Professional Documents
Culture Documents
Dslam Commissioning Steps Punjab For 960 Port PDF
Dslam Commissioning Steps Punjab For 960 Port PDF
Dslam Commissioning Steps Punjab For 960 Port PDF
Open FTP SERVER and give the path where the files are stored.
VDR-DLM-NSN-960-AND-01#configure terminal
VDR-DLM-NSN-960-AND-01(config)# download cxu load 192.168.1.1 she_r2.8_cxu-
b2_o.209
FTP User Name: nsn
FTP Password :
timeout (1200 seconds) activeftp=ftp -n ip =192.168.1.1 src= she_r2.8_cxu-
b2_o.209dst=/dev/os2 cmd=get usr=nsn
.....
download cxu load file she_r2.8_cxu-b2_o.209 from server 192.168.1.1 complete
VDR-DLM-NSN-960-AND-01(config)#reset all
Switch with reboot (Y/N): Y
VDR-DLM-NSN-960-AND-01(config)#bridge
VDR-DLM-NSN-960-AND-01(bridge)# vlan create 122 (WHEN CONNECTED TO
RPR) otherwise if connected to OCLAN Management vlan should be 114
VDR-DLM-NSN-960-AND-01(bridge) #vlan add 122 0/1 tagged
VDR-DLM-NSN-960-AND-01(bridge)#wr mem
VDR-DLM-NSN-960-AND-01(bridge)#exit
ASSIGN IP ADDRESS to the MANAGEMENT VLAN
ASSIGN BNG IP
PING BNG IP
VDR-DLM-NSN-960-AND-01(config)#exit
VDR-DLM-NSN-960-AND-01# ping 10.234.210.1
PING 10.230.210.1 (10.230.12.1) from 10.230.210.2 : 56(84) bytes of data.
64 bytes from 10.230.210.1: icmp_seq=0 ttl=64 time=0.2 ms
64 bytes from 10.230.210.1: icmp_seq=1 ttl=64 time=0.2 ms
64 bytes from 10.230.210.1s: icmp_seq=2 ttl=64 time=0.1 ms
--- 10.230.210.4 ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 0.1/0.1/0.2 ms
After that
SWITCH(bridge)# wr mem
NOW THE DSLAM IS UPGRADED WITH THE LATEST CXU AND IU CARD
VERSIONS AS WELL AS THE CONFIGURATION FILE FOR 960PORT HAS
BEEN UPLOADED.
WE CAN CHECK THE VLAN’s that has been created and that has been tagged in
the uplink port of dslam and untagged in the downlink ports. For 960 Port DSLAM
vlan’s are untagged in downlink port from 128-991 and tagged in the uplink ports.
20 MB PROFILE-
SWITCH(config)#bridge
SWITCH(bridge)#xdsl add chan-config-profile ADSL20MB
SWITCH(bridge)# xdsl chan-config-profile ADSL20MB datarate-max-ds 20480
SWITCH(bridge)# xdsl chan-config-profile ADSL20MB datarate-max-us 2048
SWITCH(bridge)# port lre 1/1 disable
SWITCH(bridge)#lre 1/1 xdsl chan-config channel1 ADSL20MB
SWITCH(bridge)# port lre 1/1 enable
Wr mem
Now Remove the Fiber the From Master cxu Card than slave fiber will be activeted
If the media is through we can ping the BNG and we can check browsing in the
MDF