Professional Documents
Culture Documents
Visvesvaraya Technological University Belagavi: Project Seminar On
Visvesvaraya Technological University Belagavi: Project Seminar On
Project seminar on
Advanced Vehicle Condition Monitoring System
by
: 4JN15EC410
Vishwanatha
Vignesh R S: : 4JN15EC435
4JN15EC431
Vinay Kumar K : 4JN15EC433
Overview
1 Introduction
2 Aim of the project
3 Objectives
4 Block Diagram
5 Component Details
6 Results and Discussion
7 Conclusion
8 References
(JNNCE ECE Dept) Advanced Vehicle Condition Monitoring System June 13, 2019 2 / 21
Introduction
Introduction
(JNNCE ECE Dept) Advanced Vehicle Condition Monitoring System June 13, 2019 3 / 21
Aim of project
Aim of project
Our main aim is to design an effective information system that can monitor
an automotive vehicle condition.
This project deals with the vehicle condition like Fuel quality and quantity,
and door locking system.
To get information about the location of vehicle, when accident happened.
To detect temperature.
( JNNCEECE Dept) Advanced Vehicle Condition Monitoring System June 14, 2018 4 / 21
Objectives of project
Objectives of project
This project uses IR sensor and accelerometer sensor which can detects the
accident of vehicle.
Using GPS location of accident is detected and notification message is sent
through GSM to registered mobile number.
Ultrasonic sensor is used as fuel level sensor to monitor fuel level.
Pressure sensor is used to check condition.
(JNNCE ECE Dept) Advanced Vehicle Condition Monitoring System June 13, 2019 5 / 21
Objectives of project
continued..
(JNNCE ECE Dept) Advanced Vehicle Condition Monitoring June 13, 2019 6 / 21
Objectives of project
continued..
(JNNCE ECE Dept) Advanced Vehicle Condition Monitoring June 13, 2019 7 / 21
Block Diagram
Block diagram
(JNNCE ECE Dept) Advanced Vehicle Condition Monitoring June 13, 2019 8 / 21
Component Details
Arduino MEGA
(JNNCE ECE Dept) Advanced Vehicle Condition Monitoring June 13, 2019 9 / 21
Hardware Component
Touch Sensor
(JNNCE ECE Dept) Advanced Vehicle Condition Monitoring June 13, 2019 10 / 21
Hardware Component
PH Sensor
Figure 4: pH Sensor
(JNNCE ECE Dept) Advanced Vehicle Condition Monitoring June 13, 2019 11 / 21
Hardware Component
Ultrasonioc Sensor
(JNNCE ECE Dept) Advanced Vehicle Condition Monitoring June 13, 2019 12 / 21
Hardware Component
Buzzer
Figure 6: pH Sensor
(JNNCE ECE Dept) Advanced Vehicle Condition Monitoring June 13, 2019 13 / 21
Hardware Component
Temperature Sensor
(JNNCE ECE Dept) Advanced Vehicle Condition Monitoring June 13, 2019 14 / 21
Hardware Component
Bluetooth module
(JNNCE ECE Dept) Advanced Vehicle Condition Monitoring June 13, 2019 15 / 21
Hardware Component
GSM/GPS module
(JNNCE ECE Dept) Advanced Vehicle Condition Monitoring June 13, 2019 16 / 21
Hardware Component
Accelerometer ADXL345
(JNNCE ECE Dept) Advanced Vehicle Condition Monitoring June 13, 2019 17 / 21
Hardware Component
LCD Display
(JNNCE ECE Dept) Advanced Vehicle Condition Monitoring June 13, 2019 19 / 21
Conclusion
After successfully testing all the modules, the final outcome of this project is that
it can be successfully implemented in the vehicle. With the help of sensors, all
parameters can be simultaneously monitored.
(JNNCE ECE Dept) Advanced Vehicle Condition Monitoring June 13, 2019 20 / 21
References
References
http://www.arduino.cc.
http://www.gsmworld.com.
http://www.wikipedia.com.
G. T. S. Lee and J. Kwon, Design and implementation of vehicle tracking
system usingGPS/GSM/GPRS technology application. 2014 IEEE World
Forum on Internet of Things (WF-IoT), 2014.
N. M. Salas K Jose., X. Anitha Mary., Arm 7 Based Accident Alert and
Vehicle Tracking System. International Journal of Innovative Technology
and Exploring Engineering (IJITEE)., 1988.
(JNNCE ECE Dept) Advanced Vehicle Condition Monitoring June 13, 2019 21 / 21
Thank You...