Professional Documents
Culture Documents
High Density Polyethylene Fusion Welded Waste System: Offer
High Density Polyethylene Fusion Welded Waste System: Offer
EXTREME TEMPERATURE
Resistance to intermittent discharges
at temperatures as high as 95°C.
High resistance to extremely rigid
temperatures as low as -40°C
Wide range of transition fittings for The diameter, the relative tolerances of the
COMPATIBILITY connection to other waste systems such as Valsir pipes in high density polyethylene
are indicated in the following table. These
cast iron, PE, PP, PVC.
values are in compliance with those set by
Valsir HDPE is extremely easy to use, it the standards currently in force.
offers numerous jointing methods and Nominal External Minimum and maximum
meets all installation requirements. diameter diameter average external
(mm) (mm) diameter(mm)
Valsir HDPE is used to construct drainage 32 32 32.0 32.0
systems for waste water and rainwater
in residential buildings and in collective 40 40 40.0 40.4
buildings such as offices, hotels, hospitals, 50 50 50.0 50.5
schools, police barracks, factories, sports 56 56 56.0 56.5
centers.
60 63 63.0 63.6
Its excellent resistance to UV light allows
DIMENSIONS 70 75 75.0 75.7
surface mounting both indoors and
90 90 90.0 90.9
outdoors.
100 110 110.0 111.0
INSTALLATION DIFFERENT METHOD CAN BE USED
125 125 125.0 126.2
FOR CONNECTION THE PIPES AND/OR
FITTINGS IN POLYETHYLENE: 150 160 160.0 161.5
info@solidtone.ph
solidtoneinnovations