digits
Annunciators for status and mode identification
Sortbar/Checkweigher segments
Display Rate Selectable (1, 2, 5, 10, 20) times per second
Under/over/accept bar
or filling status bar
Motion/instability
PHYSICAL
Enclosures Stainless steel: 304 brushed stainless steel (IP69K certified) with GORE® Vent ventilation and tilt stand with provisions
for desk, wall and column mounting
Operating Temperature 14° F to 104° F / -10° C to 40° C (Compliance with legal for trade requirements)
-4° F to 140° F / -20° C to 60° C (industrial)
10 to 90% humidity non condensing
Shipping Weight Stainless steel: 8.09 lb (4.05 kg)
9.63
(244.6 mm) 3.55
8.25 (90.2 mm)
(209.6 mm) 5
(165.1 mm)
6.50
(222.3 mm)
8.75
8.43 5.0
Stainless Steel (214.1 mm) (127.0 mm)
2
INPUT/OUTPUT
Remote Inputs Three logic level inputs for Zero, Print, Tare, Units, F1, and more
Standard Outputs Three set point outputs
Serial Ports Two serial ports: Or - Comm 1 RS232 full duplex with handshaking
- Comm 1 RS232 full duplex - Comm 2 Not available
- Comm 2 RS232 full duplex Programmable serial response to ASCII input
SMA protocol, broadcast, enquire
NCI protocol
USB Host Printer
USB flash memory
Ethernet The Ethernet port can be configured to support five independent devices, it supports DHCP client/server and
Ethernet sockets plus it supports all the serial protocols
Fieldbus Ethernet IP and Modbus TCP
Optional Analog output
Current Loop/RS485/RS422
USB Device
Internal (Ethernet) Wireless 802.11b/g
Extreme lightning protection
ELECTRICAL
Power Requirements Line voltage: 90-264 VAC (110-240 VAC nominal), frequency 50 or 60 Hz, 12 to 36 VDC
Power consumption: estimated at 250mA at 12VDC for one 350 ohm weigh sensor and 550mA at 12VDC for fourteen 350
ohm weigh sensors.
Excitation 10 VDC, short circuit protected
Supports up to fourteen 350 ohm weight sensors
4 or 6 conductors with sense leads
Detachable plug connectors
Analog Signal Input Range -1 m/V/V to 5 mV/V
Analog Signal Sensitivity 0.1 µV/V/divisions minimum
0.5 µV/V/divisions recommended
Circuitry Protection RFI, EMI and ESD protection
OPTIONS
PC Card (choose one) Analog output card: 0-5 VDC, 0-10 VDC and 4-20 mA
Current Loop Card: Current Loop and RS485/RS422
USB device card: Provides USB interface to PC
Wireless (Ethernet) internal card: 802.11b/g wireless data communications kit with antenna
ZM-OPTO Provides setpoint interface
USB Watertight Gland Rubberized and sealed
Ethernet Watertight Gland Rubberized and sealed
APPROVALS
Patent US Patent 672,262
Agencies EC UK2923 & GB-1446 ≤10,000divs single interval Class III, ≤1000divs single interval Class IIII
R61 UK/0126/0122 & GB-1447 ≤10,000divs, Ref(x)=0.02, Scale Interval ≥ 0.5g
NTEP (US) Class III/IIIL 10,000 d (CC# 11-096A1)
OIML R76 Class III and IIII
Measurement Canada (AM-5841C)
Australia (NMI S570)
New Zealand (MCA 2100) Measurement
CE Canada Approved
UL/C-UL
IP69K (case)
www.averyweigh-tronix.com
Avery Weigh-Tronix is an ITW company
Avery Weigh-Tronix is a trademark of the Illinois Tool Works group of companies whose ultimate parent company is Illinois Tool Works Inc (“Illinois Tool
Works”). Copyright © 2016 Illinois Tool Works. All rights reserved. This publication is issued to provide outline information only and may not be regarded
as a representation relating to the products or services concerned. This publication was correct at the time of going to print, however Avery Weigh-Tronix zm305series_spec_501255.indd
reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time. V4 AWT35-501255
3
ZM400 SERIES
ZM
400 SERIES
Weight indicators for
advanced applications
Performance
viewing angles. To the right of the screen is a dot
matrix Graphic Array area which can be used to di
a combination of weight data, text and graphics. T
dot matrix area can be pre-programmed to displa
Human Machine Interface (HMI) messages or prom
for the scale operator in a range of languages.
gy
isplay
The
ay Multi-scale input Harmonizer™ filtering Inbound/outbound
mpts
Supports up to 16 analog The fully adjustable Harmonizer™ Users can store Gross, Tare and Net
weight sensors and can filtering system improves weights against container/vehicle
receive two scale input signals, weighing accuracy. This IDs, providing inbound/outbound
Bin filling allowing users to collect and programmable filter system can weighing. These indicators are
manipulate data from more automatically detect and cancel ideal for any application where
than one scale at a time. out specific types of interference container weights need to be
caused by mixing operations, recorded against an alphanumeric
vibration or machine “noise”. tare ID/register.
ide a
user- In-motion weighing Analog and Digital Remote operation
d Supports in-motion weighing, In addition to connecting with ZM400 series indicators can be
ur making it an ideal solution for analog based weight sensors, used as remote displays, using
conveyor scales. ZM400 series ZM400 indicators can also perform remote push buttons or foot
indicators can connect with up high resolution measurements control operation to facilitate easy
ness to 16 analog weight sensors and from the Avery Weigh-Tronix BSQ and convenient viewing of weight
can connect to two scales. digital bench scale. information where you need it.
STANDARD CONNECTIVITY Scale
OPTIONAL CONNECTIVITY
Interface
Ethernet Wireless
Client/Server Sockets
Ethernet/IP
Modbus/TCP
FTP & SMTP USB Device
USB
Analog
AC/DC
I/O Relays
RS232 (2)
Current Loop and
DeviceNet™ Profibus® RS485/RS422
ZM401/405
Options
Option kits can be added to extend the functionality of the ZM400 series:
I/O relay
›› External I/O interface kit Lightning Protection
›› DC Output, 4 relays 3-60VDC at 2A kit ›› Severe Transient Voltage Suppressor (STVS)
Extreme Lightning protection
›› DC Input, 4 Inputs 3-30VDC kit
›› AC Output, 4 relays 20-240VAC at 1A kit (IP69K models)
AC Input, 4 Inputs 120-240VAC kit (IP69K models)
Connectivity
›› Wireless Ethernet 802.11 b/g kit
›› USB Device kit
›› Profibus kit
›› DeviceNet
›› Analog Output Watertight Glands
›› Current Loop and RS485/RS422 ›› Enables USB and/or Ethernet connection without
compromising the indicator’s resistance to water ingress
www.averyweigh-tronix.com
Avery Weigh-Tronix is an ITW company
Intel and Intel Core are trademarks of Intel Corporation in the U.S. and/or other countries
Avery Weigh-Tronix is a trademark of the Illinois Tool Works group of companies whose ultimate parent company is Illinois Tool Works Inc (“Illinois
Tool Works”). Copyright © 2017 Illinois Tool Works. All rights reserved. This publication is issued to provide outline information only and may not be
regarded as a representation relating to the products or services concerned. This publication was correct at the time of going to print, however Avery zm400_L_501390.indd
Weigh-Tronix reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time. V3 AWT35-501390
ZM
400 SERIES
Indicators that adapt to
your application and
provide measurement
and control to your
operations.
Technical Specification
ETHERNET
ZM401
IP69K Stainless Steel Enclosure
IBN Display USB
SERIAL
ZM405
IP69K Stainless Steel Enclosure
IBN Display
DESCRIPTION
These high performance, multi-function programmable indicators give you the flexibility
to adapt them for your applications.
Suitable for the office, dusty, wet or high pressure and heavy washdown environments,
the ZM400 series can display analyze, store, and transmit data across a range of
technology methods to meet your specific installation.
