Professional Documents
Culture Documents
Conversion Adapter PDF
Conversion Adapter PDF
Machine/line modifications
using the small type modules Machine/line modifications using CC-Link
A-A1S module
conversion adapter
A-A1S module (A1ADP-SP)
conversion adapter
(A1ADP-앮*)
*: 앮 •“XY” when the module to be installed is I/O module Mitsubishi Electric Corporation Nagoya Works is a factory certified for ISO14001
(standards for environmental management systems) and ISO9001(standards for
• “SP” when the module to be installed is special function module quality assurance managememt systems)
I/O allocation module types (input, output, special) and A-A1S module
conversion adapter types may differ.
Before selection, refer to “Compatible modules list” given on page 2 and 3.
Refer to the technical news (T99-0050F or later) for A/QnA large type
module and AnS (small type) series performance/specification comparisons.
EC97J1113
Features
STEP2
Utilizing the A-A1S module conversion adapter,
attach the AnS (small type) series module to the A
(large type) series base unit empty slot.
A-A1S module
conversion adapter
* In order to do this machine/line modification, it is
(A1ADP-씲*)
necessary to have "Empty slots in the existing
system and extra I/O points available". AnS/A (small type) series
I/O modules and special
function modules, etc
STEP2
Attach to the A (large type) empty base slot, the AnS
(small type) series CC-Link system master/local
station module using the A-A1S module conversion
adapter, and add modules using the CC-Link system.
AnS (small type)
series CC-Link
master module
When "there are no open slots on the (A1SJ61(Q)BT11)
existing system" or "there are no spare I/O
points left", in order to attach the CC-link
master/local station module, take off one/or
some existing modules from the existing CC-Link
system. Also, add a module on the CC-link remote I/0
remote in order to replace the modules that
were removed that corresponds.
Up to three A-A1S module conversion adapters can be installed on one base unit.
1
Compatible models list
: Mountable : Not mountable
2
: Mountable : Not mountable
3
Attention in use
■ The number of mounted modules of each one base unit
Up to three modules can be installed to one base unit. Use within the available number of modules mounted to
each unit to execute proper operation.
■ 5VDC internal current consumption
When replacing the A (large type) series module by the AnS (small type) series module, the internal current
consumption may increase. At replacement, confirm that the current consumption of the modules mounted on
the base units does not exceed the rated output current of the power supply module used. (Check the A-A1S
module conversion adapter internal current consumption on the following table of performance specifications.)
■ Installing on the extension base units which do not require power supply module
If the AnS (small type) series module is installed to an extension base unit not needing a power supply module
(A52B, A55B, or A58B), confirm that the voltage at the receiving end is more than 4.75V. (Check on the
chapter of “Base Unit And Extension Cable” in the A Series User's Manual for the details.)
■ Installing the dustproof cover
Be sure to attach a dustproof cover to prevent defect or an electric shock caused by foreign objects entering to
inside the module.
쎲 AnS (small type) series module
Install to the A-A1S module conversion adapter after attaching the dustproof cover included with it to the
AnS (small type) series module.
쎲 A (large type) series module
When using the A (large type) series module to which the A-A1S module conversion adapter
has been installed on the right side, attach a dustproof cover to the module. (prepared by user)
*Product name: A55B, A58BI/O dustproof cover maker
■ Replacing existing module
When replacing the A (large type) series module by the AnS (small type) series module, the specifications
differ depend on the modules.
Refer to the technical news (T99-0050F or later) for confirmation of the equivalents and specifications.
■ Depth dimension of the AnS (small type) series 32-point I/O connector type module
When replacing the large type 32-point terminal block module by the small type 32-point connector type module, the
depth dimension may increase. (refer to the following figure.) Check the depth dimension for the installation site.
Comparison of the dimensions between the large type 32-point terminal block module
and the small type 32-point connector type module
Unit: mm (inch)
A series 32-point
terminal block module
A1ADP
Performance specifications
Model A1ADP-XY A1ADP-SP
Item
5VDC internal current consumption 3.4mA 0mA
External dimensions 250mm(H) x 37.5mm(W) x 35.5mm(D)
Weight 0.2kg
Supplied parts The dustproof cover for the AnS (small type) series
4
External dimensions
(0.08)
2.0
4.2 4.2
(0.17) (0.17)
A1ADP- XY A1ADP- SP
250(9.84)
130(5.12)
130(5.12)
Product list
Manuals
A- A1S Module Conversion Adapter User's Manual Included with product IB-0800352-A or later 13JQ00
U.S.A Mitsubishi Electric Automation Inc. Tel: +1-847-478-2100 Taiwan Setsuyo Enterprise Co., Ltd. Tel: +886-2-2299-2499
500 Corporate Woods Parkway Vernon Hills, IL 60061, USA Fax: +1-847-478-2396 6F., No.105 Wu-Kung 3rd.Rd, Wu-Ku Hsiang, Taipei Hsine, Fax: +886-2-2299-2509
Brazil MELCO-TEC Rep. Com.e Assessoria Tecnica Ltda. Tel: +55-11-3262-4759 Taiwan
Rua Correia Dias, 184, Edificio Paraiso Trade Center-8 andar Fax: +55-11-288-3047 Korea Mitsubishi Electric Automation Korea Co., Ltd. Tel: +82-2-3660-9552
Paraiso, Sao Paulo, SP Brazil 1480-6, Gayang-dong, Gangseo-ku, Seoul 157-200, Korea Fax: +82-2-3664-8372
Germany Mitsubishi Electric Europe B.V. German Branch Tel: +49-2102-486-0
Gothaer Strasse 8 D-40880 Ratingen, GERMANY Fax: +49-2102-486-1120 Singapore Mitsubishi Electric Asia Pte, Ltd. Tel: +65-6470-2460
U.K Mitsubishi Electric Europe B.V. UK Branch Tel: +44-1707-276100 307 Alexandra Road #05-01/02, Fax: +65-6476-7439
Travellers Lane, Hatfield, Hertfordshire., AL10 8XB, UK Fax: +44-1707-278695 Mitsubishi Electric Building Singapore 159943
Italy Mitsubishi Electric Europe B.V. Italian Branch Tel: +39-039-60531 Thailand Mitsubishi Electric Automation (Thailand)Co., Ltd. Tel: +66-2-682-6522
Centro Dir. Colleoni, Pal. Perseo - Ingr.2 Fax: +39-039-6053312 Bang-Chan Industrial Estate No.111 Moo 4, Serithai Rd, Fax: +66-2-682-6020
Via Paracelso 12, I-20041 Agrate Brianza (Milano), Italy T.Kannayao, A.Kannayao, Bangkok 10230 Thailand
HEAD OFFICE: TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
NAGOYA WORKS: 1-14, YADAMINAMI 5, HIGASIKU, NAGOYA, JAPAN