Professional Documents
Culture Documents
A04 Fabia Symphony CarRadio PDF
A04 Fabia Symphony CarRadio PDF
Table of Contents
CD operation 10
Guarantee 18
GENERAL VIEW
7 21 20 22 23 11 7 10
TP
FM1 4
12 8 2 9 3 13 1 4 5 6
2
3. Bed. Anl. Skoda Radio Engl. 13.12.2004 14:20 Uhr Seite 3
3
3. Bed. Anl. Skoda Radio Engl. 13.12.2004 14:20 Uhr Seite 4
Important Information
Operating the radio Comfort radio coding
while driving
Caution!!! • If during the drive you are unclear If you did not receive any appliance-
When driving a vehicle, always about functions in the car radio or if specific security code, your vehicle is
remember that your concentration unexpected effects set in, check these equipped with a comfort coding
should be focussed on the road when the vehicle is stationary and refer system for which you do not require
traffic!!! to the instruction manual if necessary. any code. If disconnecting and
reconnecting the battery, first switch
• Select a volume which allows acoustic
Modern road traffic always requires the on the ignition with the key in the igni-
sounds from outside to be heard in the
full concentration of the traffic partici- tion switch and only then turn on the
vehicle at all times.
pants. radio. If you nevertheless still wish to
have the code, please ask your Skoda
The extensive equipment details in Dealer.
modern car radios offer not only enter- Comfort radio coding
tainment but also a variety of information The code number should not be kept
• Your car radio is equipped with an in the vehicle but left in a safe place at
about the traffic situation, weather condi-
appliance-specific security code. The home.
tions etc.
security code need only be entered
Please remember only to operate the when the radio is used for the first time Since the appliance is only able to func-
car radio when the traffic situation in the vehicle. After the first input of the tion if the correct code is entered, it is
really permits. code number, the radio "gets to know” useless after theft and therefore protec-
Please observe the following instruc- its vehicle. Accordingly, it is not neces- ted against theft.
tions!!! sary to enter the code number after an When the appliance is turned off and the
interruption of vehicle voltage either. ignition is switched off, a flashing LED
• Familiarise yourself with the extensive The radio automatically checks the
functions in your car radio before start- located in button indicates anti-theft
vehicle’s data when turned on after the protection.
ing to drive and refer to the instruction ignition has been switched on. It is only
manual when necessary. necessary to enter the code number if
• The more complicated settings, e.g. it becomes apparent that the radio is in
those in the set-up menu which are another vehicle.
usually only necessary once or rarely,
should be done while the vehicle is still
stationary before you start to drive.
4
3. Bed. Anl. Skoda Radio Engl. 13.12.2004 14:20 Uhr Seite 5
General functions
Turning on and off Sound setting Geometry
Volume control
Setting the sound Geometry (balance and fader)
You can set the sound tone of the radio to You can set the geometry of the sound tone
suit your requirements. Please note that to suit your requirements.
the radio receiver, CD player, CD changer, Proceed as follows:
TIM playback and telephone allow sepa-
Balance:
rate settings and storing.
• Press the GEO button .
Proceed as follows: The indication BAL appears in the display
Bass setting: with the current scale value.
• Use the control to set the required
• Press the AUD button . The indication
2 3 1 BASS appears in the display with the balance setting from LEFT 9 via CENTER
current scale value. to RIGHT 9.
Turning on and off Fader:
By pressing the button you switch the • Use the control to set the required
bass setting from -9 to +9. • By pressing the GEO button again (if
radio on and off. When switched on, the you wish to select fader control from nor-
appliance assumes the parameters last Treble setting: mal operation, you must press button
heard for treble, bass, balance etc. Only the twice), you go to fader control. The indica-
radio volume may be reduced to the • Press the AUD button (if you wish to
select treble regulation from normal op- tion FAD appears in the display with the
maximum volume in the set-up menu when current scale value.
the radio is turned on. eration, press button twice to go to the
treble setting. The indication TRE • Use the control to set the required fader
Volume control appears in the display with the current setting from REAR 9 via CENTER to
When on, the on / off button sticks out of scale value. FRONT 9.
the front, which makes it possible to set the 5 seconds after the last setting or when
• Use the control to set the required
volume. treble setting from -9 to +9. the button is pressed again, the car
radio switches over automatically to normal
Turn the button to the right or left to set 5 seconds after the last setting or when operation and stores the set values.
the required volume. the button is pressed again, the car
radio switches back to normal operation
and stores the set values.
