Professional Documents
Culture Documents
Boq
Boq
Fabrication works
MS frame & door for fire exit in 2" x 2" L angle
1 Front façade Nos 1.00
for frame and square box section.
MS loft inside kitchen area in 4" x 2" and 3" x
2 Kitchen Nos 1.00
1.5" C channel
3 Bracket for cable tray in MS Nos 37.00
Main Prototype frame IN ms 20MM DIA pipe
4 FOH area Nos 4.00
finished in Duco Paint
Additional pipes for prototype MS round pipes
5 FOH area Nos 3.00
finished in Duco Paint
SS jacketing for cone holders on back wall
6 FOH area Nos 3.00
wooden shelve. (BIG)
SS jacketing for cone holders on round disk on
7 FOH area Nos 15.00
MS prototype frame. (SMALL)
Menu display box for outside with 6mm thick
8 extra clear glass + satin finish spray paint with Façade Nos 1.00
duco base / lambi.
Carpentry works
ELECTRICAL WORKS
FIXTURES
1 Globe lamps FOH area Nos 5.00
2 Liner light fixture 1200mm FOH area Nos 8.00
3 Liner light fixture 600mm FOH area Nos 12.00
4 Ceiling recessed spot light Façade Nos 6.00
Led strip light behind
5 the letters + menu display box outside in Façade Rmt 11.00
aluminum profile
Surface mounted adjustable
6 FOH area Nos 37.00
spot light
7 Kitchen led light Kitchen Nos 8.00
8 Track for spot light RMT 5.00
9 Acrylic globe Nos 2.00
10 Exhausht fan for kitchen Nos 1.00
Total D amount for fixtures
PAINTING WORKS
Providing and applying royal
1 FOH Area SQFT 1,282.99
paint on walls and ceiling
2 Wall texture as approved asain paints shade FOH Area SQFT 377.02
3 Providing and applying black enamle paint FOH Area SQFT 386.12
Providing and applying duco
4 FOH Area SQFT 141.57
paint
5 Providing and applying duco paint FOH Area RFT 546.29
Providing and applying matt melamine polish
6 SQFT 17.24
on wood
Providing and applying matt melamine polish
7 RFT 48.72
on dhar and moulding
8 Chair polish Nos 9.00
Redoxide coating on the exsisting I beams and
9 Nos 1.00
new loft sections
Miscellaneous Works
Signages as per approved
1 Façade Nos 1.00
on mail
2 Spin wheel Nos 1.00
Vinly sticker for spin wheel
3 Nos 4.00
and dustbin inside as well as outside
4 Neon signage as per approved rate Nos 1.00
Providing and fixing of aluminum milk can as
5 per design detail and applying black matt paint Nos 1.00
over the same
6 Mathadi union association Nos 1.00
a 20 mm dia NB Rmt 0
b 25 mm dia NB Rmt 0
DRAINAGE SYSTEM (SOIL , RAIN WATER & WASTE WATER
PIPING)
6 Fixing, testing & commissoning 6 kg/ sq. cm PVC Pipe ISI
marked brand as per IS 4985 complete with PVC Fittings conforms
to IS: 7834 / IS: 10124 including all fittings (plain or door) e.g.
bend, single tee, double tee, single Y, double Y, junction, offsets,
acess pieces etc. The work including solvent jointing hydraulic
testing the joints & pipes for as mention in the sepcification etc.
making holes incuding chasing in solid block masonary walls with
groove cuttting machine to required width and depth, making bores
in wall in CC or CM 1:3 as applicable clearing the debris, grouting 0
of concealed pipes, making good the chase by using 1:1 cement
mortar, brackets / support for fixing pipes and making good the wall
and floors, making connection with downtake to satisfaction of engr
/ arch with proper care, protecting fittings & pipes till the final
handing over etc as directed by E-I-C complete as per
specifications (Internal work)
a 40 mm dia OD Rmt
b 50 mm dia OD Rmt 2.5
c 75 mm dia OD Rmt 17.3
d 100 mm dia OD Rmt 1.5
7 Providing & fixing PVC Nahani trap of self cleansing design
a 110 mm inlet and 75 mm outlet No 4
8 Suppying, installing, testing and commissioing of centrifugal
submersible monoset pumps with S.S. casing, Bronze impeller, SS
Shaft and driven by 415 V AC, 3 phase, 50HZ., motor running at
2900 rpm speed and shall be supplied with all accessories viz.,
strainer, base plate, coupling, lift hook, chain, starter panel, cabling
up to panel, earthing,and delevery pipes & valves etc., complete.
Vertical Submersible Pumps , MOC SS 304.(U.G.Tank To All O.H.
Tank)
Ltr