SPECIFICATIONS
GENERAL
Unit of Measure Four active choices (Pounds, Kilograms, Ounce, Gram, Pound/Ounce, Custom)
Capacity Selections 9,999,999 with decimal located zero to five places
Incremental Selections Multiples and sub-multiples of 1, 2, 5
Multi Range/Multi Interval Up to three independent weight ranges and divisions
Programmable Selections Zero range, motion detection, automatic zero tracking, eight point linearization
Time and Date Battery backed up time/date/year (12 hour AM/PM or 24 hour format)
Calibration Two to ten points
Analog to Digital Measurement Rate 100 Hz
Internal Resolution 53,687,100 counts per mV/V per second
Digital Filtering Harmonizer filtering with adaptable constant and threshold
Self Diagnostics Display, keys, inputs, outputs, serial port, scale A to D, USB port and option cards
Dynamic Weighing Minimum nominal weigh time 100 milliseconds, recommended minimum three hundred milliseconds
Programming Language Avery Weigh-Tronix LUA, GSE Macro
1
ZM400 SERIES Technical Specification
USER INTERFACE
Keypad ZM401 6 key and ZM405 24 key chemical resistant keypad with metal domed tactile feedback and audio
confirmation when pressed
Operational Keys ZM401: Zero, Print, Units, Tare, Select, and F1
ZM405: Zero, Print, Units, Tare, Sample, Setup, F1/ID, Scale, Target, Start, Stop, 0-9, Alpha, Decimal, Clear, and
common symbols
Status Annunciators Center of Zero, Motion, Battery status, Set point 1,2,3, Over/Under/Accept bar graph or fill bar graph, Preset Tare,
Active Ethernet connection. Additional annunciators are shown in the dot matrix display area
Display IBN illuminated: seven digit, nine segment display, green characters with black background 0.8” (20 mm) high digits
and Graphic Array used for Annunciators, mode identification and HMI (Human Machine Interface).
Sort bar/Checkweigher segments
Display Rate Selectable (1, 2, 5, 10, 20) times per second
Under/over/accept bar
or filling status bar
Motion/instability
Status Annunciators Battery status Set point Ethernet activity Custom Graphic Array
annunciators
PHYSICAL
Enclosures Stainless steel: 304 brushed stainless steel (IP69K certified) with GORE® Vent ventilation and tilt stand with provisions
for desk, wall and column mounting
Panel mount: Stainless steel panel mount IP66
Operating Temperature 14° F to 104° F / -10° C to 40° C (Compliance with legal for trade requirements)
-4° F to 140° F / -20° C to 60° C (Industrial)
10 to 90% humidity non condensing
Shipping Weight Stainless steel: 9 lb (4.1 kg)
Panel mount: 7 lb (3.2 kg)
Dimensions (L X W X H) Stainless steel: 9.6” x 5” x 8.8” (243 mm x 127 mm x 223 mm)
Panel mount: 8.7” x 3.4” x 6.9” (221 mm x 86 mm x 175 mm)
9.63
(244.6 mm) 3.55 8.69 3.49
8.25 (90.2 mm) (220.7 mm) (88.1 mm)
(209.6 mm)
(165.1 mm)
(176.3 mm)
(150.9 mm)
6.50
(222.3 mm)
6.94
5.94
8.75
8.43 5.0
(214.1 mm) (127.0 mm)
Stainless Steel
2
INPUT/OUTPUT
Remote Inputs Three TTL or voltage free logic level inputs can be received for basic key functions or application
program events
Standard Outputs Three outputs can be used for system variable setpoints or in combination with application program events
Serial Ports Two serial ports:
- Comm 1 RS232 full duplex Or - Comm 1 RS232 full duplex with handshaking
- Comm 2 RS232 full duplex - Comm 2 Not available
Manual and Autoprint function plus
programmable Input Interpreter
Supports SMA, ENQ and NCI command/response
protocols
Supports BSQ digital base
USB Host Printer
USB flash memory
Remote USB keyboard
Ethernet The Ethernet port can be configured to support five independent devices, it supports DHCP client/server and
Ethernet sockets plus it supports all the serial protocols
Fieldbus Ethernet IP and Modbus TCP
ELECTRICAL
Power Requirements Line voltage: 90-264 VAC (110-240 VAC nominal), frequency 50 or 60 Hz, 12 to 36 VDC
Power consumption: estimated at 250mA at 12VDC for one 350 ohm weigh sensor and 600mA at 12VDC for fourteen
350 ohm weigh sensors.
Excitation 10 VDC(+/-5 VDC), short circuit protected
Supports up to sixteen 350 ohm weight sensors (two scales)
4 or 6 conductors with sense leads
Detachable plug connectors
Analog Signal Input Range -1 m/V/V to 5 mV/V
Analog Signal Sensitivity 0.1 µV/V/divisions minimum
0.5 µV/V/divisions recommended
Circuitry Protection RFI, EMI and ESD protection (10 V/M minimum RFI noise immunity)
OPTIONS
Option Kits (choose one*) Analog output kit: 0-5 VDC, 0-10 VDC and 4-20 mA*
DeviceNet™ kit
Profibus® kit
Current loop kit: Current loop and RS485/RS422*
USB device kit: Provides USB interface to PC*
Wireless (Ethernet) internal kit: 802.11b/g wireless data communications kit with antenna*
Internal 120 VAC Relay module for IP69K model*
Scale Input 5 VDC excitation kit*
Scale Input 10 VDC excitation with STVS kit*
External I/O interface kit*
DC Output, 4 relays 3-60VDC at 2A Kit*
DC Input, 4 Inputs 4-30VDC kit*
AC Output, 4 relays 20-240VAC at 1A kit* (IP69K models)
AC Input, 4 Inputs 120-240VAC kit* (IP69K models)
Severe Transient Voltage Suppressor (STVS)
ZM-OPTO Provides setpoint interface
USB Watertight Gland Rubberized and sealed
Ethernet Watertight Gland Rubberized and sealed
APPROVALS
Patent US Patent 672,262
Agencies EC (Europe ) Class III and IIII (UK 3002)
NTEP (US) Class III/IIIL 10,000 d (CC# 14-039)
OIML R76 Class III and IIII (R76/2006-GB1-15.07)
Measurement Canada (AM-5955C)
Australia (NMI)* Measurement
South Africa* Canada Approved
New Zealand*
India*
MID R61 (UK/0126/0177)
CE
UL/C-UL
IP69K (case)
*pending
3
ZM400 SERIES Technical Specification
www.averyweigh-tronix.com
Avery Weigh-Tronix is an ITW company
Intel and Intel Core are trademarks of Intel Corporation in the U.S. and/or other countries
Avery Weigh-Tronix is a trademark of the Illinois Tool Works group of companies whose ultimate parent company is Illinois Tool Works Inc (“Illinois Tool
Works”). Copyright © 2016 Illinois Tool Works. All rights reserved. This publication is issued to provide outline information only and may not be regarded
as a representation relating to the products or services concerned. This publication was correct at the time of going to print, however Avery Weigh-Tronix zm400series_spec_501391.indd
reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time. V4 AWT35-501391
4
ZM500 & ZM600
SERIES INDICATORS
ZM
Flexible, high performance
ZM
indicators for advanced
weighing tasks
500SERIES
300 & 600 SERIES
Flexible weight indicator for
advanced applications
Responsive
Performance
The ZM505, ZM510, ZM605 and ZM615 are high performance, multi-function programmable
indicators which adapt to complex weighing tasks. Suitable for use with a wide range of scales,
these versatile indicators provide a fully configurable solution. Their sleek design and user-
friendly features provide an ideal platform to create application programs and solutions that are
specifically tailored to your business.
ZM505 – A nine segment numerical display is ZM510 – A dot matrix 320 x 80 display can be used to
complemented by a small dot matrix graphic create personalized messages such as user prompts,
array area to the right of the screen, enabling use images and status annunciators. (Inverted display
of status annunciators and limited graphics. colors shown). A large QWERTY keypad offers input
flexibility where adding an external keyboard would
be difficult, such as panel-mount applications.
ZM605 – Pixels across the full length and height of the ZM615 – The addition of a larger 320 x 160 display
320 x 80 display can be used to create personalized helps to improve usability. This large display provides an
Human Machine Interface (HMI) messages such as user increased area to show more user prompts and graphics.
prompts, images and status annunciators.
ZM500 & ZM600
SERIES INDICATORS
Versatile connectivity
All ZM series indicators offer multi- STANDARD CONNECTIVITY OPTIONAL CONNECTIVITY
connectivity, ensuring compatibility Scale
and communication between old Interface
www.averyweigh-tronix.com
Avery Weigh-Tronix is an ITW company
Avery Weigh-Tronix is a trademark of the Illinois Tool Works group of companies whose ultimate parent company is Illinois Tool Works Inc (“Illinois Tool
Works”). Copyright © 2017 Illinois Tool Works. All rights reserved. This publication is issued to provide outline information only and may not be regarded
as a representation relating to the products or services concerned. This publication was correct at the time of going to print, however Avery Weigh-Tronix zm500-zm600_Series_L_501654.indd
reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time. V1 AWT35-501654
505 INDICATOR
ZM
Flexible weight
indicator for advanced
applications.