5
3. Bed. Anl. Skoda Radio Engl. 13.12.2004 14:20 Uhr Seite 6
Radio operation
Switching range
6
3. Bed. Anl. Skoda Radio Engl. 13.12.2004 14:20 Uhr Seite 7
Radio operation
Program selection Storing
Radio operation
TIM Function
(Traffic Information Memory)
2-hour recording Traffic announcements played back
TP 20 chronologically
If the TP range was selected before the
FM1 4
appliance was switched off, all following When the AIM button is pressed, the
traffic announcements are recorded auto- most recent report is played back. The
matically in the next two hours. This is brief- recording number and the time of the re-
ly indicated in the display by the message spective report are shown in the display, for
"TIM 2 h ". example "TIM 3 15:05". In this way all stored
reports are played back one after another.
Recording for 24 hours
13 By pressing the AIM button when the By pressing the AIM button again, the
appliance is switched off, a 24-hour record- appliance is switched back to the original
ing mode is activated. The last heard pro- state.
With the TIM Function, up to 9 traffic anno- gram and "TIM 24 h" are briefly indicated in Repeating the traffic report
uncements with a total length of a maxi- the display. If the last heard program was
mum 4 minutes are automatically not a TP program, a TP program is set If the control button is pressed once
automatically. during the TIM playback, the current traffic
stored by means of a built-in memory.
report is repeated.
The recording is automatic if the set pro- Information:
gram transmits traffic broadcasts (recognisa- Traffic announcements played back in
• If the memory is full, the next report is any sequence
ble by the indication "TP" in the display).
recorded over the first recorded report.
Standby Recording Press the control button briefly twice
• If a traffic report is longer than 4 minutes, during the TIM playback. Now by pressing
Standby recordings take place when the it starts to record over the beginning of the the control button or you can
appliance is switched OFF for a limited report recording. switch up and down between the recorded
time. reports.
• If the radio is switched on during the
These recordings are deleted 6 hours after recording of a report, the recording is
Fast forward and backward winding
the time has run down. Switching on the stopped.
appliance ends the readiness to record. Keep the control button or
depressed until the required point is found
in the report.
8
3. Bed. Anl. Skoda Radio Engl. 13.12.2004 14:20 Uhr Seite 9
Radio operation
RDS functions
RDS, (Radio Data System) makes it pos- General Information Traffic Broadcast Code (TP Code = Traffic
sible to show the name of the program Program):
In unfavourable conditions, e.g. on moun-
received 23 .
tainous stretches, the appliance checks Code for a radio traffic service station.
During the drive RDS automatically as- alternative frequencies very often. This Announcement Code (TA =Traffic
sumes the function of seeking and if may cause momentary muting. Announcement):
necessary setting alternative frequencies
for the set program to ensure the best Mode of operation of RDS With the TA Code, the appliance recog-
possible reception within a transmitting In addition to the normal radio signal, an nises a radio traffic service announce-
range even under unfavourable condi- inaudible digital flow of data is sent with ment. If necessary, the volume of the
tions 23 . RDS. This flow contains among other appliance is raised and the CD operation
things the following data: interrupted.
Storing RDS Programs
Program identification (PI Code): Music / Speech switchover (MS Code)
When storing RDS programs, the corre-
sponding station button must not be With the PI code, the radio recognises the For spoken programs the MS code
pressed until its program name is shown program just received. switches the frequency to good speech
in the display. This ensures to a large intelligibility.
Program Service Name (PS code):
extent that all RDS data can be evaluated Catastrophe reports
and stored if required. The PS code transmits the name which is (RDS Code designation =PTY 31)
to be shown in the display
23 .
Take care also that no "scroll text” is Catastrophe reports have priority above
shown in the display when storing as this The PS code is used by some programs all other functions.
will be stored instead of the program to transmit additional information which is
name then. shown in the display. EON (Enhanced information concerning
Other Networks),
When a stored RDS program is called up, Alternative frequencies (AF List):
the corresponding program name appears Programs which use EON take over traffic
A program is normally transmitted from announcements from other programs.
23 in the display. If the reception of the
several broadcasting stations on different During a report the name of the other pro-
stored frequency is not good, the appli-
ance automatically selects an alternative
frequencies. The AF list contains the fre- gram is shown 23 in the display.
quencies which this receiver can set for
frequency (best station function) of the
this program.
same program.
9
3. Bed. Anl. Skoda Radio Engl. 13.12.2004 14:20 Uhr Seite 10
CD operation
Playback Scan Radio CD operation
Title selection Shuffle (Random generator) CD Ejection
Switching over to radio operation
4 Press the A/F
or TP button to switch to
11
radio operation. The CD is not ejected then.
