Name of Work: Installation of one RO water plant of capacity 500 liters per hour at Special Group, Sarsawa.
SCHEDULE OF QUANTITY
Name of the Contractor
Quoted rates Rate in
S. Description of Items Qty Unit are negative Figures in Amount No. or positive Rupees
Normal Item 0
Subhead-I (RO Plant) Normal Item 0
1 Supply installation testing and commissioning of 500 Ltr/hr Capacity
Reverse Osmosis system designed to produce drinking water as per WHO normes in existing shade consisting following accesories including electrical /water Line connections, interconnections etc. as reqd at site ,Make of R.O.System-Thermax/Ion Exchange/Rochem a) Water Treatment Plant:- SITC of multi graded filter manufacturered with foodgraded non-toxic FRP shall be complete with all accessories as per the approved OEM standards accessories , Backwashing provision of sample cocke with isolation wall, Pressure gauges at inlet and outlet line with isolation wall , provision of airvent , The system shall be fitted with inlet distribution for equalized distribution and bottom collecting system set of of PVC strainer, Initial charge of media. Cap. 1500 Liters per Hour (Max) 1 No Normal Item 16038.00 16038.00 Make -Thermax/Ion Exchange/Rochem
b) Supply installation testing and commissioning of activated carbon
filter manufacturered with foodgraded non-toxic FRP shall be complete with all accessories as per the approved OEM standards accessories, Activated Carbon Filter of capacity 1500.0 Liters per hour,Max .working pressure 2.5 (kg/cm2),Min. working pressure -1.5 (kg/cm2), Activated Carbon of IV-800 -qty-50 kg,with provision of MPV and frontal piping provision of backwashing etc. 1 No Normal Item 20680.00 20680.00 Make -Thermax/Ion Exchange/Rochem
c) ANTI SCALING DOSING SYSTEM Supplying, installing, testing
and commissioning of Online mechanically actuated diaphram metering pumps for Chemical dosing system having facility to control the strokes from 10 to 80 %, consisting of one HDPE tank of 200 litres capacity with a positive displacement diphram,flowrate of 0-4 lph, At. 2.5 Kg/cm2. The pump shall be suitable for operation at 240 V / single phase /50 Hz. Supply. necessary polypropylene piping, valves, strainers, low level switch and injection fittings with 100 Ltrs chemical tank. Make-Ion Exchange/Thermax/Asia LMI / equivalent make completed etc 1 Job Normal Item 15600.00 15600.00 d) Supply, Installation,Testing & Commissioning of R.O.Feed Pump with MOC-CI, Impeller-SS/Bronze ,Flow Rate- 1500 LPH at 25 meter head, suitable for run on single phase 230 Volt 50Hz AC supply , should be placed on common base frame of MS-C chanel having avtivibration pad,NRV & ball valve on delivery side with pressure guage on delivery with isolation valve etc as reqd. 2 no's(1w +1sb) 1 Job Normal Item 41296.00 41296.00 e) Reverse Osmosis System:Installation,Testing & Commissioning of Industrial type heavy duty R.O.System,should have min recovery of 50 % with Skid: MS with seven tank powder coating,Reverse Osmosis Membrane:TFC membrane of 4 Inches Dia & 40 Inches length(4040)-2 no's,made up low pressure TFC,suitable upto 2500 PPM TDS,and should have rejection ration of min-95%,should not be of chinese make,preferred make- as per OEM,High Pressure Pump: Vertical high pressure pump, MOC is SS-304/316 with mechanical seal,drive motor in three phase,3 Hp,with atleast 65% efficiency, with IE-III motors, preferred make-Grundfos.Flow Rate-3 m3/hr at 140 meter head,Switches: High Pressure Switch,Low Pressure Switch, Online Conductivity/TDS meter,level controller to run the plant automatically, Plant should have facility to autoflush the membrane between 10 mins to 120 mins flexibility,also run the high pressure pump after 1 min to 60 mins.i/c Connection interconnection with the help of food graded havey duty PVC /SS piping i/c providing fixing valve and