Professional Documents
Culture Documents
Griptec 2006 (High Resolution)
Griptec 2006 (High Resolution)
Dextra
www.dextragroup.com
The only rebar splice product that pr
AFCAB no M02/004
DIBT no Z-1.5-133
Benefits
Benefits
No reduction of the nominal cross section area One man operation, fully computerized process.
of the bar.
Low operational cost.
Standard parallel thread are used, thus avoiding
torque wrenching. Very quick reconfiguration when changing from
one bar size to another.
Visual-only inspection of joints is sufficient.
Pre-programmed setting of extrusion equipment
No cross threading of parallel threads is and proof-testing parameters for each bar size.
possible. (Contrary to tapered threads)
Fits any reasonable shear cut.
Good fatigue performance thanks to rolled
threads. No dirty lubricant and machining chips.
Note : The information in this catalogue is considered up to date at the time of publication. We reserve the right to make technical and design changes at any time. D
roof-tests during the bar preparation.
A
A two
twosteps
stepsfully
fullyautomatic
automaticprocess
process
Griptec extrusion machines are CE-marked as per the European Directive on the safety of machinery and
are compliant with OSHA regulations.
Dextra shall not accept liability for the accuracy of the information in this publication or for any printing errors
Splicing methods
When the continuation bar can be rotated. When the continuation bar cannot be rotated.
Applications
Contacts
HEADQUARTERS EUROPE
THAILAND (through distributors)
Dextra Manufacturing Co., Ltd.
Tel: (66) 2 726 5731 Fax: (66) 2 328 0374
E-mail: thailand@dextragroup.com
NORTH AMERICA
Dextra America Inc.
Tel: 360 527 0800 Fax: 360 527 0801
E-mail: america@dextragroup.com
Dextra
www.dextragroup.com