CD Playback is restarted by briefly pressing
12 the CD button again.
6 CD Ejection
8 By depressing the CD button for a few
moments, the CD is ejected and, depending
on the setting, switched to radio operation.
If the CD is not taken out, this will be drawn
9 5 back into the CD shaft after a few seconds.
Playback Scan CD operation and Radio traffic service
If the radio was operated in TP mode before
Push a CD (label upwards) carefully in the When the SCN button is pressed, all titles
switching to CD operation, the traffic
CD tray until it is automatically drawn in in the CD are played for ca. 10 sec. one after
announcements will interrupt the CD playback
further. Playback begins automatically. PLAY another. The function is indicated in the
and switch over to radio operation for the
CD TR y (y=track number) appears in the display by SCAN CD TR y. Press the SCN
duration of the report. Once the traffic
display. button again and the compact disc player
announcements are over, the car radio will
Title selection returns to normal operation.
switch automatically to CD operation again.
Pressing the control button or moves Temperature-related disconnection
forwards or backwards to the next track. Shuffle (random generator)
If the temperature in the car radio exceeds
Fast forwards and reverse Press the button AS and the CD titles are
85 °C, a safety disconnection mechanism
sequenced at random. The function is indica-
This function makes it possible for you, by switches off the CD player. As soon as the
ted in the display by SHFFL CD TR y. Press
listening in to the fast forwards and reverse, temperature drops below 85 °C, the compact
the AS button again and the CD player
to search for a particular point within a song. disc player is activated again.
returns to normal operation.
Keep the control button or Tips on handling CDs
depressed until the respective point is found. • CDs are very sensitive to scratching. For
that reason do not leave CDs lying around
in your vehicle without protection. Keep the
CDs exclusively in special boxes.
10
3. Bed. Anl. Skoda Radio Engl. 13.12.2004 14:20 Uhr Seite 11
CD operation
CD Changer operation Title selection
• CDs should not be exposed to tempera- Title selection Switching over to radio operation
tures over 50 °C for lengthy times. Pressing the control button or moves By pressing the A/F
or TP button, you
Remember that temperatures inside the forwards or backwards to the next title. switch to radio operation.
vehicle in sunshine can be much higher Fast forward and reverse Other display reports in CD Operation:
than outside the vehicle. For this reason NO DISC:
This function makes it possible for you, by
avoid exposing CDs to direct solar radia-
listening in to the fast forwards and reverse, No CD magazine or empty CD magazine
tion. to search for a particular point in a song. in the CD changer.
CD Changer operation (optional) Keep the control button or CD X NO DISC:
In addition to the integrated CD drive there is depressed until the respective point is found.
No CD in the selected CD compartment x.
also the possibility of operating an external Scan CHK MAGAZINE:
SKODA CD changer with your CD radio. By pressing the SCN button , all titles in CD changer is checking the CD magazine
Prerequisite for the CD changer operation is the CD are played for ca. 10 sec. one after and is not ready for operation yet. Playback
that there is a magazine filled with CDs in the another. The function is indicated in the dis- is automatic when the checking procedure is
CD changer. See the enclosed CD changer play by SCAN CD TR y. By pressing the SCN over.
manual for the necessary operating steps. button again, the CD changer returns to NO CD MAGAZINE:
The following functions are available for your normal operation
CD changer: There is no CD magazine in the CD changer.
Shuffle (random generator)
Playback
By pressing the button AS , the titles of the
Press the CD button . The appliance now CD are played in random sequence. The
plays the CD last heard. Playback is indica- function is indicated in the display by SHFFL
ted in the display by PLAY CD x TR y (x =CD CDxTR y. Depending on the setting in the
number in the CD changer, y =track number). set-up menu, the shuffle function refers to the
CD Selection current CD only or to all CDs in the maga-
By pressing a station button, one to six , zine. When the AS button is pressed
the corresponding CD will be played back again, the CD player returns to normal
again. The CD in the integrated CD drive is operation.
selected by pressing the CD button .
11
3. Bed. Anl. Skoda Radio Engl. 13.12.2004 14:20 Uhr Seite 12
Set-up menu
6 Caution:
Changes in the set-up menu affect
the general mode of operation of
your car radio and for safety rea- 1
sons should only be made when
the vehicle is stationary!!!
