Professional Documents
Culture Documents
PC2000 11
PC2000 11
Hydraulic Excavator
2
PC2000-11
• Swing priority valve makes sure swing speed is available when needed UPGRADE
*All comparisons are to prior model in power mode, unless otherwise stated.
3
SPECIFICATIONS
4
PC2000-11
Dimens ions
17030 mm 55'10" 7685 mm 25'3"
5880 mm 19'3" 310 mm
R=5980 mm 19'7" 1'0"
7135 mm 23'5"
7625 mm 25'0"
7030 mm 23'1"
6825 mm 22'5"
5855 mm 19'3"
4635 mm 15'2"
23 mm 2095 mm
6'10"
825 mm
5780 mm 19'0" 810 mm 2'8"
0'1"
2'8"
7445 mm 24'5" 4600 mm 15'1"
5410 mm 17'9"
* Width with triple grouser 1010 mm (40") shoes *5613 mm 18'5"
5650 mm 18'6"
6240 mm 20'6"
working range
586 kN
D 2
Arm crowd force at power max. 3
59700 kg / 65.9 U.S ton
4
Bucket Weight 26,750 lbs 12134 kg 28,800 lbs 13063 kg 27,500 lbs 12474 kg 24,000 lbs 10886 kg
Material Density (loose) 2,750 lbs/yd3 1.63 tonnes/m3 3,000 lbs/yd3 1.78 tonnes/m3 3,250 lbs/yd3 1.93 tonnes/m3 4,350 lbs/yd3 2.58 tonnes/m3
Bucket Width 107 in 2720 mm 102 in 2600 mm 102 in 2600 mm 102 in 2600 mm
Outer, without side shrouds
Note: The above chart is a guideline for bucket selection and may not represent all applications. Bucket sizes, weights, and widths will vary depending on material, fragmentation, or other digging conditions.
5
STANDARD EQUIPMENT
ENGINE AND RELATED ITEMS: HYDRAULIC SYSTEM: OTHER:
• Air cleaner, double element dry • 4 variable displacement piston pumps • Automatic swing holding brake
• Automatic engine warm-up system (2 tandem pumps) for work equipment, • Beacon, 2 (Cab top, engine hood)
• Electric priming pump for fuel travel and swing, 2 variable displace- • Dual rearview mirrors
• Engine, Komatsu SAA12V140E-7 ment piston pumps (1 tandem pump) • Emergency engine stop switch and fuel
turbocharged, U.S. EPA Tier 4 Final for fan drive cut-off lever
certified. • Control levers for work equipment and • Fuel tank, 3400 L 898.2 U.S. Gal
• Fuel pre-filters with water separators swing with PPC system • Fully-automatic greasing system with
• Two cooling fans with fan guard • Control levers and pedals for travel 200 L 52.8 U.S. Gal
(Hydraulic drive, for radiator and oil with PPC system • Fully hydraulic operated stairway and
cooler), reversible • Drain-filters for pumps & motors full 45° access to cab
• Electric open-center load sensing • General tool kit
ELECTRICAL SYSTEM: system • Jump start receptacle
• Alternators, 24 V/2 x 90 A • Four control valves (two integrated • KOMTRAX Plus (vehicle health moni-
• Auto decelerator and auto idling valves) for work equipment, swing and toring system)
system travel • Light in machine cab
• Auto idle shutdown (adjustable) • Heavy lift mode • Maintenance light
• Batteries, 4 x 12 V/140 Ah • High-pressure in-line oil filters • Manual grease gun for track adjuster
• Battery isolator and starting motor • Oil cooler • PM tune-up service connection
isolator • One axial piston motor per track for • Rear reflectors
• Circuit breakers travel with counterbalance valve • Satellite communication system for
• Electrical engine oil pan heater and • Optimized electrical valve control for KOMTRAX Plus (Iridium)
coolant heater smooth and efficient compound • Service center system, full quick
• Horn interconnected with warning light movement charge system (grease, oils, fuel,
• Ladder operating alarm • Shockless boom control coolant)
• Lever lock auto-lock • Two axial piston motors for swing with • Slip-resistant plates
• Lighting switches instrument panel single stage relief valve • Step light with timer
• Radio w/ auxiliary input (3.5 mm jack) • Two-mode pressure setting for boom • Travel alarm
• Rear working light • Wide catwalk and large handrail
• Secondary engine stop switch (ground OPERATOR'S CAB:
access) • Automatic air conditioners (Twin) UNDERCARRIAGE:
• Starting motors, 2 x 11 kW • Built-in top guard conforming to OPG • 810 mm 32" double grouser shoes
• Working lights, 4 boom, 4 cab base, 3 level 2 (ISO10262) • 8 track rollers/3 carrier rollers (Each
fuel tank top front, 1 left front and 1 left • KomVision, all round monitoring side)
under cab side catwalk, LED lamp system • Hydraulic Idler Cushion (HIC) with
system (2 lamps) • Large damper mounted and pressur- shock absorbing accumulator
ized mining shovel cab with large wind- • Track guiding guard (Separate type)
GUARDS AND COVERS: shield, lockable door, large twin wipers
• Dust resistant net for radiator and oil and washers, floor mats, cigarette
cooler lighter, ashtray, 12V power supply x 2,
• Pump/engine room partition cover and cup holders
• Power module under cover • Large high resolution LCD color
• Travel motor guard monitor
• Lock lever
DRIVE SYSTEM: • Rearview monitoring system
• Planetary travel gear with axial piston • Seat belt indicator
motor • Seat belt, 78 mm 3"
• Travel parking brake • Seat, heated, high back, fully adjust-
able air suspension with retractable
seat belt
• Sun shield
• Trainer's seat
OPTIONAL EQUIPMENT
• 1010 mm 40" triple grouser shoes • 8700 mm 28'7" backhoe boom assembly • Full length track guiding guards
• 3900 mm 12'10" backhoe arm assembly • Coolant heater, fuel combustion type • Heavy-duty rock bucket
AESS933-00 ©2019 Komatsu America Corp. AD01(Electronic View Only) 01/19 (EV-2