Professional Documents
Culture Documents
Cummins KTA19-G4 Genset Spec Sheet
Cummins KTA19-G4 Genset Spec Sheet
Cummins KTA19-G4 Genset Spec Sheet
Cummins KTA19-G4
50Hz,400V
Engine
1
Fuel System Mode Cummins PT Direct Injection System
Speed Regulation Mode Electrical Speed
Engine Weight(dry-type Air cooling) kg 1855
Engine Weight(dry-type Water cooling) kg 2076
Inlet Flow- liter/sec 532(1126)
Exhaust Temperature- ℃ 538℃(1000)
Exhaust Quantity (liter/sec) 1434(3039)
Engine Heat Radiation – kw(BTU/min) 64(3654)
Cooling Water Heat Release (Kw) (BTU/min) 240(13660)
Fuel Consumption(g/kw.h)(L/h) 120
Diesel Grade 0# light diesel
Oil consumption (g/kw.h) ≤1
Oil Pressure-Low Idle Speed kPa(PSI) 138
Oil Pressure-Rated Speed kPa(PSI) 345-483
Max. Oil Temperature—℃(℉) 121(250)
Lubricating Oil Grade 15W/40
Lubricating Oil Capacity (L) 50
Cooling Fluid Capacity(L) 30
Fuel Consumption
2
Alternator
Note: The above mentioned datas are standard, and some can be changed
according to client’s requirements.
Supply Scope
3
1. Standard
layout
Auto Control Sylphon
Switch panel Muffle Flange
Cabinet Bellowss
Battery
Storage Instruction Spare
Connecting
battery Manual Parts
Line
2. choice
layout
Fuel System Cycle Water Electrical System Intake System
Domestic Oil Water
Controller Intake Heater
Tank Heater
ATS Auto Switch
Fuel Heater Antifreeze
Panel
Water Oil PMG Permanent
Separator Magnetic Motor
Battery Float
3. peculiar
setup
Soundproof Box Rain Cover Movable Electric Station
Guarantee
The product and service abide by ISO8528 & GB/T2820 standards.
Management systems strictly abide by ISO9001 quality management system and
ISO14001 environmental management system.
All our products must through strict delivery inspection to guarantee the superior
quality.
High efficient assemble and production line to guarantee the delivery just-in-time.
4
1. Brief Introduction
HGM6110KC series power plant auto control panel integrates the technologies of
digitization, intelligentize and network, which is used in automation and monitoring
system of single diesel generator set, achieving the purposes of starting up/ closing
down automatically, data reasoning, alarm protecting and ―three remote‖. The control
panel uses large-screen LCD, Chinese、English and Spanish can be choiced smoothly.
Simplicity of operation, reliable running.
HGM6110KC series power plant auto control panel adopts microprocessor technology,
which achieves the purposes of precision measurement of many parameters、constant
setpoint regulation and timing and threshold setting. All the data of the control panel
can be adjusted through the front panel, or can be adjusted through programmatic
interface using PC, also can be adjusted through RS485 interface using PC. The
control panel can be used widely in all kinds of automatic system for generator sets
because of its compact structure, simple connecting, and high reliability.
2. Performance and characteristics
HGM6110KC is used in single machine automation, which control the generator’s auto
starting up and closing down by remote starting up signal.
The main characteristics as follows:
The dimension of LCD is 128x64, with backlight, three languages (Chinese、English、
Spanish), operation by pressing the button gently.
Equipped with RS485 communication interface, achieve ―three remote‖ by using
MODBUS.
Be fit for the power source of three phase four wire、single phase two wire、two phase
three wire, 50/60HZ.
Collect and display parameters of utility power/ generating electricity three-phase
voltage、three-phase current、frequency and power.
Utility Power
Line voltage Uab,Ubc,Uca
Phase V Ua,Ub,Uc
frequency Hz
5
Generating Electricity
Line V Uab,Ubc,Uca
Phase V Ua,Ub,Uc
Frequency Hz
Load
Current IA,IB,IC
Active power kW
Reactive power kVar
Applied power kVA
Power factor Cos
Accumulated electric energy kWh
Note: The photo and datas are just for reference, if changed, will not prior notice.