Technical Specification
ETHERNET
USB
DESCRIPTION
This high performance, multi-function indicator provides the flexibility to adapt for your applications that require
an elevated level of flexibility over elementary weighing indicators.
Suitable for the office, dusty, wet or high pressure and heavy washdown environments, these indicators can
display, analyze, store, and transmit data across a range of technology methods to meet your specific installation.
SPECIFICATIONS
GENERAL
Unit of Measure Four active choices (Kilograms, Ounce, Gram, Pounds, Pound/Ounce, Ton, Tonne, Custom)
Capacity Selections 9,999,999 with decimal located zero to five places
Incremental Selections Multiples and sub-multiples of 1, 2, 5
Multi-Range/Multi-Interval Up to three independent weight ranges and divisions
Programmable Selections Zero range, motion detection, automatic zero tracking, eight point linearization
Time and Date Battery backed up time/date/year (12 hour AM/PM or 24 hour format)
Calibration Two to ten points
Analog to Digital Measurement Rate 100 Hz
Internal Resolution 67,108,864 counts per mV/V per second
Digital Filtering Harmonizer™ filtering with adaptable constant and threshold
Self Diagnostics Display, keys, inputs, outputs, serial port, scale A to D, USB port and option cards
Dynamic Weighing Minimum nominal weigh time 100 milliseconds, recommended minimum three hundred
milliseconds
Programming Language Avery Weigh-Tronix Lua, GSE Macro
ZM505 INDICATORS Technical Specification
USER INTERFACE
Keypad ZM505 has a 29 key chemical resistant keypad with metal domed tactile feedback and audio confirmation when
pressed
Operational Keys ZM505: Zero, Print, Units, Tare, Sample, Setup, ID, Scale, Target, Start, 5 Function keys (F1-F5), Select, Stop, 0-9, Alpha,
Decimal, Clear, and common symbols
Status Annunciators Center of Zero, Motion, Battery status, Set point 1,2,3, Over/Under/Accept bar graph or fill bar graph, Preset Tare,
Active Ethernet connection. Additional annunciators are shown in the dot matrix display area
Display IBN illuminated: seven digit, nine segment display, green characters with black background 0.8” (20 mm) high digits
and Graphic Array used for Annunciators, mode identification and HMI (Human Machine Interface).
Sort bar/Checkweigher segments
Display Rate Selectable (1, 2, 5, 10, 20) times per second
Under/over/accept bar
or filling status bar
Motion/instability
Status Annunciators Battery status Set point Ethernet activity Custom Graphic Array
annunciators
2
PHYSICAL
Enclosure Stainless steel desktop: 304 brushed stainless steel (IP69K certified) with GORE® Vent ventilation and tilt stand with
provisions for desk, wall and column mounting
Stainless steel panel mount: Stainless steel with easy access to interface connections
Operating Temperature 14° F to 104° F / -10° C to 40° C (Compliance with legal for trade requirements)
-4° F to 140° F / -20° C to 60° C (Industrial)
10 to 90% humidity non condensing
Shipping Weight Stainless steel desktop: 12.4 lb (5.62 kg)
Stainless steel panel mount: 11 lb (5 kg)
Dimensions (L x W x H) Stainless steel desktop: 11.88” x 5.5” x 10.75” (301.69 mm x 139.70 mm x 273.05 mm)
.53 [13.49 mm] 10.50 [266.70 mm]
Stainless steel panel mount: 11.56” x 3.61” x 9.25” (293.69 mm x 91.60 mm x 234.95 mm)
3.53 [89.69 mm]
INPUT/OUTPUT
Remote Inputs Three TTL or voltage free logic level inputs can be received for basic key functions or application program events
Standard Outputs Three outputs can be used for system variable setpoints or in combination with application program events
Serial Ports (3) Three serial ports:
- Comm 1 RS232 full duplex Or - Comm 1 RS232 Full duplex with handshaking
- Comm 2 RS232 full duplex - Comm 2 RS232 Not available
- Comm 3 RS232 full duplex - Comm 3 RS232 Full duplex with handshaking
Manual and Autoprint function
Supports SMA, ENQ and NCI command
response protocols and broadcast
Supports BSQ digital bench base
USB Host (2) Two USB Host ports for:
›› Printer
›› USB flash memory
›› Remote USB keyboard
Ethernet The Ethernet port can be configured to support ten independent devices. It supports DHCP, UDP Sockets, TCP/IP
(client or server), embedded web server, email, SMA, NCI, FTP, ENQ and Broadcast.
Fieldbus Ethernet/IP™ and Modbus-TCP
ELECTRICAL
Power Requirements Line voltage: 90-264 VAC (110-240 VAC nominal), frequency 50 or 60 Hz, 12 to 36 VDC
Power consumption: estimated at 300mA at 12VDC for one 350 ohm weight sensor and 650mA at 12VDC for fourteen
350 ohm weight sensors
Excitation 10 VDC (+/-5 VDC), short circuit protected
Supports up to twenty four 350 ohm weight sensors (four scales)
4 or 6 conductors with sense leads
Detachable plug connectors
Analog Signal Input Range -1 m/V/V to 5 mV/V
Analog Signal Sensitivity 0.1 µV/V/divisions minimum
0.5 µV/V/divisions recommended
Circuitry Protection RFI, EMI and ESD protection (10 V/m minimum RFI noise immunity)
3
ZM505 INDICATORS Technical Specification
OPTIONS
Option Kits (maximum Analog output kit: 0-5 VDC, 0-10 VDC and 4-20 mA
four internal options) Current loop kit: Current loop and RS232/RS422
USB device kit: Provides USB interface to PC (virtual comm Port)
Device Net™
Profibus©
Wireless (Ethernet) internal kit: 802.11b/g wireless data communications kit with antenna
Internal 120 VAC Relay module for IP69K model
Scale Input 5 VDC excitation
Scale Input 10 VDC excitation with STVS kit
External I/O interface kit
DC Output, 4 relays 3-60VDC at 2A Kit
DC Input, 4 Inputs 4-30VDC kit
AC Output, 4 relays 20-240VAC at 1A kit (IP69K models)
AC Input, 4 Inputs 120-240VAC kit (IP69K models)
Severe Transient Voltage Suppressor (STVS)
ZM-OPTO Provides 3 inputs and/or 3 outputs, external G4 interface modules
USB Watertight Gland Rubberized and sealed
Ethernet Watertight Gland Rubberized and sealed
APPROVALS
Patent US Patent 672,262
Agencies NTEP (US) Class III/IIIL 10,000d (CC# 14-039)
Measurement Canada class III/III HD (AM-5955C) Measurement
UL/cUL
IP69K Canada Approved
www.averyweigh-tronix.com
Avery Weigh-Tronix is an ITW company
Avery Weigh-Tronix is a trademark of the Illinois Tool Works group of companies whose ultimate parent company is Illinois Tool Works Inc (“Illinois Tool
Works”). Copyright © 2017 Illinois Tool Works. All rights reserved. This publication is issued to provide outline information only and may not be regarded
as a representation relating to the products or services concerned. This publication was correct at the time of going to print, however Avery Weigh-Tronix zm505_spec_501685.indd
reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time. V1 AWT35-501685
4
510 INDICATOR
ZM
Flexible weight
indicator for advanced
applications.
Technical Specification
ETHERNET
USB
DESCRIPTION
This high performance, multi-function indicator provides the flexibility to adapt for your applications. A dot
matrix 320 x 80 display can be used to create personalized messages such as user prompts, images and status
annuniciators. A large QWERTY keypad offers input flexibility where adding an external keyboard would be
difficult, such as panel-mount applications.
Suitable for the office, dusty, wet or high pressure and heavy washdown environments, these indicators can
display, analyze, store, and transmit data across a range of technology methods to meet your specific installation.
