Professional Documents
Culture Documents
Iat Tos
Iat Tos
document #:
CBLM on date developed: Issued by:
Trainers Methodology Level 1 November 2018 Subic Bay page
EIM NC-II developed by: Colleges, Inc. 1of5
E.D. PADULLON
date modified:
modified by: revision #:00
Safety Questions Yes No
17. What might happen if you did not follow the safety
standard and procedures in installing electrical job?
document #:
CBLM on date developed: Issued by:
Trainers Methodology Level 1 November 2018 Subic Bay page
EIM NC-II developed by: Colleges, Inc. 2of5
E.D. PADULLON
date modified:
modified by: revision #:00
Rules and Regulations Yes No
18. What is the maximum allowable training hours for
a trainee inside the Workshop / Training area
19. Wearing of Slipper and Sando is NOT allowed
during the training hours.
20. Keep your work area Neat, Clean and arranged
after the scheduled training hours.
21. Safety standards and procedures in accordance to
PEC and OSH must always be implemented.
document #:
CBLM on date developed: Issued by:
Trainers Methodology Level 1 November 2018 Subic Bay page
EIM NC-II developed by: Colleges, Inc. 3of5
E.D. PADULLON
date modified:
modified by: revision #:00
Answers:
Extension/Reflection Questions:
1. Check using multi meter if there is a current running through the
device, if none , we turn OFF the main power from panel to remove the
circuit breaker for troubleshooting.
2. Circuit Breaker and GFCI (Ground fault circuit interrupter are some of
the types of a circuit breaker).
3. Checked for the cable or wire continuity.
4. Try to check if the battery is still ok; also checked if the probe pointer
handle is broken and has cut on the cable.
5. Ampere or Amperes.
6. Junction Box.
Safety Questions:
7. The basic PPE’s used in installing electrical protective device are
Hardhat, eye goggle,vest, gloves and safety shoes
8. No, I will request for a proper and functioning Personal Protective
devices to be worn before I start doing the job.
9. Yes I will turn the Main Breaker to the OFF position to avoid electrical
shock when we start to install the new Circuit Breaker,
10. Yes I will practice installing electrical lay-out and cabling of wires and
cables in accordance to PEC and OSH to avoid accidents and damage to
the property.
11. Horseplay is not allowed during the training because it can disturb
other trainees, and also can cause damage to materials and equipments.
12. Use the materials, equipments and tools carefully and return it to its
designated cabinets /area for the next users.
13. Help in cleaning the workshop area, and avoid littering.
14. An electrician is the one doing the electrical works in a house, office,
building, etc. He is also in-charge in troubleshooting and repairing any
electrical error and problems.
Contingency Questions
15. a spliced wire that is not properly inserted in a hole of a convenience
outlet can cause arching of electricity and later on causes fire.
16. The circuit breaker automatically cut the connection of wire or open the
connection of the entire circuitry by tripping the circuit breaker to cut the
current flowing.
document #:
CBLM on date developed: Issued by:
Trainers Methodology Level 1 November 2018 Subic Bay page
EIM NC-II developed by: Colleges, Inc. 4of5
E.D. PADULLON
date modified:
modified by: revision #:00
17. It can cause electric shock to a nearby person or worst can cause fire to
a certain house.
document #:
CBLM on date developed: Issued by:
Trainers Methodology Level 1 November 2018 Subic Bay page
EIM NC-II developed by: Colleges, Inc. 5of5
E.D. PADULLON
date modified:
modified by: revision #:00