Professional Documents
Culture Documents
Levi VS Logo8 en
Levi VS Logo8 en
LEVI Vs Logo8
Used products :
LEVI700E-N + LOGO8
Website: http://www.tecno-automazioni.com
email : mdimaio@tecno-automazioni.com
by
Maurizio
Di
Maio
:(&21/(9,6HULHV+0,
In the Logo program enter a new compatible device S7 and set the fields as shown in
Figure 3 of page 2.
In the HMI software you must set the IP address of Logo8 (Fig. 4 - p. 3) and IP and
gateway addresses of the HMI (Fig. 5 - p. 3)
For the exchange of data between Logo8 and HMI you must enter in the first, the blocks
Network as:
Analog inputs Network - Network Inputs - Outputs Network
.
.
.
.
.
.
.
.
.
As you can see in the pages 4, 5 and 6 you can use the memory areas of the
Logo8 ( VM and VB ) to exchange words and bit matching them to the HMI
address DBxDBW and DBxDB are depending on word or bit
by
Maurizio
Di
Maio
:(&21/(9,6HULHV+0,
LOGO8
Fig. 1
Fig.2
Fig. 3
by
Maurizio
Di
Maio
:(&21/(9,6HULHV+0,
HMI
Fig. 4
Fig. 5
by
Maurizio
Di
Maio
:(&21/(9,6HULHV+0,
Fig. 6
Fig. 7
by
Maurizio
Di
Maio
:(&21/(9,6HULHV+0,
Fig. 8
Fig. 9
:(&21/(9,6HULHV+0,
Fig. 10
Fig. 11