SPECIFICATIONS
GENERAL
Unit of Measure Four active choices (Kilograms, Ounce, Gram, Pounds, Pound/Ounce, Ton, Tonne, Custom)
Capacity Selections 9,999,999 with decimal located zero to five places
Incremental Selections Multiples and sub-multiples of 1, 2, 5
Multi-Range/Multi-Interval Up to three independent weight ranges and divisions
Programmable Selections Zero range, motion detection, automatic zero tracking, eight point linearization
Time and Date Battery backed up time/date/year (12 hour AM/PM or 24 hour format)
Calibration Two to ten points
Analog to Digital Measurement Rate 100 Hz
Internal Resolution 67,108,864 counts per mV/V per second
Digital Filtering Harmonizer™ filtering with adaptable constant and threshold
Self Diagnostics Display, keys, inputs, outputs, serial port, scale A to D, USB port and option cards
Dynamic Weighing Minimum nominal weigh time 100 milliseconds, recommended minimum three hundred
milliseconds
Programming Language Avery Weigh-Tronix Lua, WT Basic, GSE Macro
1
ZM510 INDICATORS Technical Specification
USER INTERFACE
Keypad ZM510 has a 48 key chemical resistant keypad with metal domed tactile feedback and audio confirmation when
pressed
Operational Keys Zero, Print, Units, Tare, Select, Setup, Scale, Start, Stop, 0-9, Individual Alpha, CAPS, Number Lock, Enter, Five
Function Keys (F1-F5), Space Bar
Status Annunciators Center of Zero, Motion, Battery status, Preset Tare, Active Ethernet Connection, Unit of Measure and more are
shown on the dot matrix display
Display Improved Super Twisted Nematic (ISTN) Graphic Display: the green illuminated with black background
320 x 80 pixel display provides wide viewing angles and high brightness. Pixels can be organized on the display
to create personalized Human Machine Interface messages and images. A mode selection allows the image
to be displayed in reverse image for applications that would benefit from dark characters with a clear/light
contrasted background.
Display Rate Selectable (1, 2, 5, 10, 20) times per second
2
PHYSICAL
Enclosure Stainless steel desktop: 304 brushed stainless steel (IP69K certified) with GORE® Vent ventilation and tilt stand with
provisions for desk, wall and column mounting
Stainless steel panel mount: Stainless steel with easy access to interface connections
Operating Temperature 14° F to 104° F / -10° C to 40° C (Compliance with legal for trade requirements)
-4° F to 140° F / -20° C to 60° C (Industrial)
10 to 90% humidity non condensing
Shipping Weight Stainless steel desktop: 12.4 lb (5.62 kg)
Stainless steel panel mount: 11 lb (5 kg)
Dimensions (L x W x H) Stainless steel desktop: 11.88” x 5.5” x 10.75” (301.69 mm x 139.70 mm x 273.05 mm) .53 [13.49 mm] 10.50 [266.70 mm]
Stainless steel panel mount: 11.56” x 3.61” x 9.25” (293.69 mm x 91.60 mm x 234.95 mm)
8 7 6 5 4 3 2 1
DRAWING ISSUE RECORD
ZONE ISSUE DESCRIPTION BY DATE APPR
08-Oct-13 3.53 [89.69 mm]
D D
10.50 [266.70 mm]
PN AWT15-501545
Avery Weigh-Tronix, LLC
THIRD ANGLE PROJECTION UNLESS OTHERWISE SPECIFED, ALL DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE: REMOVE BURRS & SHARP EDGES
1000 Armstrong Drive, Fairmont, MN 56031, USA
A 2 PLACE DECIMALS .03 APPROVALS DATE A
3 PLACE DECIMALS .010 DRAWN Greg Abel 08-Oct-13
ANGLES 1 DEG.
HOLE DIA TOLERANCES THREADS CHECK
©2016 ITW group of companies. All rights
reserved. No part of this publication may be
reproduced, stored in an electronic retrieval system,
.000-.250 +.003/-.002
.251-.500 +.005/-.003
OVER .500 +.010/-.005
INT. EXT. MECH ENG
CLASS CLASS
2B 2A ELEC ENG
ENCL ASSY, ZM510-SD4 SS US
or transmitted in any form or by any means,
electronic, mechanical, photocopying, recording or
otherwise without the prior written consent of the MATERIAL FINISH
copyright owner, or as permitted by law or under
licence. Full acknowledgment of the source must
be given. Avery Weigh-Tronix is a registered trade
AWT15-501545
SIZE DWG. NO. ISSUE
D
mark of the ITW group of companies. This
publication was correct at the time of going to print
however, Avery Weigh-Tronix reserves the right to
alter without notice the specification, design, price
or conditions of supply of any product or service at SCALE SHEET
any time. 1 OF 3
INPUT/OUTPUT
8 7 6 5 4 3 2 1
Remote Inputs Three TTL or voltage free logic level inputs can be received for basic key functions or application program events
Standard Outputs Three outputs can be used for system variable setpoints or in combination with application program events
Serial Ports (3) Three serial ports:
- Comm 1 RS232 full duplex Or - Comm 1 RS232 Full duplex with handshaking
- Comm 2 RS232 full duplex - Comm 2 RS232 Not available
- Comm 3 RS232 full duplex - Comm 3 RS232 Full duplex with handshaking
Manual and Autoprint function
Supports SMA, ENQ and NCI command
response protocols and broadcast
Supports BSQ digital bench base
USB Host (2) Two USB Host ports for:
›› Printer
›› USB flash memory
›› Remote USB keyboard
Ethernet The Ethernet port can be configured to support ten independent devices. It supports DHCP, UDP Sockets, TCP/IP
(client or server), embedded web server, email, SMA, NCI, FTP, ENQ and Broadcast.
Fieldbus Ethernet/IP™ and Modbus-TCP
ELECTRICAL
Power Requirements Line voltage: 90-264 VAC (110-240 VAC nominal), frequency 50 or 60 Hz, 12 to 36 VDC
Power consumption: estimated at 300mA at 12VDC for one 350 ohm weight sensor and 650mA at 12VDC for fourteen
350 ohm weight sensors
Excitation 10 VDC (+/-5 VDC), short circuit protected
Supports up to twenty four 350 ohm weight sensors (four scales)
4 or 6 conductors with sense leads
Detachable plug connectors
Analog Signal Input Range -1 m/V/V to 5 mV/V
Analog Signal Sensitivity 0.1 µV/V/divisions minimum
0.5 µV/V/divisions recommended
Circuitry Protection RFI, EMI and ESD protection (10 V/m minimum RFI noise immunity)
3
ZM510 INDICATORS Technical Specification
OPTIONS
Option Kits (maximum Analog output kit: 0-5 VDC, 0-10 VDC and 4-20 mA
four internal options) Current loop kit: Current loop and RS232/RS422
USB device kit: Provides USB interface to PC (virtual comm Port)
Device Net™
Profibus©
Wireless (Ethernet) internal kit: 802.11b/g wireless data communications kit with antenna
Internal 120 VAC Relay module for IP69K model
Scale Input 5 VDC excitation
Scale Input 10 VDC excitation with STVS kit
External I/O interface kit
DC Output, 4 relays 3-60VDC at 2A Kit
DC Input, 4 Inputs 4-30VDC kit
AC Output, 4 relays 20-240VAC at 1A kit (IP69K models)
AC Input, 4 Inputs 120-240VAC kit (IP69K models)
Severe Transient Voltage Suppressor (STVS)
ZM-OPTO Provides 3 inputs and/or 3 outputs, external G4 interface modules
USB Watertight Gland Rubberized and sealed
Ethernet Watertight Gland Rubberized and sealed
APPROVALS
Patent US Patent 672,262
Agencies NTEP (US) Class III/IIIL 10,000d (CC# 14-039)
Measurement Canada class III/III HD (AM-5955C) Measurement
UL/cUL
IP69K Canada Approved
www.averyweigh-tronix.com
Avery Weigh-Tronix is an ITW company
Avery Weigh-Tronix is a trademark of the Illinois Tool Works group of companies whose ultimate parent company is Illinois Tool Works Inc (“Illinois Tool
Works”). Copyright © 2017 Illinois Tool Works. All rights reserved. This publication is issued to provide outline information only and may not be regarded
as a representation relating to the products or services concerned. This publication was correct at the time of going to print, however Avery Weigh-Tronix zm510_spec_501655.indd
reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time. V1 AWT35-501655
4
605 INDICATOR
ZM
Flexible weight
indicator for advanced
applications.
Technical Specification
ETHERNET
USB
IP69K Stainless Steel Enclosure
Graphic Display
SERIAL
DESCRIPTION
This high performance, multi-function indicator provides the flexibility to adapt for your applications. Pixels across the
full length and height of the 320 by 80 display can be used to create personalized Human Machine Interface messages
such as user prompts, images and status annuniciators.
Suitable for the office, dusty, wet or high pressure and heavy washdown environments, these indicators can display,
analyze, store, and transmit data across a range of technology methods to meet your specific installation.
