Professional Documents
Culture Documents
002 Beam Clamp
002 Beam Clamp
002 Beam Clamp
________________________________________________
EXAMINATION OF BEAM CLAMPS
1.0 Purpose
To define the procedural requirements for Examination of Beam clamps in accordance with
BS EN 13155:2003
2.0 Scope
To specify the internal procedures to certify of test and through examination of Beam Clamps
3.0 Definition
--
4.0 Responsibility
5.1. General
Check identification and SWL is clearly marked on the Beam clamp. Then compare these
markings against the current certificate.
Examine test certificate for correct detailing, and calculate the load requirement for the
proof load test.
For proof load requirement : SWL x 2
If any observations are found unsatisfactory, then the Beam clamp is met with the
non acceptance criteria.
7.0 Bibliography