Professional Documents
Culture Documents
HM89446 HM89410 TaperedRollerBearings TS (TaperedSingle) Imperial
HM89446 HM89410 TaperedRollerBearings TS (TaperedSingle) Imperial
Timken Part Number HM89446 - HM89410, Tapered Roller Bearings - TS (Tapered Single)
Imperial
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts:
the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Speci cations | Dimensions | Abutment and Fillet Dimensions | Basic Load Ratings | Factors
Speci cations
Series HM89400
0.6 Kg
Bearing Weight
1.4 lb
Dimensions
4/10/2019 | Page 2 of 4
34.925 mm
d - Bore
1.3750 in
76.2 mm
D - Cup Outer Diameter
3 in
28.575 mm
B - Cone Width
1.1250 in
23.020 mm
C - Cup Width
0.9063 in
29.370 mm
T - Bearing Width
1.1563 in
Ab - Cage-Cone Frontface 2 mm
Clearance 0.08 in
-5.6 mm
a - Effective Center Location3
-0.22 in
4/10/2019 | Page 3 of 4
26700 lbf
C0 - Static Radial Rating
119000 N
Factors
K - Factor7 1.07
instruction on use.
9 These factors apply for both inch and metric calculations. Consult your Timken representative for
instruction on use.
10 Geometry constant for Lubrication Life Adjustment Factor a3l.
0.9063
0.08
1.1250
3.0000
1.3750
2.44
1.75
2.20
2.91
-0.22
IMPERIAL UNITS
ISO Factor - e 0.55
ISO Factor - Y 1.1 HM89446 - HM89410
Bearing Weight 1.4 lb TS BEARING ASSEMBLY
Number of Rollers Per Row 18
Effective Center Location -0.22 inch
K Factor 1.07
Dynamic Radial Rating - C90 6440 lbf
THE TIMKEN COMPANY Dynamic Thrust Rating - Ca90 6020 lbf
NORTH CANTON, OHIO USA Static Radial Rating - C0 26700 lbf
Dynamic Radial Rating - C1 24800 lbf
Every reasonable effort has been made to ensure the accuracy of the information contained in this writing, but no
liability is accepted for errors, omissions or for any other reason. FOR DISCUSSION ONLY