Professional Documents
Culture Documents
Dart
Dart
E SYRINGES
followed. It is strongly suggested that the filling process be first
E NEEDLES practised with water and repeated several times until you
become familiar with it.
ENANCE
LE INSTRUCTION
DESCRIPTIONS CATALOGUE INSTRUCTIONS VIDEOS
Remove the hypodermic DEALERS
needle from COMPANY
the protective INFO
case. Slide CONTACT
the green/red silicone sleeve onto the needle so that the
NG - AIR PRESSURE injection holes are located at the centre of the sleeve. This can
Home > INSTRUCTIONS > Loading of dart syringes
be achieved by rotating the needle whilst exerting pressure on
ED NEEDLE SIZES the sleeve.
DART SYRINGES Dan-Inject Instruction, Loading of dart syringe.
The green/red silicone sleeve must only be used once.
OF DART SYRINGES Loading of injection rifle and pistol dart syringe.
In the interests of safety these instructions must be strictly
E SYRINGES
followed. It is strongly suggested that the filling process be first
E NEEDLES practised with water and repeated several times until you
become familiar with it.
ENANCE
LE INSTRUCTION
Remove the hypodermic needle from the protective case. Slide
the green/red silicone sleeve onto the needle so that the
injection holes are located at the centre of the sleeve. This can
Remove
be the by
achieved redrotating
stabiliser from
the the whilst
needle dart if exerting
necessary using aon
pressure
DAN-INJECT
the sleeve. venting pin, release any retained air from the dart
syringe air chamber.
The green/red silicone sleeve must only be used once.
Hold the dart with the air chamber uppermost. Using an air filler
syringe fitted with a DAN-INJECT coupling adapter connected to
the drug chamber, position the black plunger at the rear of the
chamber.
Hold the dart with the air chamber uppermost. Using an air filler
art syringes syringe fitted with a DAN-INJECT coupling adapter connected to
21/08/13 07.38
the drug chamber, position the black plunger at the rear of the
Reverse the dart so that the drug chamber is now uppermost.
chamber.
Using a suitable syringe filled with the required
tranquillising/medicating liquid slowly inject the drug into the
nject.com.web14.redhost.dk/Loading-of-dart-syringes/loading-of-dart-syringes.html
chamber. Ensure that you use a sufficiently small gauge needle Side 1 af 3
to allow air from the drug chamber to be expelled without
displacing the drug.
Mount the hypodermic needle onto the dart syringe boss using
nject.com.web14.redhost.dk/Loading-of-dart-syringes/loading-of-dart-syringes.html Side 1 af 3
pliers and locate it firmly by rotating it slightly whilst applying
pressure.
the dart.
pressure.
Mount the hypodermic needle onto the dart syringe boss using
pliers and locate it firmly by rotating it slightly whilst applying
pressure.
nject.com.web14.redhost.dk/Loading-of-dart-syringes/loading-of-dart-syringes.html
Place the red stabiliser firmly on the rear of the dart. Side 2 af 3
If the the
Place stabiliser becomes
red stabiliser soiled,
firmly on itthe
can be of
rear washed at 30.°C. The
the dart.
stabiliser
If must not
the stabiliser be wetsoiled,
becomes beforeitusecanas
bethe syringe
washed may beThe
at 30.°C.
unstable in flight.
stabiliser must not be wet before use as the syringe may be
unstable in flight.