Professional Documents
Culture Documents
120kn Gravity Luffing Arm Type Davit 120kn艇架 规格书(中英)
120kn Gravity Luffing Arm Type Davit 120kn艇架 规格书(中英)
完工图
FINAL DRAWING
项目 PROJECT:
3000T/2000T 起重铺管船
用户 MESSRS:
上海振华港口机械股份有限公司
Shanghai Zhenhua Port Machinery CO.,LTD
船号 HULL NO.:
ZPMC1018
设备 EQUIPMENT:
120KN 重力倒臂式吊艇架
120KN GRAVITY LUFFING ARM TYPE DAVIT
100KN 电动起艇绞车
100KN ELECTRIC BOAT WINCH
设备制造厂 MANUFACTOR:
江阴市北海救生设备有限公司
JIANGYINSHI BEIHAI LSA CO., LTD
编制 DESIGNED BY:
校对 CHECKED BY:
审核 VERIFIED BY:
日期 DATE: 2009-10
SHEET 1 OF 5
120KN 重力倒臂式吊艇架
120KN HINGED GRAVITY ARM TYPE DAVIT
目录 CONTENTS
1、 封面 COVER
2、 目录 CONTENTS
3、 规格书 SPECIFICATION
12、 底座 BASE
SHEET 2 OF 5
120KN 重力倒臂式吊艇架
SHEET 3 OF 5
技术规格书
TECHNIAL SPECIFICATION
江阴市北海救生设备有限公司
JIANGYINSHI BEIHAI LSA CO., LTD
1. 概述 General
1-1 本吊艇架的制造和试验经过( ABS ) 船级社认可并满足 MSC.47(66)
—“1974 年国际海上人命安全公约”96 修正案“和 MSC.48(66)—“国际
救生设备规则”的要求。
The davit is manufactured and test under the approval of Classification Society
( ABS ) compliance with the requirement of the last Amendments to SOLAS &
LSA code.
1-2 本吊艇架是重力式,即仅依靠艇自身的重力放艇。
The davit is a (hinged) type davit and it lowers the boat on the water by the help of
its own weight (gravity davit).
1-3 本吊艇架是从存放位置登艇。救生艇能在较短的时间内,没有任何停顿、连
续地下放至水面
The davit is designed for boarding the boat in stowed position. The boat may be
SHEET 4 OF 5
lowered without stopping as turning out and lowering is a continuous movement
at a minimum of time-spending.
1-4 救生艇可以通过遥控下放。操作人员在艇内通过小卷筒上的遥控钢丝绳遥控
抬起艇机刹车重锤,可使救生艇顺利下放或停止。操作人员也可以在甲板上
直接操作刹车重锤。
The boat is turned out and lowered by means of remote control that the crew can
release and stop the hand brake of the winch from inside of the boat via wire
connection to the brake arm and wire spool on the small drum. Alternatively the
crew can operate the hand brake on the deck.
1-5 在救生艇的头部和尾部各有套系艇装置,捆绑住救生艇。防止救生艇在风浪
中摇晃。
Lashing arrangement for boat can be released manually by using the slip hooks on
FWD and AFT lashing.
1-6 装有电动机的绞车是来回收带有 6 人的救生/救助艇,并返回至登乘甲板。
A permanently mounted motor on the winch is used for hoisting the life/rescue boat
with 6(six) persons back to stow position.
1-7 本绞车上设有单向离合器、圆盘型的轴向离合器和带有安全装置的摇手柄。
The winch drives and equipped with one-way brake, disc type axial friction clutch
and manual hoisting crank with safety device.
1-8 本产品根据海安会决议 MSC.81(70)由船级社进行检验和试验。
The inspections and tests of davit appliances are in accordance with the IMO
Resolutions MSC81(70).
1-9 证书 Certificate:ABS
SHEET 5 OF 5
V≥2×S=1.96 m/s
起艇速度 Hoisting speed of boat: ≥5.0m/min(救生 life)
≥18m/min(救助 rescue)
设计工况 Designed condition: 横倾 200+纵倾 100 Heel 200+Trim100
钢丝绳规格 Boat falls: dia:18×19-24-1770 镀锌,防旋转,最小破断负荷:334KN
Galvnized and non-twist, min breaking load 334KN
( 提 供 有 ABS 认 可 的 CCS 证 书 Supply CCS certificate by ABS
approved)
电动机 Motor(德州)
电源 power source: 440V/60Hz,3 phase
型号 model: YZ180L-6-H(救生 life) YZ250M-4/16-H(救助 rescue)
功率 output: 18.5 KW (救生 life) 46/22 KW (救助 rescue)
防护等级 Protection grade: IP56
绝缘等级 Insulation class: F
带电缆填料函 Cable gland
带加热器 Space heater
遥控方式 Remote control method:⒈艇内 In boat ⒉ 艇机 Winch
标牌 Indication plate:
文字要求 Language: 中英文 Chinese and English
材料要求 Material: 不锈钢 Stainless
重量 Weight: 吊艇架 davit-----~ 6500kg/付
绞车 winch-----~2950kg/台(救生 life) 3800kg/台 (救助 rescue)
SHEET 6 OF 5
1 船套包括 1shipset consist of:
4 付 4 sets 完整的吊艇架 A complete set of davit
2 付 2sets 救生艇绞车 lifeboat winch
(左右各一 one portside & one starboard)
2 付 1sets 救助艇绞车 rescue boat winch
(左右各一 one portside & one starboard)
8 只 8sets 艇架限位开关 limited switch on davit
4 只 4sets 绞车限位开关 limited switch on winch
2 付 2sets 救生艇绞车电控箱 electric control box for life winch
2 付 2sets 救助艇绞车电控箱 electric control box for rescue winch
2 只 2sets 救生艇绞车遥控控制按钮及电缆 button for life winch and gland
2 只 2sets 救助艇绞车遥控控制按钮及电缆
button for rescue winch and gland
4 套 4sets 绞 车 及 电 控 备 件 ( 满 足 CCS 要 求 ABS 认 可 ) Spare part for
winch & electric ( satisfied with the CCS requirement and ABS
approval)
-----------固艇装置、系艇装置 Gripe lashing and fastening unit
-----------遥控装置 Remote control device
-----------滑道、艇支撑 Skid and boat support
-----------电气备件 Spare parts for electric part(主要电气元件为施耐德)
-----------操作指示牌 Indicating plate
-----------支撑横杆 Strut
-----------所有必需的绳索 All necessary rope
-----------救助艇回收装置 Recovery unit for rescue boat
-----------绞车底座 Winch base
-----------主钢丝绳 Main wire rope
SHEET 7 OF 5
6. 油漆 Paint
6.1 除锈等级 Sandblasting to: Sa2.5
6.2 底漆 Primer painting:
702 环氧富锌底漆 702 zinc epoxy prime 2×30μ
6.3 面漆 Finish painting: 白色 White
SHEET 8 OF 5