Professional Documents
Culture Documents
Ip 10 Cli Command Line PDF
Ip 10 Cli Command Line PDF
Ip 10 Cli Command Line PDF
Aug 2008
PROPRIETARY
Contents
1. Document Purpose
The purpose of this document is to describe the basic configuration steps of IP-10
through the CLI interface radio link.
2. Document Scope
This document describes the recommended initial steps in order to connect and
manage IP-10 radio link through the CLI Interface. It includes the configuration steps
of the following main sections:
• Connecting to IDU using default factory setup
• Launching the hyper terminal
• SW Upgrade
• License key activation
• Basic parameters configuration
Getting Started
To log in to the CLI:
1. Power on your PC.
2. Make sure that your PC is connected to the management port on the front panel of
the IP-10 unit.
3. For a first-time login, use the following:
User: admin
Password: admin
Note: When using the Hyper Terminal, you should set the terminal speed (in your PC
terminal
Configuration) to 115200 kpbs. In addition, it is recommended to select the VT-100
terminal type and set the
Terminal size to 24 rows, 80 columns.
IP-10:/>
Name -Info
--------------------------------------------------------------------------------
ls list entities
get get parameter
set set parameter
help help
cd change directory
exit exit CLI
logout logout from CLI
cli-ver cli version
cls clear screen
shell enter secondary shell
write Write the current switch configuration into configuration file
show-tree Show entity tree
find Search for a string in the parameter's entity name and information
fields
lsp list entity parameters and commands
MAIN MANU
IP-10:/> ls
management - Management
platform - Platform
radio - Radio
interfaces - Interfaces
diagnostics - Diagnostics
xml-interface - XML Interface
7.Check HW Address
36. Mute TX
IP-10:/> get radio/rfu/mute-tx↵
disable
IP-10:/> set radio/rfu/mute-tx
disable enable
IP-10:/> set radio/rfu/mute-tx enable↵
37. Check TX/RX LEVEL
IP-10:/> get radio/rfu/tx-level-status↵
22
IP-10:/> get radio/rfu/rx-level↵
-39
39.RFU RF LooPBack
IP-10:/> get radio/rfu/rfu-rf-loopback↵
off
IP-10:/> set radio/rfu/rfu-rf-loopback
off on
IP-10:/> set radio/rfu/rfu-rf-loopback on↵
40.RFU IF LoopBack