Professional Documents
Culture Documents
C11 ACERT 261bkW
C11 ACERT 261bkW
C11 ACERT 261bkW
Industrial Engine
Tier 3/Stage IIIA
261 bkW/350 bhp @ 2100 rpm
FEATURES
Emissions Full Range of Attachments
Meets U.S. EPA Tier 3, EU Stage IIIA emission Wide range of bolt-on system expansion
requirements. attachments, factory designed and tested.
Exhaust System
Exhaust manifold, dry
Optional exhaust outlet
IND - B - DM7691-04
Torque Metric
N•m
Engine
Power kW
BSFC
g/kW-hr
Engine Speed Engine Power Torque N•m BSFC g/kW-hr Fuel Rate L/hr
rpm kW
2100 261 1187 233.5 72.7
2000 261 1246 227.1 70.7
1900 261 1312 222.7 69.3
1800 261 1385 218.9 68.1
1700 258 1449 214.2 65.9
1600 253 1510 209.3 63.1
1500 245 1560 209.5 61.2
1400 234 1596 210.7 58.8
1300 215 1579 209.8 53.8
1200 194 1544 211.9 49.0
1100 164 1424 215 42.0
IND - B - DM7691-04
Engine English
Torque
lb•ft
Engine
Power bhp
BSFC
lb/bhp-hr
Engine Speed Engine Power Engine Torque BSFC lb/bhp-hr Fuel Rate
rpm bhp lb•ft gal/hr
2100 350 875 .384 19.2
2000 350 919 .373 18.7
1900 350 968 .366 18.3
1800 350 1022 .360 18.0
1700 346 1069 .352 17.4
1600 339 1114 .344 16.7
1500 329 1151 .344 16.2
1400 314 1177 .346 15.5
1300 288 1165 .345 14.2
1200 260 1139 .348 12.9
1100 220 1050 .353 11.1
IND - B For service where power and/or speed are Engine Performance Diesel Engines — 7 liter and
cyclic (time at full load not to exceed 80%). higher All rating conditions are based on SAE J1995,
inlet air standard conditions of 99 kPa (29.31 in. Hg)
dry barometer and 25ºC (77ºF) temperature.
Performance measured using a standard fuel with
fuel gravity of 35º API having a lower heating value
of 42,780 kJ/kg (18,390 btu/lb) when used at 29º C
(84.2º F) with a density of 838.9 g/L.
Engine Dimensions
(1) Length 1202.6 mm (47.35 in) Note: Do not use for installation design.
See general dimension drawings for
(2) Width 1054.4 mm (41.51 in) detail (Drawing # 2588858 ).
(3) Height 1185.5 mm (46.67 in)