Professional Documents
Culture Documents
Paneles Solares Sharp
Paneles Solares Sharp
Your Origin system will be supplied with one of the following sets of panels:
Please note all solar panels supplied are CEC accredited and compliant with
IEC/EN61730 and IEC/EN61215 or IEC/EN61646.
The choice of panels will be at the sole discretion of our installer subject to such
matters as stock availability.
Please see the following specification sheet for further details and panel specifications.
Mono Multi Solutions
TSM-DC01A
TSM-DA01A
The SoluTion
DC/DA01A.08
15.6%
DC/DA01A
MAX effICIenCY
25 YeAr
lIneAr POwer wArrAnTY high performance under low light conditions
Cloudy days, mornings and evenings
Additio
nal va
lue fro
m Trina S
90% o lar’s li
near w
a rranty
80%
Years 5 10 15 20 25
180.5 136
JUNCTION
Power output Tolerance-PMAX (%) 0/+3 0/+3 0/+3
BOX
Maximum Power Voltage-VMP (V) 36.6 37.1 37.6
NAMEPLATE
Maximum Power Current-i MPP (A) 5.19 5.25 5.32
4-Ø 9×12
open Circuit Voltage-VoC (V) 45.1 45.6 46.0
G = 900±10mm
INSTALLING
HOLE
Short Circuit Current-i SC (A) 5.52 5.56 5.60
Module Efficiency ηm (%) 14.9 15.2 15.6
1581mm
Values at Standard Test Conditions STC (Air Mass AM1.5, irradiance 1000W/m², Cell Temperature 25°C).
948mm
6-Ø 4.3 GROUNDING HOLE Maximum Power Voltage-VMP (V) 33.8 34.3 34.8
12-DRAIN HOLE Maximum Power Current-i MPP (A) 4.14 4.18 4.23
A A
open Circuit Voltage (V)-VoC (V) 41.7 42.2 42.5
Short Circuit Current (A)-i SC (A) 4.44 4.47 4.5
628.5mm
noCT: irradiance at 800W/m², Ambient Temperature 20°C, Wind Speed 1m/s.
Back View Power measurement tolerance: ±3%
MeChAnICAl DATA
Solar cells Monocrystalline 125 × 125mm (5 inches)
Cell orientation 72 cells (6 × 12)
Module dimensions 1581 × 809 × 35mm (62.24 × 31.85 × 1.37 inches)
Weight 14.9kg (32.8 lb)
A-A
Glass high transparency solar glass 3.2mm (0.13 inches)
Frame Anodized aluminium alloy
J-Box iP 65 rated
I-V CurVeS Of PV MODule TSM-195 DC/DA01A Cables Photovoltaic Technology cable 4.0mm² (0.006 inches²),
900mm (35.4 inches)
6. 00
1000W/m2 Connector original MC4
5.00
800W/m2
4.00
Current(A)
600W/m2
3.00
TeMPerATure rATIngS MAXIMuM rATIngS
400W/m2
2.00
nominal operating Cell 45°C (±2°C) operational Temperature -40~+85°C
200W/m2 Temperature (noCT)
1.00 Maximum System 1000V DC(ieC)/
Temperature Coefficient of PMAX - 0.40%/°C Voltage 600V DC(ul)
0.00
0.00 10. 00
20. 00
30. 00
40. 00
50. 00
Temperature Coefficient of VoC - 0.30%/°C Max Series Fuse Rating 10A
Voltage(V)
Temperature Coefficient of I SC 0.023%/°C
Average efficiency reduction of 4.5% at 200W/m 2
according to en 60904-1.
wArrAnTY
10 year Product Workmanship Warranty
25 year linear Power Warranty
(Please refer to product warranty for details)
TSM_en_nov_2012
CerTIfICATIOn
PACkAgIng COnfIgurATIOn
Recyclable
packaging
Modules per box: 29 pieces
Modules per 40’ container: 812 pieces
CAuTion: ReAD SAFeTY AnD inSTAllATion inSTRuCTionS BeFoRe uSinG The PRoDuCT.
© 2012 Trina Solar Limited. All rights reserved. Specifications included in this datasheet are subject to change
without notice.
Mono Multi Solutions
TSM-PC05
TSM-PA05
The uniVeRSAl SoluTion
15.0%
MAX effICIenCY
25 YeAr
lIneAr POwer wArrAnTY high performance under low light conditions
Cloudy days, mornings and evenings
Additio
nal va
lue fro
m Trina S
90% o lar’s li
near w
a rranty
80%
Years 5 10 15 20 25
180
JUNCTION
BOX
Maximum Power Voltage-VMP (V) 29.2 29.3 29.7 30.2
150
NAMEPLATE
Maximum Power Current-i MPP (A) 7.90 8.03 8.10 8.13
4-Ø 9×12
open Circuit Voltage-VoC (V) 37.1 37.2 37.3 37.5
G = 1000±10mm
INSTALLING HOLE
Values at Standard Test Conditions STC (Air Mass AM1.5, irradiance 1000W/m², Cell Temperature 25°C).
