The document provides instructions for building a series resistor circuit. It lists the necessary materials including resistors, cables, a power supply, switches, and voltmeters. It then provides 10 steps to connect the components in series, with the resistors connected between the power supply and ammeters, and voltmeters connected across individual resistors. Once constructed, the switch is turned on and measurements are recorded to analyze current and voltage drops.
The document provides instructions for building a series resistor circuit. It lists the necessary materials including resistors, cables, a power supply, switches, and voltmeters. It then provides 10 steps to connect the components in series, with the resistors connected between the power supply and ammeters, and voltmeters connected across individual resistors. Once constructed, the switch is turned on and measurements are recorded to analyze current and voltage drops.
The document provides instructions for building a series resistor circuit. It lists the necessary materials including resistors, cables, a power supply, switches, and voltmeters. It then provides 10 steps to connect the components in series, with the resistors connected between the power supply and ammeters, and voltmeters connected across individual resistors. Once constructed, the switch is turned on and measurements are recorded to analyze current and voltage drops.
The document provides instructions for building a series resistor circuit. It lists the necessary materials including resistors, cables, a power supply, switches, and voltmeters. It then provides 10 steps to connect the components in series, with the resistors connected between the power supply and ammeters, and voltmeters connected across individual resistors. Once constructed, the switch is turned on and measurements are recorded to analyze current and voltage drops.
1. Fiest of all, prepare the material and equipment.
Some Cables Power supply (accu) Electric Switch Voltmeter Amparemeter Resistor Attention : Before you arrange the circuit (by plug in the cables), make sure that the electric switch is off. 2. Then, plug in the cable into positive (+) pole of power supply and electric switch to connecting those two equipment. 3. Plug in again the cable to another pole of electric switch and connect the cable to the positive pole of the amparemeter. 4. Plug the cable into the negative (-) pole of amparemeter and connect to the first resistor. 5. Plug the cable into another pole of first resistor and connect to the second resistor. 6. Plug the cable into another pole of second resistor and connect it into the negative (-) pole of power supply (accu) 7. Next, plug the cable into the first resistor and connect it into the positive (+) pole of the first voltmeter. 8. Plug the cable into the negative (-) pole of first voltmeter and connect to another pole of first resistor. 9. Repeat the 7 & 8 steps for connecting the second and third voltmeter to the second resistor and power supply. 10. After that, the circuit have done. Turn on the electric switch to measure the strains or electrical current. 11. Write down the data and solve the formula.
Information : one cable per step (step 2 – step 9)