Professional Documents
Culture Documents
r3 - Staad Adavanced Method Iricen
r3 - Staad Adavanced Method Iricen
r3 - Staad Adavanced Method Iricen
Now you are seeing the welcome screen of the STAAD.pro Connect Edition,
Workflows:
1. Geometry creation
2. Creating Properties and assigning to the members
3. Creating supports
4. Creating Loadings and definitions
5. Conveying STAAD to run the analysis
6. Designing Concrete or Steel
7. Generating Reports
0, 0
5, 0
9, 0
14, 0
20, 0
0, 6
0, 12
5, 6
9, 6
14, 6
20, 6
0, 12
5, 12
9, 12,
14, 12,
20, 12.
Node to Node Distance:
1. Go to Utilities
2. Select Node Tools
3. Then Node to node distance
4. For deactivate it back select remove node to node distance.
MIRROR --------------- ROTATE
GEOMETRY ------------- TRANSLATION-------Y--------3M-----------------LINK STEPS
Steps to go – STAAD Editor (one of the geometry method)
Also we use this editor when there is huge modification is required.
CLOSE AND SAVE
SELECT ALL MEMBERS =====GEOMETRY =============== LINK
REPEAT===========Z==============8==========LINK SLIP===== OK
SELECT END NODES AND GEOMETRY =========== TRANSLATIONAL REPEAT ===== Z ==== 1.5====
LINK STEPS====== OK
SELECT END NODES AND GEOMETRY =========== TRANSLATIONAL REPEAT ===== Z ==== 1.5====
LINK STEPS====== OK
FRONT VIEW ===========SELECT ALL ============ GEOMETRY =========== TRANSLATIONAL
REPEAT ======== Y======== -3===== LINK STEPS===========OK.
Front view =============== select first floor beams==============
geometry========translational repeat============= Z ===DEFAULT SPACING STEPS=== 3===
5 STEPS============LINK STEPS===== OK
Below are the sample model which has generated using Structures Wizard.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
In Geometry -> On right side dialog box select define tool to create cross section.
Use easy way to select your Beams like
1. Go to Select from the Ribbon and Take Parallel X & Z axis from the Beam
palette.
After creating Beam & Column, Should assign those properties to available
member on screen.