5
By depressing the TP button for a few • PHONE IN utilisation of the tele-
moments, you can enter the set-up The following functions can be set in the phone entry
menu. This is for special settings, as for set-up menu: • PH VOL volume of telephone
example operating the car radio in call
• GALA speed-dependent
connection with a telephone.
volume adjustment • TA VOL minimum volume of
The individual menu points are selected • ON VOL maximum volume traffic announce-
by pressing the TP button or the con- when on ments
trol button , . Changes in the
• LED Warning LED on / off • CD SFL random playback for
menu points are registered
CD changer
acoustically by a signal tone unless you • BEEP Beep tone on / off
have turned this function off in the set-up • KEY ignition key logic
• AUTO REG Regional stations
menu. • LOUD loudness off / on
on / off
Alterations in the menu point are made • M/S Music / Speech • MONO compulsory mono
with the aid of the turning knob and changeover • LOCAL local / remote recep-
stored when changing to the next menu
tion for search
point.
12
3. Bed. Anl. Skoda Radio Engl. 13.12.2004 14:20 Uhr Seite 13
Set-up menu
GALA However if it exceeds the volume set in the indicated value and go to the next
As the driving speed increases, the sound the menu, it is reduced to the set value. menu point
level rises in the vehicle. With the aid of • Select ON VOL in the menu. "ON VOL” or
the GALA function (speed-dependant appears in the display with the current • by depressing the TP button for a few
volume adjustment) the volume of the car value. moments, you can leave the set-up
radio becomes louder as the speed • Use the turning knob to set the de- menu without storing this change.
increases. The extent of the rise in vol- sired value from 1 to 45. BEEP
ume can be selected by setting from 1 to • By briefly pressing the TP button or
9. If set to NO, the GALA function is In this menu point, you can decide if you
the control button , you can store wish to continue to have an audible signal
turned OFF. the indicated value and go to the next in the set-up menu and e.g. when storing
• Select GALA in the menu. "GALA" is menu point programs.
shown in the display with the current or
value. • Select BEEP in the menu. "BEEP” is
• by depressing the TP button for a few shown in the display with the current
• Use the turning knob to set the de- moments, you can leave the set-up value.
sired value from NO to 9. menu without storing this change. • Use the turning knob to set ON or
• By briefly pressing the TP button or LED OFF.
the control button , you can store
This point is for setting whether the warn- • By briefly pressing the TP button or
the indicated value and go to the next
ing LED should blink when turned off in the control button , you can store
menu point
conjunction with the absence of the the indicated value and go to the next
or ignition key (indicated by "ON” ) or should menu point
• by depressing the TP button for a few be turned off (indicated by "OFF”). or
moments, you can leave the set-up • Select LED in the menu. "LED” is shown • by depressing the TP button for a few
menu without storing the change. in the display with the current value. moments, you can leave the set-up
• Use the turning knob to set ON or menu without storing this change.
ON VOL OFF.
Set the maximum ON volume in this menu • By briefly pressing the TP button or
point. Normally, the last heard volume is the control button , you can store
set when the radio is switched on.
13
3. Bed. Anl. Skoda Radio Engl. 13.12.2004 14:20 Uhr Seite 14
Set-up menu
AUTO-REG / REG OFF • Select AUTO-REG / REG OFF in the • by depressing the TP button for a few
In this menu point you can set the switch- menu. The current value "AUTO-REG / moments, you can leave the set-up
over to alternative frequencies of regional REG OFF" is shown in the display. menu without storing this change.
stations. The setting causes the following • Use the turning knob to set AUTO- PHONE
function: REG or REG OFF. Enter this menu point if your vehicle is
If during the drive the quality of the recep- • By briefly pressing the TP button or equipped with a telephone and modify the
tion of the set program gets worse, your the control button , you can store radio functions under this menu point to
radio first sets alternative frequencies only the indicated value and go to the next suit your telephone as in the following.
of the program you are currently listening menu point no: No telephone fitted into the vehicle.
to. or ON: There is a telephone fitted into the
If there is a risk of "station loss”, your • by depressing the TP button for a few vehicle. With this setting, the radio is
appliance will resort to frequencies of a moments, you can leave the set-up muted when the telephone is activa-
related program. menu without storing this change. ted by a telephone call or when dial-
For example the 1st station of NDR M/S led.
Schleswig Holstein (NDR 1 SH), Hamburg in: The built-in telephone is connected to
With the aid of this function, you can set
(NDR 1 HH) and Lower Saxony (NDR 1, the radio by means of a corresponding
whether or not there should be an auto-
NDS) with regional programmes of differ- hands-free speaking unit, so that the
matic switchover between optimum repro-
ent content. person calling/called can be heard
duction for music and speech with the aid
As these programs sometimes transmit of the RDS Signal. through the car speakers.
different regional programs, a change of • Select PHONE in the menu. The display
• Select M/S in the menu. The display
frequency may change the radio program. shows "PHONE” with the current value.
shows "M/S” with the current value.