SPECIFICATIONS
GENERAL
Unit of Measure Four active choices (Kilograms, Ounce, Gram, Pounds, Pound/Ounce, Ton, Tonne, Custom)
Capacity Selections 9,999,999 with decimal located zero to five places
Incremental Selections Multiples and sub-multiples of 1, 2, 5
Multi-Range/Multi-Interval Up to three independent weight ranges and divisions
Programmable Selections Zero range, motion detection, automatic zero tracking, eight point linearization
Time and Date Battery backed up time/date/year (12 hour AM/PM or 24 hour format)
Calibration Two to ten points
Analog to Digital Measurement Rate 100 Hz
Internal Resolution 67,108,864 counts per mV/V per second
Digital Filtering Harmonizer™ filtering with adaptable constant and threshold
Self Diagnostics Display, keys, inputs, outputs, serial port, scale A to D, USB port and option cards
Dynamic Weighing Minimum nominal weigh time 100 milliseconds, recommended minimum three hundred
milliseconds
Programming Language Avery Weigh-Tronix Lua, WT Basic, GSE Macro
ZM605 INDICATORS Technical Specification
USER INTERFACE
Keypad ZM605 has a 29 key chemical resistant keypad with metal domed tactile feedback and audio confirmation when
pressed
Operational Keys Zero, Print, Units, Tare, Sample, Setup, ID, Scale, Target, 5 Function Keys (F1-F5), Select, Start, Stop, 0-9, Alpha,
Decimal, Clear and Common Symbols
Status Annunciators Center of Zero, Motion, Battery status, Preset Tare, Active Ethernet Connection, Unit of Measure and more are
shown on the dot matrix display
Display Improved Super Twisted Nematic (ISTN) Graphic Display: the green illuminated with black background
320 x 80 pixel display provides wide viewing angles and high brightness. Pixels can be organized on the display
to create personalized Human Machine Interface messages and images. A mode selection allows the image
to be displayed in reverse image for applications that would benefit from dark characters with a clear/light
contrasted background.
Display Rate Selectable (1, 2, 5, 10, 20) times per second
2
PHYSICAL
Enclosure Stainless steel desktop: 304 brushed stainless steel (IP69K certified) with GORE® Vent ventilation and tilt stand with
provisions for desk, wall and column mounting
Stainless steel panel mount: Stainless steel with easy access to interface connections
Operating Temperature 14° F to 104° F / -10° C to 40° C (Compliance with legal for trade requirements)
-4° F to 140° F / -20° C to 60° C (Industrial)
10 to 90% humidity non condensing
Shipping Weight Stainless steel desktop: 12.4 lb (5.62 kg)
Stainless steel panel mount: 11 lb (5 kg)
Dimensions (L x W x H) Stainless steel desktop: 11.88” x 5.5” x 10.75” (301.69 mm x 139.70 mm x 273.05 mm)
.53 [13.49 mm] 10.50 [266.70 mm]
Stainless steel panel mount: 11.56” x 3.6” x 9.25” (293.69 mm x 91.60 mm x 234.95 mm)
INPUT/OUTPUT
Remote Inputs Three TTL or voltage free logic level inputs can be received for basic key functions or application program events
Standard Outputs Three outputs can be used for system variable setpoints or in combination with application program events
Serial Ports (3) Three serial ports:
- Comm 1 RS232 full duplex Or - Comm 1 RS232 Full duplex with handshaking
- Comm 2 RS232 full duplex - Comm 2 RS232 Not available
- Comm 3 RS232 full duplex - Comm 3 RS232 Full duplex with handshaking
Manual and Autoprint function
Supports SMA, ENQ and NCI command
response protocols and broadcast
Supports BSQ digital bench base
USB Host (2) Two USB Host ports for:
›› Printer
›› USB flash memory
›› Remote USB keyboard
Ethernet The Ethernet port can be configured to support ten independent devices. It supports DHCP, UDP Sockets, TCP/IP
(client or server), embedded web server, email, SMA, NCI, FTP, ENQ and Broadcast.
Fieldbus Ethernet/IP™ and Modbus-TCP
ELECTRICAL
Power Requirements Line voltage: 90-264 VAC (110-240 VAC nominal), frequency 50 or 60 Hz, 12 to 36 VDC
Power consumption: estimated at 300mA at 12VDC for one 350 ohm weight sensor and 650mA at 12VDC for fourteen
350 ohm weight sensors
Excitation 10 VDC (+/-5 VDC), short circuit protected
Supports up to twenty four 350 ohm weight sensors (four scales)
4 or 6 conductors with sense leads
Detachable plug connectors
Analog Signal Input Range -1 m/V/V to 5 mV/V
Analog Signal Sensitivity 0.1 µV/V/divisions minimum
0.5 µV/V/divisions recommended
Circuitry Protection RFI, EMI and ESD protection (10 V/m minimum RFI noise immunity)
3
ZM605 INDICATORS Technical Specification
OPTIONS
Option Kits (maximum Analog output kit: 0-5 VDC, 0-10 VDC and 4-20 mA
four internal options) Current loop kit: Current loop and RS232/RS422
USB device kit: Provides USB interface to PC (virtual comm Port)
Device Net™
Profibus©
Wireless (Ethernet) internal kit: 802.11b/g wireless data communications kit with antenna
Internal 120 VAC Relay module for IP69K model
Scale Input 5 VDC excitation
Scale Input 10 VDC excitation with STVS kit
External I/O interface kit
DC Output, 4 relays 3-60VDC at 2A Kit
DC Input, 4 Inputs 4-30VDC kit
AC Output, 4 relays 20-240VAC at 1A kit (IP69K models)
AC Input, 4 Inputs 120-240VAC kit (IP69K models)
Severe Transient Voltage Suppressor (STVS)
ZM-OPTO Provides 3 inputs and/or 3 outputs, external G4 interface modules
USB Watertight Gland Rubberized and sealed
Ethernet Watertight Gland Rubberized and sealed
APPROVALS
Patent US Patent 672,262
Agencies NTEP (US) Class III/IIIL 10,000d (CC# 14-039)
Measurement Canada class III/III HD (AM-5955C)
UL/cUL
IP69K
Measurement
Canada Approved
www.averyweigh-tronix.com
Avery Weigh-Tronix is an ITW company
Avery Weigh-Tronix is a trademark of the Illinois Tool Works group of companies whose ultimate parent company is Illinois Tool Works Inc (“Illinois Tool
Works”). Copyright © 2017 Illinois Tool Works. All rights reserved. This publication is issued to provide outline information only and may not be regarded
as a representation relating to the products or services concerned. This publication was correct at the time of going to print, however Avery Weigh-Tronix zm605_spec_501680.indd
reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time. V2 AWT35-501680
4
615 INDICATOR
ZM
Flexible weight
indicator for advanced
applications.
Technical Specification
ETHERNET
USB
SERIAL
DESCRIPTION
This high performance, multi-function indicator provides the flexibility to adapt to the most demanding applications. The
addition of a larger 320 x 160 display helps to improve usability. This large display provides an increased area to show more
user prompts and graphics.
Suitable for the office, dusty, wet or high pressure and heavy washdown environments, these indicators can display, analyze,
store, and transmit data across a range of technology methods to meet your specific installation.
SPECIFICATIONS
GENERAL
Unit of Measure Four active choices (Kilograms, Ounce, Gram, Pounds, Pound/Ounce, Ton, Tonne, Custom)
Capacity Selections 9,999,999 with decimal located zero to five places
Incremental Selections Multiples and sub-multiples of 1, 2, 5
Multi-Range/Multi-Interval Up to three independent weight ranges and divisions
Programmable Selections Zero range, motion detection, automatic zero tracking, eight point linearization
Time and Date Battery backed up time/date/year (12 hour AM/PM or 24 hour format)
Calibration Two to ten points
Analog to Digital Measurement Rate 100 Hz
Internal Resolution 67,108,864 counts per mV/V per second
Digital Filtering Harmonizer™ filtering with adaptable constant and threshold
Self Diagnostics Display, keys, inputs, outputs, serial port, scale A to D, USB port and option cards
Dynamic Weighing Minimum nominal weigh time 100 milliseconds, recommended minimum three hundred
milliseconds
Programming Language Avery Weigh-Tronix Lua, GSE Macro
ZM615 INDICATORS Technical Specification
USER INTERFACE
Keypad ZM615 has a 29 key chemical resistant keypad with metal domed tactile feedback and audio confirmation when
pressed
Operational Keys Zero, Print, Units, Tare, Sample, Setup, ID, Scale, Target, 5 Function Keys (F1-F5), Select, Start, Stop, 0-9, Alpha,
Decimal, Clear and Common Symbols
Status Annunciators Center of Zero, Motion, Battery status, Preset Tare, Active Ethernet Connection, Unit of Measure and more are
shown on the dot matrix display
Display Improved Super Twisted Nematic (ISTN) Graphic Display: the green illuminated with black background
320 x 160 pixel display provides wide viewing angles and high brightness. Pixels can be organized on the
display to create personalized Human Machine Interface messages and images. A mode selection allows the
image to be displayed in reverse image for applications that would benefit from dark characters with a clear/
light contrasted background.
