Professional Documents
Culture Documents
Pro Micro 16 MHZV 2
Pro Micro 16 MHZV 2
Pro Micro 16 MHZV 2
Power
ADC
PWM
Pro Micro (Dev-12640)
16MHz/5V
GND Serial
Arduino PC Interrupt
Port Misc
The Arduino IDE renders all PWM pins as 8-bit
J1
MicroB
Connects VCC to USB
(bypasses regulator)
ATmega32U4 LEDs
Power
Built in USB 2.0
RAW: 6V-16V Absolute maxiumum VCC: 6V Power: Red
Maximum current for chip: 200mA
VCC: 5V at 500mA Maximum current per pin: 40mA RX: Yellow
Recommended current per pin:20mA
TX: Green
8-bit Atmel AVR
Flash Program Memory: 32kB
USB EEPROM: 1kB
Internal SRAM 2.5kB
HID enabled Serial
ADC:10-bit
PWM:8bit Use Serial for the USB connection
VID: 0x1B4F
High Speed PWM with programmable
PID: 0x9205 (bootloader); 0x9206 (sketch) resolution from 2-11 bits Use Serial1 for the hardware serial connection