Professional Documents
Culture Documents
Firmware Change/Update SONY Xperia X Performance: Necessary Tools and Drivers
Firmware Change/Update SONY Xperia X Performance: Necessary Tools and Drivers
Firmware Change/Update SONY Xperia X Performance: Necessary Tools and Drivers
info:
2. Unpack and Install FlashTool, then find x10flasher.jar which is in C:\FlashTool folder
and replace it with the file from the unpacked archive.
Windows 10 users should go to c:\Windows\inf and search for the file "wpdmtp.inf"
press right button on it and select INSTALL.
WARNING!
Changing firmware in the phone will erase all of your data.
All described operations you are doing at your own risk.
If want saves your data do a backup before start.
Battery must be at least 60% if not you will kill phone completely.
also, you can find it in Xperia X Performance phone menu as shown below
or from the label which can be found next to the phone sim/memory card slot.
2. Turn on FlashTool(depent on windows system 32/64bit use file Flashtool or Flashtool64)
3. Go to XperiFirm,
4. Select SONY Xperia X Performance model,
5. Now choose exact Xperia X Performance model from step No. 1.
14. Connect turned off Xperia X Performance phone to USB cable with pressed volume
down button.
15. Release volume down button when you see "Device connected in flash mode" information
in FlashTool windows log.The flash process starts, now just wait until process end.
16. After all disconnect Xperia X Performance phone from the USB cable. Turn it on
with the power button and leave it on a flat surface until phone turns on completely
(this is very important otherwise the phone will not complete the first start and you will see
an error message on the phone screen).
17. Congratulations your flash process ended successfully. Now you can enjoy
your SONY Xperia X Performance with new firmware.