Display Rate Selectable (1, 2, 5, 10, 20) times per second
2
PHYSICAL
Enclosure Stainless steel desktop: 304 brushed stainless steel (IP69K certified) with GORE® Vent ventilation and tilt stand with
provisions for desk, wall and column mounting
Stainless steel panel mount: Stainless steel with easy access to interface connections
Operating Temperature 14° F to 104° F / -10° C to 40° C (Compliance with legal for trade requirements)
-4° F to 140° F / -20° C to 60° C (Industrial)
10 to 90% humidity non condensing
Shipping Weight Stainless steel desktop: 12.4 lb (5.62 kg)
Stainless steel panel mount: 11 lb (5 kg)
Dimensions (L x W x H) Stainless steel desktop: 11.88” x 5.5” x 10.75” (301.69 mm x 139.70 mm x 273.05 mm)
.53 [13.49 mm] 10.50 [266.70 mm]
Stainless steel panel mount: 11.56” x 3.6” x 9.25” (293.69 mm x 91.60 mm x 234.95 mm)
INPUT/OUTPUT
Remote Inputs Three TTL or voltage free logic level inputs can be received for basic key functions or application program events
Standard Outputs Three outputs can be used for system variable setpoints or in combination with application program events
Serial Ports (3) Three serial ports:
- Comm 1 RS232 full duplex Or - Comm 1 RS232 Full duplex with handshaking
- Comm 2 RS232 full duplex - Comm 2 RS232 Not available
- Comm 3 RS232 full duplex - Comm 3 RS232 Full duplex with handshaking
Manual and Autoprint function
Supports SMA, ENQ and NCI command
response protocols and broadcast
Supports BSQ digital bench base
USB Host (2) Two USB Host ports for:
›› Printer
›› USB flash memory
›› Remote USB keyboard
Ethernet The Ethernet port can be configured to support ten independent devices. It supports DHCP, UDP Sockets, TCP/IP
(client or server), embedded web server, email, SMA, NCI, FTP, ENQ and Broadcast.
Fieldbus Ethernet/IP™ and Modbus-TCP
ELECTRICAL
Power Requirements Line voltage: 90-264 VAC (110-240 VAC nominal), frequency 50 or 60 Hz, 12 to 36 VDC
Power consumption: estimated at 300mA at 12VDC for one 350 ohm weight sensor and 650mA at 12VDC for fourteen
350 ohm weight sensors
Excitation 10 VDC (+/-5 VDC), short circuit protected
Supports up to thirty two 350 ohm weight sensors (four scales)
4 or 6 conductors with sense leads
Detachable plug connectors
Analog Signal Input Range -1 m/V/V to 5 mV/V
Analog Signal Sensitivity 0.1 µV/V/divisions minimum
0.5 µV/V/divisions recommended
Circuitry Protection RFI, EMI and ESD protection (10 V/m minimum RFI noise immunity)
3
ZM615 INDICATORS Technical Specification
OPTIONS
Option Kits (maximum Analog output kit: 0-5 VDC, 0-10 VDC and 4-20 mA
four internal options) Current loop kit: Current loop and RS232/RS422
USB device kit: Provides USB interface to PC (virtual comm Port)
Device Net™
Profibus©
Wireless (Ethernet) internal kit: 802.11b/g wireless data communications kit with antenna
Internal 120 VAC Relay module for IP69K model
Scale Input 5 VDC excitation
Scale Input 10 VDC excitation with STVS kit
External I/O interface kit
DC Output, 4 relays 3-60VDC at 2A Kit
DC Input, 4 Inputs 4-30VDC kit
AC Output, 4 relays 20-240VAC at 1A kit (IP69K models)
AC Input, 4 Inputs 120-240VAC kit (IP69K models)
Severe Transient Voltage Suppressor (STVS)
ZM-OPTO Provides 3 inputs and/or 3 outputs, external G4 interface modules
USB Watertight Gland Rubberized and sealed
Ethernet Watertight Gland Rubberized and sealed
APPROVALS
Patent US Patent 672,262
Agencies NTEP (US) Class III/IIIL 10,000d (CC# 14-039)
Measurement Canada class III/III HD (AM-5955C)
UL/cUL
IP69K
Measurement
Canada Approved
www.averyweigh-tronix.com
Avery Weigh-Tronix is an ITW company
Avery Weigh-Tronix is a trademark of the Illinois Tool Works group of companies whose ultimate parent company is Illinois Tool Works Inc (“Illinois Tool
Works”). Copyright © 2017 Illinois Tool Works. All rights reserved. This publication is issued to provide outline information only and may not be regarded
as a representation relating to the products or services concerned. This publication was correct at the time of going to print, however Avery Weigh-Tronix zm615_spec_501686.indd
reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time. V1 AWT35-501686
4
350 I.S./355 I.S.
Intrinsically Safe
Weight-Based Indicators
Intrinsically Safe Indicators
The Model 350 I.S. and Model 355 I.S. are designed to be intrinsically safe in hazardous
environments and meet standards in metrology and electrical safety with precision weighing.
Smart features such as quick calibration, fast update rate, and process control configuration
offer value-added flexibility. They are designed for use in multi-level applications and provide
operator access for monitoring and controlling actions based on weight values.
* To ensure safe use, the Model 350 I.S. and Model 355 I.S. should only be powered by the approved AC Power Module or approved Battery Power Module.
The Model 350 I.S. Indicator is ideal for applications Data communications and set point interfacing is
where only the weighing event occurs. Where a performed in the safe area. The Model 350 I.S., and
keypad is required, the Model 355 I.S. Indicator is Model 355 I.S. Indicators communicate via the optional
the perfect choice. fiber optic interface.
We offer a choice of display types to suit your To complement our Intrinsically Safe instruments,we
application. When an indicator is located outside offer a complete line of Bench Platforms and Floor
or in direct sunlight, the LCD (Liquid Crystal Display) Scales.
Backlit Display maintains excellent readability.
Installation locations with low or no light will benefit
with indicator models that have the bright, crisp LED
(Light Emitting Diode) Display. APPLICATIONS
These indicators can be powered by a battery pack • Fertilizer Processing and Loading
in the hazardous area for applications where access • Ink Manufacturing and Blending
to main power is an issue. The battery module is • Gaseous or Liquid Fueling Stations
mounted on the indicator swivel bracket and the • Chemical Development and Mixing
indicator has an annunciator to warn when the battery • Portable Oil Drum Weighing
requires a recharge. Battery recharging must occur
• Paint Processing and Filling
in a safe area. There is also a sleep mode feature
for extended battery life. For applications where the
indicators are providing data or controlling actions, a
continuous power source is an available solution.
Hazardous Area Communication
FEATURES
Model 350 I.S./355 I.S. (Hazardous Area Indicator)
• Display Choices: LCD, LCD Backlit, or LED
• Up to 200 hours continuous use with battery module
• Two (2) communication ports
• Stainless Steel IP6X/NEMA 4X enclosure
• Power up to four (4) 350 Ω load cells
Model 355 I.S. Indicator
• Update Flash firmware enhancements with LCD Display,
with GSE Reflash utility and Battery Module
• AC Power Module can be located in
Model 350 I.S. Indicator
safe or hazardous area
with LED Display
• START, STOP, TARGET keys for Setpoint
Control functions (355 IS)
• Two (2) Intrinsically Safe inputs for remote
key functions
To complement our intrinsically safe indicator, a Safe Area Hub is available. An optional Fiber
Optic Communication Kit is installed in the Intrinsically Safe Indicator and the Safe Area Hub, a
standard Model ZM303 Indicator. Via this fiber optic connection, the Safe Area Hub will echo
the intrinsically safe indicator’s display weight/data, control setpoint contacts, analog
output levels, and communications (serial, USB and Ethernet) to other safe area devices. The
Safe Area Hub can be configured to remotely control the intrinsically safe instrument or function
only as a remote display.
