Professional Documents
Culture Documents
Member Definition - Parameters: 1.1.1.1.1. Help
Member Definition - Parameters: 1.1.1.1.1. Help
Member Definition - Parameters: 1.1.1.1.1. Help
EN1992-1-1
By:
1.1.1.1.1. Help
SHARE
ADD TO COLLECTION
Use this option to define the code parameters of a member type. There are two ways to access this option:
• Click the New Bar Type option located in the Member Type dialog
• Click the Parameters button located in the Definition dialog.
The following dialog displays:
The member type field displays the name of the selected member type (enter the name of the defined bar
type). The Buckling with respect to axis Y or Z fields displays the length of the bar for the appropriate
plane.
The member buckling length coefficients (in both directions) are defined in the Buckling Length
coefficient field. The actual length of a member (or, the sum of the component element lengths) is
automatically entered in the appropriate fields.
The buckling length coefficient depends on the support conditions of the member end nodes in the
buckling plane. The buckling length of a member is also defined in the Buckling Patterns dialog, which is
opened by clicking the icon that represents the selected member-buckling model. After selecting a typical
member support pattern, the coefficient value will be calculated automatically.
• The first group contains typical (code) methods of member support and the corresponding buckling
coefficient values.
-----------------------------------------------------------------------------------------------------------------------------------------------
Công ty TNHH MTV Tư vấn và xây dựng A.S.P.T
Web.: www.aspt.vn, Email: thanhkcdn@gmail.com, Tel: 0236.3.624696