Professional Documents
Culture Documents
Mass Transfer Questions and Answers - Drying-Rate of Batch Drying
Mass Transfer Questions and Answers - Drying-Rate of Batch Drying
Mass Transfer Questions and Answers - Drying-Rate of Batch Drying
Answer: a
Explanation: In batch drying process the heat
is directly allowed over the solids.
Answer: a
Explanation: In cabinet the solids are loaded
and the hot gas is passed over. So itʼs a kind
of direct drying operation.
Answer: a
Explanation: The design of drier is based on
drying curve rate which demonstrates the
time rate.
Answer: b
Explanation: For an effective batch drying
operation to take place, the ratio of wet and
dry surface should be same.
Answer: d
Explanation: The temperature, humidity and
velocity should be constant for constant
drying condition.
a) Time
b) Speed
c) Water vapour
d) None of the mentioned
View Answer
Answer: a
Explanation: The moisture content decreases
with time.
Answer: c
Explanation: Flux = 8/4 * 0.4 = 0.8.
Answer: a
Explanation: After the constant rate period,
the unsaturated drying surface is known as
falling rate period.
Answer: b
Explanation: Flux= Mass transfer co-efficient *
(Ys-Y)
Mass transfer co-efficient= 5/0.5 = 10.
Answer: a
Explanation: If the speed and the direction of
gas never change the rate remains same so
the mass transfer co-efficient remain same.
Answer: a
Explanation: After the constant drying period,
the moisture of unbound will finish then the
dry spots appears. The constant drying period
ends at critical moisture content.
Answer: b
Explanation: After the critical moisture
content, the falling period starts which are the
unsaturated drying region.
Answer: a
Explanation: After the unsaturated drying the
internal movement starts which is the
evaporation of bound moisture.
Answer: a
Explanation: The flux remains constant only
for constant drying period.
a) Bound
b) Unbound
c) Equilibrium
d) None of the mentioned
View Answer
Answer: c
Explanation: At the zero rate, the equilibrium
attains the moisture content at that stage is
equilibrium moisture content.