Professional Documents
Culture Documents
Design and Analysis of Residential Building Using E-TABS
Design and Analysis of Residential Building Using E-TABS
Dating back more than 30 years to the original 3. Analysing and designing of Residential
development of ETABS, the predecessor of ETABS, it was building(G+1) for worst case of load combination
clearly recognized that buildings constituted very special
class structures. Early releases of ETABS provide input,
output and numerical solution techniques that took into
consideration and characteristics unique to building type
structure, providing a tool that offered significant savings in
time and increased accuracy, over general purpose
programs.
© 2018, IRJET | Impact Factor value: 6.171 | ISO 9001:2008 Certified Journal | Page 942
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 05 Issue: 05 | May-2018 www.irjet.net p-ISSN: 2395-0072
Importing to Etabs
Building modeling in
Etabs
Check results
Table -1: SILENT FEATURE OF PROPSED BUILDING:
Design using Etabs
software
Sl.No Description Features
1 LOCATION BANGLORE comparison
4. Analysis Methods
© 2018, IRJET | Impact Factor value: 6.171 | ISO 9001:2008 Certified Journal | Page 943
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 05 Issue: 05 | May-2018 www.irjet.net p-ISSN: 2395-0072
Design of slab 3:
LY = 3.9 m ,
LX = 3.5 m,
Aspect ratio (ly/ lx) =3.9/3.5=1.11 < 2 (hence two way slab )
One short edge discontinuous.
x y MX =x My =Y * Dia Dia
* w*LX2 spacing spacing
w*LX2 x y
-ve 0.048 0.037 5.5 4.5KN.m 10 dia 8 dia
reinforcement KN.m 200 180
mm c/c mm c/c
Fig-4: Shear force diagram from Etab +ve 0.036 0.028 4.2 3.5 8 dia 8 dia
reinforcement KN.m KN.m 180 180
mm c/c mm c/c
6. DESIGN DETAILS
Slab 6: Lx=2.4, Ly =5.0, aspect ratio ( Ly/LX )= 2.1 > 2 , one
Design of slab 1 way slab )
Lx=2.40 m Total load on slab = 9.35 kN/m2
Ly=4.37 m MX= w *Lx2 / 8 = (9.35 *2.4 2)/8
LY/Lx =1.80 < 2 (Hence slab designed as two way ) = 6.73 kN.m
Total load on slab = 9.35 kN/m2 Factored moment = 1.5 *6.73 = 10 kN.m
Factored moment =10 Kn-m Assuming 8 dia @ 270 mm c/c (main reinforcement)
Assuming depth of slab = 150 mm Distribution reinforcement
Design of the as under reinforced Ast as distribution reinforcement = 0.12 %*1000*150
Slab cover =25 mm =180 mm2
Bend the alternative bars@ a distance of L/7 from the face of Spacing of 6 mm dia =3.142 *62*1000/(4*180)
the wall = 2.40 / 7= 0.342 m = 150 mm
Assuming dia 8mm 150 c/c (main reinforcement) So, provide 8 mm dia @ 150 c/c.
© 2018, IRJET | Impact Factor value: 6.171 | ISO 9001:2008 Certified Journal | Page 944
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 05 Issue: 05 | May-2018 www.irjet.net p-ISSN: 2395-0072
© 2018, IRJET | Impact Factor value: 6.171 | ISO 9001:2008 Certified Journal | Page 945
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 05 Issue: 05 | May-2018 www.irjet.net p-ISSN: 2395-0072
© 2018, IRJET | Impact Factor value: 6.171 | ISO 9001:2008 Certified Journal | Page 946