Professional Documents
Culture Documents
Concept: Routing Cables
Concept: Routing Cables
Concept: Routing Cables
Within the Route cables dialog box, you can then click New Cable to begin routing cables.
The following options are available in the Route cables dialog box:
• Cables/Wires selection area – Along the left side of the dialog box, this area enables you to view which
cables and conductors are being routed.
• From reference – The connector coordinate system from which the cable is routed.
• Route Type – Defines the method type used to route the specified cable, including Simple Route and
Follow Cable.
The routing methods for cables are very similar to that of routing wires. By default, the cable jacket routes the
entire length between connectors along with the conductors.
http://precisionlms.ecorp.cat.com/precisionlms/standard-content/coach_cp_6697620f-... 25-10-2017
Routing Cables Page 2 of 2
You can also right-click and select Allow Location, which enables you to select previously established
location points while routing cables.
http://precisionlms.ecorp.cat.com/precisionlms/standard-content/coach_cp_6697620f-... 25-10-2017