glycrene filed pressure gauge , electric controle panel shuld have facility of automation in raw and treated water tank to run the sysytem according to water level as per standerd Disply and indication complete as reqd. at site. 1 Sets Normal Item 289071.00 289071.00 f) Online U.V.System: supply,Installation,Testing,Commissioning Of Ultra Violet System with having 500 Ltr /hr Flow rate , MOC-SS 316, suitable for single phase 230 volt 50 Hz AC supply with Hr meter comple as reqd. Make-Alfa/Grundfos 1 Nos. Normal Item 7800.00 7800.00 g) Ultra Filtration Membrane System:- Supply,Installation,Testing,Commissioning Of Ultra Filtration Membrane system with Flow Rate-20 LPH, Make- Ion Exchange/Pentair/Hitech. 1 Nos. Normal Item 1652.00 1652.00 h) Inter Connecting Pipe Works:- Supply fixing 25 mm dia UPVC pipe for plant interconnction complete with accessories as reqd. Pipeing shall be as per IS- 15778 ,NSF approved, pressure rating-16 kg/cm2. Make- Supreme/Prince/Astral 10 Mtr Normal Item 252.00 2520.00 2 Supply installation connection testing and commissioning Triple Layer food graded PVC tank of 2000 Ltrs Capacity 1 no for Raw water makup tank and other 1 for treated water storage tank (Make :-sintex Product code CCWS10003) 2 Each Normal Item 18300.00 36600.00 Subhead-II (Earthwork & shed) 1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. a All kinds of soil. 1.5 cum Normal Item 166.47 250.00 2 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : a 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 1 cum Normal Item 5481.95 5482.00 b 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) 1 cum Normal Item 4209.05 4209.00 3 Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: a Cement Mortar 1:6 (1 cement : 6 coarse sand). 6 cum Normal Item 4751.65 28510.00 4 Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. a Hot finished welded type tubes 300 kg Normal Item 90.25 27075.00 5 12 mm cement plaster of mix : a 1:6 (1 cement: 6 coarse sand) 10 sqm Normal Item 160.35 1604.00 6 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : a Two or more coats on new work 10 sqm Normal Item 93.77 938.00 7 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 12 sqm Normal Item 550.40 6605.00 Subhead-III (EI work) 1 Supplying & Fixing of 50 mm outer dia (NS) DWC high density polyethylene pipe having corrugated on outer wall & plain surface inner wall confirming to IS:14930 part I & II complete with necessary HDPE fitting for proction of 1.1 KV grade underground cable directly in ground at depth of not less than 0.60 mtr i/c excavation & refilling the trench & making good the damage as same as req. 86 mtr Normal Item 138.00 11868.00 2 Supplying & Laying 3.5 X 35 sqmm sizes XLPE insulated and PVC sheathed Aluminium conductor armoured power cable of 1.1 KV grade in following manner i/c connection and testing etc as reqd (Make - Polycab/ Grandlay/ Gloster/ Phenolex) a In DWC/GI pipe 86 mtr Normal Item 231.00 19866.00 b Loose for connection 14 mtr Normal Item 227.00 3178.00 3 Supplying and making end termination with brass compression gland and aluminium lugs for 3.5 X 35 sq. mm (32mm) size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 2 each Normal Item 282.00 564.00 4 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing cable etc as reqd. 200 each Normal Item 23.00 4600.00 5 Supplying and fixing 100 Amp 25 KA TP MCCB in the existing F/P i/c both side spreaders link complete with connections, testing and commissioning etc. as required. (Make - Legrand /Siemens/L&T) 1 Each Normal Item 7214.00 7214.00 Normal Item 0.00 Grand Total 553220.00 NOTE: 1. If quoted rates is "Normal Item" this amount will be paid to contractor/Firm by CPWD. IF quoted rates is "Minus Item" this amount will be paid to CPWD by contractor/Firm. 2. If any cells (Rates) left Blank, then the same will be treated as "Zero".