Professional Documents
Culture Documents
Group Member: 1) Abdul Basit Id# 13684 2) FAYAZ - ULLAH ID#13854 3) Hamza Ishaq Id#13748 4) SHER DARAZ ID#13976 Title: Infrared Remote Tester LCA Project Teacher Name: Engr. Bushra Tahir
Group Member: 1) Abdul Basit Id# 13684 2) FAYAZ - ULLAH ID#13854 3) Hamza Ishaq Id#13748 4) SHER DARAZ ID#13976 Title: Infrared Remote Tester LCA Project Teacher Name: Engr. Bushra Tahir
Group Member: 1) Abdul Basit Id# 13684 2) FAYAZ - ULLAH ID#13854 3) Hamza Ishaq Id#13748 4) SHER DARAZ ID#13976 Title: Infrared Remote Tester LCA Project Teacher Name: Engr. Bushra Tahir
TITLE:
LCA Project
Teacher name:
1
Infrared remote tester:
Introduction:
The aim of this project is to design a circuit such that one can control home
or industrial appliances using the help of remote.
Using remote to control appliances reduces human efforts and also it saves
time.
The circuit can be operated up to a distance of 2-4 meters depending upon
the remote which we are using.
Abstract:
This is a simple remote tester circuit based on infrared sensor IC TSOP 1738.
When the IR waves fall on the sensor it output changes to low state. This makes the
transistor Q1 ON and LED will blink according to the code contained in the signal.
So for press of each button the LED blinks in different ways. This is a good
indication of the working of remote.
Component used:
1) IR receiver (TSOP)
2) BC557 Transistor
3) 10uf capacitor
4) 1k, 330 ohm resistor
Circuit diagram:
2
Conclusion:
In this project we conclude that using remote tester we can
see light blink which detect the remote signals.