Professional Documents
Culture Documents
CDS-IV - MECHANICAL MODEL QUESTION (06-10-2018) New
CDS-IV - MECHANICAL MODEL QUESTION (06-10-2018) New
15) Which of the following relations is true when springs are connected
parallelly? where K = spring stiffness
A. Ke = K1 + K2
B. (1 / Ke) = (1/K1) + (1/ K2)
C. Ke = (1/K1) + (1/ K2)
D. None of the above
ANSWER: A
17) What is the range of audible sound pressure to which a human ear can be
Subjected to?
A. 10-5 N/m2 to 10-12 N/m2
B. 10-12 W/m2 to 10 W/m2
C. 2 x 10-5 N/m2 to 200 N/m2
D. 2 x 10-5 N/m2 to 300 N/m2
ANSWER: C
18) Sound wave has a frequency of 8 kHz at 22o C. Determine its wavelength.
A. 0.043 m
B. 0.039 m
C. 0.125 m
D. 0.0125 m
ANSWER: A
20) Which type of earplugs contain silicon rubber and a fixing agent?
A. Semi insert protectors
B. Custom moulded earplugs
C. Pre-fabricated earplugs
D. Canal caps
ANSWER: B
22) Solid length for helical compression springs having square and ground ends
is given as _________.
A. (n + 2)d
B. (n + 3)d
C. (n + 1)d
D. None of the above
ANSWER: A
32) Which of the following factors are not considered while selecting values for
factor of safety?
A. Cost
B. Failure consequences
C. Degree of uncertainty about loading and material
D. None of the above
ANSWER: D
35) If welds are designed with in-plane eccentric load, then eccentric load can be replaced by _
A. parallel force
B. twisting moment
C. both A. and B.
D. none of the above
ANSWER: C
38) The body which absorbs all radiations incident upon it, is called as
A. Black body
B. White body
C. Opaque body
D. Transparent body
ANSWER: A
45) What happens when the thickness of insulation on a pipe exceeds the critical value?
A. Heat transfer rate increases
B. Heat transfer rate decreases
C. Heat transfer rate remain constant
D. none of these
ANSWER: B
46) In heat exchangers, the value of logarithmic mean temperature difference should be
A. maximum possible
B. minimum possible
C. zero
D. constant
ANSWER: A
47) Air at 20° C blows over a plate of 50 cm x 75 cm maintained at 250° C. If the convection
heat transfer coefficient is 25 W/m2 °C, the heat transfer rate is
A. 215.6 kW
B. 2156 kW
C. 2.156 kW
D. 21.56 Kw
ANSWER: C
49) The process of heat transfer from one particle of the body to another without actual motion
of the particle is called
A. Radiation
B. Conduction
C. Convection
D. None of these
ANSWER: A