Professional Documents
Culture Documents
Cruiser Hks Specifications
Cruiser Hks Specifications
Cruiser Hks Specifications
CRUISER trikes come with a 15 sq. meter high performance double-surface wing that is
suited for local flying and cross country flying.
CRUISER trikes are available with options of instruments and accessories. They have wide
molded comfortable seats for both pilots and incorporate an easy-rigging folding mast
design. Front and rear suspension is provided by shock absorbers to ensure a comfortable
ride over rough ground.
Engine
HKS 700 E, 60 hp with TBO of 1000 hrs
Instruments
Altimeter, Air Speed Indicator, Vertical
Speed Indicator, Compass, HKS Tachometer,
Dual EGT and CHT gauges, Fuel gauge, Oil
Pressure gauge, Oil Temperature gauge,
Volt meter
Salient features
Cast aluminum wheels
Front and rear suspension
Rear brakes with Parking brake
Rear seat nose wheel steering
Wide composite seat with folding back rest
Foot and hand throttle with choke
Fuel tank mounted under seat
3-Blade Composite propeller
OTHER PRODUCTS
Wooden Propellers
Hang gliders from Airborne Australia
Paragliders from Fresh Breeze Germany
Paramotors from Fresh Breeze Germany
Paragliding winches
Trailers for Trikes
Flying Suits, Headsets, Helmets, Radio and
Intercom
FLIGHTSTAR AIRCRAFT
The Flightstar Aircraft manufactured in India and delivered ready to fly. The airframe components are all
aircraft specification aluminum and protected against corrosion.
The wing is streamlined strut braced with large diameter, tubular spars reinforced with double sleeves and
stainless bushings.
The custom airframe components are designed with wear life and maintenance in mind. They are machined
and finished to a very high standard.
The wing and control surfaces are covered with pre-sewn, pre-coloured Dacron, in a custom colour pattern
you get to choose. With the optional X-ply Mylar coverings, the wings and tails are easy to clean and give
long lasting performance without the cost and hassle of other systems.
The coverings are computer designed and cut to ensure proper fit. The covering sets have all the re-
enforcement patches sewn with openings for inspection. The quality control and assembly method we
employ produces unbelievably tight, attractive flight surfaces.
The cockpit cages and landing gear are made of 4130 chrome molly
steel, finished in black powder coat. The various brackets are
manufactured from stainless steel. The seats are padded and are
surprisingly comfortable.
The instrument panels are large and vibration isolated. The composite
fairings and enclosures come finished in a colour of your choice.
The nose wheel is directly steered from the rudder pedals and pivots
in large oilite bearings. The nose wheel fork utilizes pultruded glass
fiber fork rods for suspension.
The exhaust mount is a rubber isolated stainless assembly that clamps around the exhaust muffler
eliminating the cracking problems common in welded attachments. All fasteners used are either AN or MS
specification.
The 10 gallon fuel tanks are moulded for Flightstar in thick crosslink polyethylene. This allows the use of all
available automotive fuels without affect from oxygenated additives like Ethanol or MTBE.
Standard Equipment
STANDARD EQUIPMENT
• 60hp HKS 4 Stroke Air-cooled Engine
• Fully Enclosed Cabin W/Zippered Sport Doors
• High Lift Wing with Streamlined Struts
• Flightstar Wing quick fold System
• Durable Aluminium and Stainless Custom Hardware
• Full Dual Control System
• Anodized Airframe for Corrosion Protection
• 4 Point Pilot Restraint Harnesses
• Flight and engine management instruments
• In-Flight Adjustable Trim
• 3 Blade Composite Propeller
• Rear wheel Brakes
Flightstar IisII SC / Specifications
Specifications
Power Plant: