Professional Documents
Culture Documents
Eiu Bite
Eiu Bite
Eiu Bite
** ON A/C 201-250
TASK 73-25-34-710-042-A
Operational Test of the EIU with the CFDS
REFERENCE DESIGNATION
(Ref. 24-41-00-861-002-A). Energize the Aircraft Electrical Circuits from the External Power
(Ref. 24-41-00-861-002-A-01). Energize the Aircraft Electrical Circuits from the APU
(Ref. 24-41-00-861-002-A-02). Energize the Aircraft Electrical Circuits from Engine 1(2)
(Ref. 24-41-00-862-002-A). De-energize the Aircraft Electrical Circuits Supplied from the External
Power
(Ref. 24-41-00-862-002-A-01). De-energize the Aircraft Electrical Circuits Supplied from the APU
(Ref. 24-41-00-862-002-A-02). De-energize the Aircraft Electrical Circuits Supplied from the Engine
1(2)
(Ref. 31-32-00-860-012-A). Procedure to Get Access to the SYSTEM REPORT/TEST/ENG Page
DISCRETE OUTPUTS Menu SHEET 1
< >
< >
< >
< * >
< >
N_MM_732534_5_XCN0_01_00
3. Job Set-up
Subtask 73-25-34-861-054-A
A. Energize the aircraft electrical circuits (Ref. AMM TASK 24-41-00-861-002) .
Subtask 73-25-34-865-060-A
B. Make sure that this(these) circuit breaker(s) is(are) closed:
NOTE: This test is for the system 1. For the system 2, use the indication between parentheses.
(2) On the left or right MCDU get the SYSTEM REPORT/TEST ENG page. (Ref. AMM TASK 31-32-00-
860-012) .
ACTION RESULT
1.Push the line key adjacent to the EIU1 (EIU2) · The EIU1 (EIU2) menu comes into view.
indication.
2.Push the line key adjacent to the GND SCAN- · On the MENU, the NO FAILURE message
NING indication. comes into view.
3.Push the line key adjacent to the RETURN in- · The EIU 1(2) menu comes into view.
dication.
4.Push the line key adjacent to the DISCRETE · The DISCRETE OUTPUTS SIMUL menu comes
OUTPUTS indication. into view.
DISCRETE OUTPUTS Menu SHEET 1
5.Push the line key adjacent to the FAULT indica- · The FAULT STATUS = 1 comes into view.
tion. · On the ENG panel 115VU: the FAULT 1(2) le-
gend comes on.
6.Push the line key adjacent to the FAULT indica- · The FAULT STATUS = 0 comes into view.
tion. · On the ENG panel 115VU: the FAULT 1(2) le-
gend goes off.
ACTION RESULT
7.Push the line key adjacent to the RETURN in- · The CFDS menu comes into view.
dication until the CFDS menu comes into view.
8.Push the MCDU MENU key · The MCDU menu comes into view.
5. Close-up
Subtask 73-25-34-860-064-A
A. On the maintenance panel 50VU:
Push the FADEC GND PWR 1(2) pushbutton switch.
The ON legend goes off.
Subtask 73-25-34-862-054-A
B. De-energize the aircraft electrical circuits (Ref. AMM TASK 24-41-00-862-002) .
End of document