Professional Documents
Culture Documents
Deleting Wires and Segments
Deleting Wires and Segments
• Delete location points – You can delete location points from wires by clicking Remove Locations
from the Locations group.
◦ ItemsFromLocs – Enables you to remove multiple items from multiple location points. You can
remove location points from multiple wires or cables. You specify from which wire or wires you
want the selected location points deleted.
• Delete portions of wires – You can delete a portion of wire or cable by clicking the Route group drop-
down menu and selecting Delete Cable Portion.
You can select two location points between which the cable segments are deleted. If more than one
wire shares the location points, you can specify which wires have their portions deleted. In Figure 1,
http://precisionlms.ecorp.cat.com/precisionlms/standard-content/coach_cp_6697620f-... 25-10-2017
Deleting Wires and Segments Page 2 of 2
and delete it. The locations are deleted, but the wire feature remains in the model tree as a broken wire.
To delete the entire wire, select it in the model tree and delete it. This also causes locations to be
automatically deleted.
• Select the broken wire in the model tree, right-click, and select Route.
• In the ribbon, click Route Cables from the Route group and click Find . The system locates all
broken wires and enables you to reroute them.
http://precisionlms.ecorp.cat.com/precisionlms/standard-content/coach_cp_6697620f-... 25-10-2017