Professional Documents
Culture Documents
Tube Settler Media...
Tube Settler Media...
Tube Settler Media...
GP-TS120/60
TUBE SETTLER MEDIA
Clarification / sedimentation is the most important stage in the field of waste water treatment. The most efficient
Sedimentation systems have high settling surface area whilst maintaining a small structure. GUDDI PLASTCON PVT LTD
tube settler media provides a large settling surface area within the specified volume thus giving high flow rates.
They have a chevron shaped self-supporting
supporting structure in a tabular form
with six sides. They are primarily used in application like solid
solid-liquid
water in clarifiers in primary & secondary sedimentation & oil water
separators.
Model : GP-TS120
GP-TS120
TS120 gives wide cross section area per tube. Even though it Plan Settling Area : 11 m²/m³ (at 60° slope)
provides
ides a slightly lower surface area than TS60, the profile has 13 m²/m³ (at 55° slope)
advantages when it comes to tube blockage or support constraints. Distance Between : Horizontal – 120mm
Adjacent Tubes : Vertical – 44 mm
GENERAL SPECIFICATIONS:
Material Of Construction PVC
Shape Of Tube Chevron-Unequal
Unequal Hexagonal/Square
Fitting Of Tube Easy to fit a tongue and groove arrangement
Thickness 1.1 mm (± 0.1 mm)
Weight per cubic meter Approximately 75 kgs.
Maximum Continuous Working Temperature 55° C
Storage Media must be stored in a covered place with adequate ventilation.