OPTIONS
ZM303 (Safe Area Hub)
• Analog output module
• Wireless Ethernet
• ZM - OPTO (set point relays)
Specifications: Model 350 I.S./355 I.S. Indicators
Power Options
PERFORMANCE
Full Scale (F.S.) Selectable to 999,999
AC Power Supply
Resolution 20 Bit A/D Converter, 100,000d Displayed
• Stainless steel enclosure and 1,000,000d Internal
• Universal mounting bracket A/D Conversion 60 Hz
• 13 ft (4 m) power cord Zero Track Aperture Off to 10.0d
www.averyweigh-tronix.com
Avery Weigh-Tronix is an ITW company
Avery Weigh-Tronix is a trademark of the Illinois Tool Works group of companies whose ultimate parent company is Illinois Tool Works Inc (“Illinois Tool
Works”). Copyright © 2016 Illinois Tool Works. All rights reserved. This publication is issued to provide outline information only and may not be regarded
as a representation relating to the products or services concerned. This publication was correct at the time of going to print, however Avery Weigh-Tronix 2/2016 GSE350IS_L_500348.indd
reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time. AWT35-500348
T E C H N I C A L S P E C I F I C AT I O N
350 I.S.
SPECIFICATIONS
ELECTRICAL KEYPAD
Power Requirement: Input (J14): 5.1 VDC – 12 VDC Model 350 IS: Durable elastomeric rubber,
Excitation Voltage: 5 VDC 5 key (Zero, Print, Units, Tare, Select)
Excitation Current: 57 mA max (5V EXC) Model 355 IS: Durable elastomeric rubber, 22 key
(4) 350 Ohm weight sensors (On/Target, Off, Zero, Tare, Print, Select, STOP, START,
Select, Units, Sample/Enter, Clear and Full Numeric)
Signal Input Sensitivity: 0.1 mV/V min – 10mV/V max
Signal Connection: 4 or 6 lead with sense leads DISPLAY
LED: 6 digit weight display, 0.8” (22mm) height
PERFORMANCE
12 LED annunciators for operational status
Full Scale (F.S.): Selectable 0 to 999,990
LCD: 6 digit weight display, 1” (25mm) height
A/D Conversion : 60 Hz 12 LCD annunciators for operational status
Resolution: 20 bit A/D converter, 100,000d displayed, Includes LCD checkweigh / sort bar
1,000,000 internal with or without backlight
Zero Track Aperture: Off – 10d
COMMUNICATIONS
Zero Range: Selectable, 0.01-100% Full Scale
Comm 1: RS232 with Hardware Handshaking (CTS/RTS)
Non–Linearity: 0.005% Full Scale, Load Cell dependent
Comm 2: TTL Port for optional Fiber Optic Module
Operating Temperature: -10° C to +40° C
Units of Measure: lb, kg, grams, lb-oz, oz PROCESS CONTROL
Remote Input: 2 momentary contact programmable
to perform TARE, PRINT, ZERO
SPECIFICATIONS CONTINUE ON NEXT PAGE
Model 350 I.S. and Model 355 I.S. Intrinsically Safe Indicators
T E C H N I C A L S P E C I F I C AT I O N
ENCLOSURE OPTIONS
Stainless Steel: NEMA 4X, IP6X
Mounting: 2 Swivel brackets are available for battery or SAFE AREA OPTIONS
AC operation Battery Charger: Charges completely discharged
Shipping Weight: 7 lb. (indicator only) battery option in approximately 3.5 hours. Universal
AC input 85-265 VAC, 50/60 Hz
APPROVALS
HAZARDOUS AREA OPTIONS
Factory Mutual
Battery: Stainless steel enclosure, mounts to indicator
NTEP COC 98-092
swivel bracket. 200 hours continuous use with LCD
Canadian WM AM 5257 display and one load cell. 100 hours continuous use
Canadian WM AM 5518 with LED display and one load cell.
AC/DC Power Supply: Stainless steel enclosure. Powers
up to 2 indicators (2 indicators can only be powered
in Groups C-G hazardous area) Wall mount. Universal
AC input 90-250VAC, 50/60 Hz.
Power Extension Cable: Allows the AC/DC power
supply to be mounted away from the indicator 25
feet or 50 feet lengths available.
Model 350 I.S. and Model 355 I.S. Intrinsically Safe Indicators
T E C H N I C A L S P E C I F I C AT I O N
DIMENSIONS
350 I.S.
350 I.S.
with battery option
355 I.S.
355 I.S.
with battery option
www.averyweigh-tronix.com
Avery Weigh-Tronix is an ITW company
Avery Weigh-Tronix is a trademark of the Illinois Tool Works group of companies whose ultimate parent company is Illinois Tool Works Inc (“Illinois Tool
Works”). Copyright © 2016 Illinois Tool Works. All rights reserved. This publication is issued to provide outline information only and may not be regarded
as a representation relating to the products or services concerned. This publication was correct at the time of going to print, however Avery Weigh-Tronix 2/2016 350IS_spec_500348.indd
reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time. AWT35-500374
560, 660 Series Indicators
Weight-Based
Indicators and Controllers
Flexible, Legal-For-Trade Weighing Solutions
To stay competitive, the industries of today are fast-paced and lean. They require equipment
that provides intuitive operation for personnel at all skill levels. These programmable instrument
models deliver exactly that with three levels of sophistication. The unique combination of
automation technology supported by a worldwide network of factory trained Distributors make it
simple for you to tailor one of these indicators to a wide range of applications.
Increase your process efficiency by improving accuracy. Our line of programmable instrumen-
tation has helped people in nearly every industry improve weighing accuracy and ultimately
their bottom line. GSE is dedicated to providing the most flexible, highest quality weight-based
products for demanding applications, anywhere in the world.
The complete line of 560, and 660 Series Indicators, with progressive levels of performance, allow you to select a
model that best fits your needs. Whether you’re on the farm or in a processing plant, our instruments are built and
tested to withstand the most severe environments while delivering precision weighing accuracy.
Versatile Connectivity
Integrate weight and process data into your network. Versatile communication protocols allow devices to talk
via point-to-point communications or standard industrial fieldbus networks which in turn provides the ability to
exchange plant floor data in a variety of formats. This is of particular value to facilities and integrators that
require communication options for a v ariety of machines and applications. Because our indicators have common
communication modules and programming utilities, integration time is quicker and maintenance costs are reduced.
or an Ethernet Module...
• When communicating across an Intranet or Internet connection, the Custom Transmit Tables™ and Input Interpreter
Tables™ provide the ultimate flexibility in system integration. These features permit the user to configure the
weighing instrument to communicate in their network.
• The IP setup tool quickly establishes a static IP address or DHCP server compatible.
• To expedite setup, a dynamic on-board web server makes network configuration fast and simple.
• The Ethernet Module provides instant access to view the scale weight and process data remotely.
• Communicate via Telnet server or client, FTP client and Modbus TCP/IP protocols.
Features Options
Data Management Multi-Scale Module: Add additional scale input signals.
Use Rabbet™ Software or User C to define database structure.
Analog Output Module: 0-10VDC, 0-20mA or 4-20mA, absolute
The database is then managed using the 18 available functions
zero and full scale values are programmable, 16 bit resolution.
that include; Create, Delete, Recall, Sort, Upload and Download
to name a few. The independent databases are specifically Database Modules: Two modules provide 256KB and 2MB of
useful for applications that recall information from one database additional database memory for data management.
and require the transaction or process data to be recorded in a
separate database file. RS485 Module: Multi-drop up to 251 devices in half or full duplex to
a distance of 4000 feet (1200m), replaces RS232 Port 1.
Variable Data Registers I/O Relay Modules: Optically isolated, 20-240 VAC & 3-60 VDC
No application is identical. For that reason, user defined Variable Input and Output Modules, 1-3A rating.
Data Registers (VDR) can be setup as alpha-numeric strings, floats,
integers and unsigned integers with variable character length. 20mA Current Loop: TX active or passive, RX-Passive, 9600bps,
Label names for VDR’s are infinite so you are only limited to your 12VDC, 1000 feet (300m), replaces RS232 Port 1.
application requirements and your imagination when configuring
SCR Module: Vibratory feeder control, 1.75A RMS maximum load,
the VDR’s.
20-280VAC, zero cross detection.
Flash Memory Updates User C Development Kit: Includes all software and hardware
As new features are added to the firmware, your instrument can required to write applications in C.
be updated with the latest enhancements using GSE Reflash
Software. Application files can also be transmitted over any Rabbet™ Software: A Windows® GUI designed to expedite
communication c onnection including Ethernet for installations with development; configure the instruments and program in the GSE Macro
multiple instruments in various locations. Language. This intuitive software guides you through the general
instrument setup parameters and more advanced program development.
Turn-Key Applications
Wedge Plus™ Software: Real time data collection/data logging in
Common weighing applications such as Batching, the background operation; powerful ActiveX controls for Windows®
Checkweighing, Discharge, Filling and Truck In/Out are resident
in the instrument’s memory. These full featured applications can RF Comm Modules: Wireless connection to single or multiple
be easily modified to better accommodate your needs or a custom devices.
program can be written by factory trained Distributors.
