2. Check Ping test for Gateway IP from Plan BSC/RNC to CTN. 3. Check Ping test for Service IP from BSC/RNC to Site. 4. Check there is no SCTP related alarm after integration. 5. Check physical hardware slot position with according to Logical View. 6. Check Physical SFP module with Configuration (FS5A and RRU) 7. Check there is no alarm related with RRU and BBU board position/configuration (Except “Disable PA” and “VSWR Alarm”) 8. Check there is any TRX capacity related Alarm (“Config error Alarm”) 9. RET/TMA configuration done according from site information 10.Check all external alarm by loop from site