With the "AUTO-REG” function, (autono- • Use the turning knob to set the
• Set ON or OFF with the aid of the turn-
mous regional programs) there is only a appropriate function.
ing knob¨.
switchover to regional programs in an
• By briefly pressing the TP button or • By briefly pressing the TP button or
emergency.
the control button , you can store the control button , you can store
The "REG OFF" setting allows unlimited the indicated value and go to the next
the indicated value and go to the next
switching between "related” regional pro- menu point.
menu point
grams.
or
14
3. Bed. Anl. Skoda Radio Engl. 13.12.2004 14:20 Uhr Seite 15
Set-up menu
Set-up menu
• by depressing the TP button for a few MONO • Use the turning knob to set ON or
moments, you can leave the set-up This menu point is for changing your OFF.
menu without storing this change. appliance to mono operation. The change- • By briefly pressing the TP button or
LOUD over to mono operation can improve the the control button , you can store
The human ear cannot hear extremely reception quality, especially in bad the indicated value and go to the next
high or low frequencies as well as the fre- weather. menu point
quencies in the middle of the hearing • Select MONO in the menu. The display or
range. shows "MONO ”with the current value. • by depressing the TP button for a few
The loudness function raises the volume • Use the turning knob to set the com- moments, you can leave the set-up
of the lower and higher frequencies some- pulsory mono operation (ON) or (OFF). menu without storing this change.
what to balance out this weakness, espe- • By briefly pressing the TP button or The radio appliance leaves the set-up
cially when listening to quieter music. the control button , you can store menu after 30 sec. if no changes have
• Select LOUD in the menu. The display the indicated value and go to the next been made over this time.
shows "LOUD” with the current value. menu point
• Use the turning knob to set the or
loudness function (ON) or (OFF). • by depressing theTP button for a few
• By briefly pressing the TP button or moments, you can leave the set-up
the control button , you can store menu without storing this change.
the indicated value and go to the next LOC
menu point
This menu point is for deciding whether
or the search function should only seek
• by depressing the TP button for a few strong reception stations (LOC ON ) or if
moments, you can leave the set-up weak reception stations (LOC OFF)
menu without storing this change. should be taken into account too.
• Select LOC in the menu. The display
shows "LOC” with the current value.
16
3. Bed. Anl. Skoda Radio Engl. 13.12.2004 14:20 Uhr Seite 17
Security code
Guarantee
Guarantee
The same guarantee terms apply to our
car radio appliances as do to new
vehicles.
The guarantee does not cover damage
caused by incorrect handling of the appli-
ance or unprofessional attempts at
repairs or cases where there is external
damage.
18
3. Bed. Anl. Skoda Radio Engl. 13.12.2004 14:20 Uhr Seite 19
19
3. Bed. Anl. Skoda Radio Engl. 13.12.2004 14:20 Uhr Seite 20
Key-word Index
C M T
Catastrophe announcements . . . . . . . .9 Manual search . . . . . . . . . . . . . . . . . . .7 TA code . . . . . . . . . . . . . . . . . . . . . . . .9
CD changer operation (optional) . . . . .11 Manual storing . . . . . . . . . . . . . . . . . .7 TIM . . . . . . . . . . . . . . . . . . . . . . . . . . .8
CD ejection . . . . . . . . . . . . . . . . . . . . .11 Music / Speech switchover . . . . . . .9,14 TP code . . . . . . . . . . . . . . . . . . . . . . .6
CD operation . . . . . . . . . . . . . . . . . . .10 MW . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Traffic announcement . . . . . . . . . . .6,8,9
Code number . . . . . . . . . . . . . . . . . . . .4 Treble setting . . . . . . . . . . . . . . . . . . .5
Coding . . . . . . . . . . . . . . . . . . . . . .4,17 O
Comfort coding . . . . . . . . . . . . . . . .4,17 Output power . . . . . . . . . . . . . . . . . .19 V
Connections. . . . . . . . . . . . . . . . . . . .19 Volume adjustment (ON VOL) . . . . . . 13
P
D PI code . . . . . . . . . . . . . . . . . . . . . . . .9
Display indications . . . . . . . . . . . . . .3,11 Playback (CD) . . . . . . . . . . . . . . . . . .10
Playback (radio traffic
F service recording) . . . . . . . . . . . . . . . . .8
Fader . . . . . . . . . . . . . . . . . . . . . . . . . .5 PS code . . . . . . . . . . . . . . . . . . . . . . .9
20
SIMPLY CLE VER