DeviceNet™, Profibus®, Ethernet Modules: Provide(s) fieldbus
Operator Interface (OI) communications.
Intuitive equipment operation is important for improving production Dura-Shield & Splash Guards: Keep the instrument clean in dirty
efficiencies. To guide operators through a series of tasks, custom environments.
displayed prompts are easily programmed using Rabbet™
Software or User C. To further improve the OI, key functions can Excitation Current Booster: Boosts excitation power on 60 Series
be defined to perform a single task or execute multiple tasks with Controllers to operate a total of 32-350 Ω load cells.
one keystroke.
• Execution Speed: The compiled C code executes faster than interpreted code.
• Extensive Function Library: The standard C library and an extensive list of functions are provided to assist in integrating the
intended application with our existing firmware routines.
• Quick Results: The only source code you write is specific to the application routines required to control the specific process and
operator interface.
• Security: The final compiled output object code file is the only file put into the field. The source code remains secure.
• Flexibility: User C provides standard weighing features that link to your custom application source code. For example, an
application can send out data by formatting the transmission and calling a User C library function. Similar degrees of freedom
apply to the processing of received data, use of databases, process control functions, and other aspects of the instrument operation.
• User C Development Kit Tools (Option):
GSE User C Function Library
GNU Compiler
Insight GDB Windows® Debug Utility
Emulation Memory Module
BDM Interface Cable with High Speed Extension Cable
© Avery Weigh-Tronix, LLC 2012. All rights reserved. This publication is issued to provide outline information only which, unless agreed by 12/2015 560 660_L_500358.indd
Avery Weigh-Tronix, LLC in writing, may not be regarded as a representation relating to the products or services concerned. AWT35-500358
Avery Weigh-Tronix, LLC reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service.
T E C H N I C A L S P E C I F I C AT I O N
560 562
SPECIFICATIONS
ELECTrICAL KEyPAd
Power Requirement: AC, 90 – 250 VAC, 50/60 Hz 560 & 562: Durable elastomeric rubber, 22 Key (Zero,
DC, 10 – 32VDC Print, Units, Tare, Select, Enter, Clear 3 Function, Scale
Excitation Voltage: 10 VDC, short circuit protected Select, clear and Full Numeric)
Excitation Current: 400 mA, short circuit protected dISPLAy
Fuse: 0.8A Slow – Blow (when using AC power) VFD (Model 560): Bright 6 digit .75” (20.3mm) Vacuum
Signal Input Sensitivity: 0.1 – 20 mV/V Fluorescent (VFD) with 2x5 (10 character) dot matrix
Signal Connection: 4 or 6 lead with sense leads for scale status and operator prompting.
Excitation Power: 14 – 350 ohm weight sensors LCD (Model 562): 8 line x 40 character graphic display,
backlight, 3 font sizes
PErFOrmANCE
Full Scale (F.S.): Selectable 0.01 to 999,990
COmmuNICATIONS
Port 1: RS232 Full Duplex serial port or RS 485 or
A/D Conversion: 60 Hz
20 mA optional
Resolution: 100,000d displayed, 1,000,000 internal
Port 2, 3: RS232 Full Duplex, no RTS on COMM 3
Flash Memory: 1 MB
Protocols: Modbus™, (DeviceNet™, Profibus, Ethernet
Zero Track: Off – 20d optional)
Zero Range: Selectable, 0.01-100% Full Scale Baud Rate: 150 – 58,300 bps
Non–Linearity: 0.005% Full Scale, Load Cell dependent Custom Transmit Tables: 100 – user defined RS232
Operating Temperature: -10° C to +40° C output tables
Units of Measure: 4 user defined per scale, 2 custom units Input Interpreter Tables: 100 – user defined RS232
Time/Date Clock: Real Time Clock input tables
DIMENSIONS
560/562
© Avery Weigh-Tronix, LLC 2009. All rights reserved. This publication is issued to provide outline information only which, unless agreed by 6/09 560series_spec_ 500378.indd (C&D)
Avery Weigh-Tronix, LLC in writing, may not be regarded as a representation relating to the products or services concerned. AWT35-500378
Avery Weigh-Tronix, LLC reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service.
t E c H n i c a l s P E c i f i c at i o n
SPECIFICATIONS
ElEctrical KEyPad
Power Input: AC, 90 – 250 VAC, 50/60 Hz, All Models: Durable elastomeric rubber,
DC, 10 – 32VDC 28 Key (Zero, Print, Units, Tare, Select, Enter, 5
DC Output: +5VDC, +24VDC Function, Scale Select, Clear ID, Start, Stop, Setup
and Full Numeric)
Excitation Voltage: 10 VDC, short circuit protected
Excitation Current: 400 mA, short circuit protected disPlay
Fuse: 0.8A Slow – Blow (when using AC power) VFD (660/665): Bright 6 digit 75” (20.3mm) Vacuum
Signal Input Sensitivity: 0.1 – 20 mV/V Fluorescent with 2x5 (10 character) dot matrix for
scale status and operator prompting.
Signal Connection: 4 or 6 lead with sense leads
(665): Bright 4 line x 20 character Vacuum
Excitation Power: 14 – 350 ohm weight sensors
Fluorescent Display, 0.31”
PErformancE LCD (662): 8 line x 40 character graphic display,
Full Scale (F.S.): Selectable 0.01 to 999,990 backlight, 3 font sizes
(663/665): 16 line x 40 character graphic display,
A/D Conversion: 60 Hz
backlight, 3 font sizes
Resolution: 100,000d display, 1,000,000 internal
Flash Memory: 1 M Bytes communications
Zero Track: Off – 20d Port 1: RS232 Full Duplex serial port or RS 485 or
20 mA optional
Zero Range: Selectable, 0.01-100% Full Scale
Port 2, 3: RS232 Full Duplex
Non–Linearity: 0.005% Full Scale, Load Cell dependent
Port 4: RS232 Full Duplex or TTL interface to 4x20 VFD
Operating Temperature: -10° C to +40° C
Protocols: Modbus™, (DeviceNet™, Profibus®,
Units of Measure: 4 user defined per scale,
Ethernet optional)
2 custom units
Baud Rate: 150 – 115K bps
Time/Date Clock: Real time clock
Custom Transmit Tables: 4 – user defined RS232
output tables
Input Interpreter Tables: 15 – user defined RS232
input tables SPECIFICATIONS CONTINuE ON NExT PAgE
660 Series Digital Indicators
t E c H n i c a l s P E c i f i c at i o n
ProcEss control I/O Relay Module: 8 variations of Quad I/O boards. (AC
I/O Scan Rate: 16 ms maximum & DC – 4 output, 4 input or 2 in/ 2 / out) only one
option mounts inside the enclosure.
Number of I/O: 128 combination, input and output
RS485 Module: Isolated multi-drop with 251 devices
PDIO Frequency: 8Hz – 100KHz
max, half or full duplex up to 4000 feet, 56K bps max
PDIO Voltage: 5 VDC
20mA Current Loop: Isolated TX-Active or Passive, RX-
Counter Input Frequency: PDIO 8Hz – 100K Hz Passive, 9600 bps max, 12VDC, 1000 foot loop
EnclosurE Database: 256K, 1 Meg, 2 Meg RAM, battery backed
Stainless Steel: NEMA 4X, IP66 design Alpha Keypad: Elastomeric, available on the 663 only
Shipping Weight: 660/662 7 lbs., 663 47 lbs., 665 13lbs. SCR Module: max load 1.75A RMS, 20-280VAC, 50/60Hz
Dura-shield: 0.020” layer of weatherable lexan film
aPProvals with adhesive backing, applies to the front of the
NTEP COC# 01-013 indicator, keeps display and keypad clean in extreme
environments
PTB
Reflash Software: download firmware enhancements
CE
and update
Canadian Weight and Measures AM-5416
DeviceNet™: ODVA approved interface module for
ETL fieldbus networking
Profibus®: PTO approved interface module for fieldbus
networking
OPTIONS Ethernet: Communication via intranet or internet
connection
Analog Output Module: 0-10 VDC, 20mA, 4-20 mA,
optically isolated, Software adjustable zero/gain (8 STVS: Severe transient voltage suppressor
analog modules max.)
Multi-scale Module: allows for simultaneous
monitoring of an additional signal input
DIMENSIONS
665
© Avery Weigh-Tronix, LLC 2009. All rights reserved. This publication is issued to provide outline information only which, unless agreed by 6/09 660series_spec_ 500379.indd (C&D)
Avery Weigh-Tronix, LLC in writing, may not be regarded as a representation relating to the products or services concerned. AWT35-500379
Avery Weigh-Tronix, LLC reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service.