1650mm
990mm
MeChAnICAl DATA
Solar cells Multicrystalline 156 × 156mm (6 inches)
Cell orientation 60 cells (6 × 10)
Module dimensions 1650 × 992 × 40mm (64.95 × 39.05 × 1.57 inches)
Weight 19.5kg (43.0 lb)
A-A
Glass high transparency solar glass 3.2mm (0.13 inches)
Frame Anodized aluminium alloy
J-Box iP 65 rated
I-V CurVeS Of PV MODule TSM-245 PC/PA05
Cables Photovoltaic Technology cable 4.0mm² (0.006 inches²),
10.00 1000mm (39.4 inches)
9.00 1000W/m2 Connector MC4
8.00
800W/m2
7.00
Current(A)
6. 00
600W/m2
5.00
4. 00
400W/m2 TeMPerATure rATIngS MAXIMuM rATIngS
3.00
2.00
200W/m2 nominal operating Cell 45°C (±2°C) operational Temperature -40~+85°C
1.00
Temperature (noCT)
Maximum System 1000V DC(ieC)/
0.00 Temperature Coefficient of PMAX - 0.43%/°C Voltage 600V DC(ul)
0.00 10.00 20.00 30.00 40.00
Temperature Coefficient of VoC - 0.32%/°C Max Series Fuse Rating 15A
Voltage(V)
Temperature Coefficient of I SC 0.047%/°C
CerTIfICATIOn
TSM_en_Jun_2012
PACkAgIng COnfIgurATIOn
Modules per box: 24 pcs
Modules per 40’ container: 672 pcs
Recyclable
packaging
CAuTion: ReAD SAFeTY AnD inSTAllATion inSTRuCTionS BeFoRe uSinG The PRoDuCT.
© 2012 Trina Solar Limited. All rights reserved. Specifications included in this datasheet are subject to change
without notice.
215WATT
BIG POWER,
SMALL FOOTPRINT
MULTI CRYSTAL SILICON PHOTOVOLTAIC
MODULE WITH 215W MAXIMUM POWER
FEATURES
This multi crystal 215watt module features 14.6%
• High-power module (215W) using 156.5mm
encapsulated cell efficiency and 13.1% module
square multi crystal silicon solar cells with
13.1% module conversion efficiency efficiency. Using breakthrough technology perfected
• Photovoltaic module with bypass diode
in Sharp’s space cell program, the ND-A215A2
minimises the power drop caused by shade module allows for maximum usable power
• Textured cell surface to reduce the reflection
per square metre of solar array.
of sunlight and BSF (Back Surface Field)
A safe, clean, reliable source of energy, Sharp’s
structure to improve cell conversion
efficiency: 14.6% ND-A215A2 photovoltaic module is designed for
• White tempered glass, EVA resin and
large electrical power requirements. Based on the
a weatherproof film, plus aluminum frame technology of crystal silicon solar cells developed
for extended outdoor use over 50 years, this module has superb durability to
• Output terminal: Lead wire with withstand rigorous operating conditions and
waterproof connector is suitable for grid connected systems.
• Certifications: IEC 61215 & IEC 61730
Common applications for the Sharp ND-A215A2
• SHARP modules are manufactured include residences, office buildings, solar power
in ISO 9001 certified factories
stations and solar suburbs. As one of the world’s
leading manufacturer of photovoltaic modules,
Sharp produces an extensive line of high power
modules for every electrical power requirement.
ND-A215A2 – MAXIMUM POWER
IV CURVES DIMENSIONS
1000 [W/m2]
800 [W/m2]
Power (w)
Current (A)
600 [W/m2]
400 [W/m2]
200 [W/m2]
40
B
Characteristic curves: Open circuit voltage /
short circuit current against irradiance
(cell temperature: 25°C)
Short circuit current Isc (A)
Open circuit voltage Voc (V)
Voc
Isc
C
A B C
Irradiance (W/m 2) 994 mm 1652 mm 46 mm
Specifications are subject to change without notice Specifications are subject to change without notice
In the absence of confirmation by device specifications sheets, Sharp takes no responsibility for any defects that may occur in
equipment using any Sharp devices shown in catalogues, data books, etc. Contact Sharp in order to obtain the latest device
specification sheets before using any Sharp device.
• Design and specifications are subject to change without prior notice.
• Colour variations to products may occur due to printing.
• All information and technical details are correct as at product release date.
IV CURVES DIMENSIONS
1000 [W/m2]
800 [W/m2]
Power (w)
Current (A)
600 [W/m2]
400 [W/m2]
200 [W/m2]
40
Voltage (V) Current against voltage
Power against voltage
B
Characteristic curves: Open circuit voltage /
short circuit current against irradiance
(cell temperature: 25°C)
Short circuit current Isc (A)
Open circuit voltage Voc (V)
Voc
Isc
C
A B C
Irradiance (W/m 2) 994 mm 1652 mm 46 mm
Specifications are subject to change without notice Specifications are subject to change without notice
In the absence of confirmation by device specifications sheets, Sharp takes no responsibility for any defects that may occur in
equipment using any Sharp devices shown in catalogues, data books, etc. Contact Sharp in order to obtain the latest device
specification sheets before using any Sharp device.
• Design and specifications are subject to change without prior notice.
• Colour variations to products may occur due to printing.
• All information and technical details are correct as at product release date.