This document discusses material requirements for brazing boiler parts. It specifies that [1] materials used must conform to specifications and be limited to those with assigned stress values, [2] the materials being brazed must be of proven brazing quality and use suitable brazing filler metals, and [3] fluxes or atmospheres must be used to prevent oxidation and brazing procedures must be qualified to prove the suitability of materials.
This document discusses material requirements for brazing boiler parts. It specifies that [1] materials used must conform to specifications and be limited to those with assigned stress values, [2] the materials being brazed must be of proven brazing quality and use suitable brazing filler metals, and [3] fluxes or atmospheres must be used to prevent oxidation and brazing procedures must be qualified to prove the suitability of materials.
This document discusses material requirements for brazing boiler parts. It specifies that [1] materials used must conform to specifications and be limited to those with assigned stress values, [2] the materials being brazed must be of proven brazing quality and use suitable brazing filler metals, and [3] fluxes or atmospheres must be used to prevent oxidation and brazing procedures must be qualified to prove the suitability of materials.
Materials used in the construction of boilers and parts The selection of the brazing filler metal for a specific thereof by brazing shall conform to the specifications in application shall depend upon its suitability for the Section II, and shall be limited to those materials for base metals being joined. Satisfactory qualification of which allowable stress values have been assigned in the brazing procedure under Section IX is considered Table HF-300.1 and Table HF-300.2. The materials proof of the suitability of the filler metal. Brazing used being brazed shall be of proved brazing quality with with brazing filler metals other than those listed in the brazing filler metal employed. Satisfactory qual- Section II, Part C, SFA-5.8 shall be separately qualified ification of the brazing procedure under Section IX is for both procedure and performance qualification in considered proof of acceptable material for brazed accordance with Section IX. construction.
HB-1103 FLUXES AND ATMOSPHERES
Suitable fluxes or atmospheres or combinations of HB-1101 COMBINATIONS OF DISSIMILAR fluxes and atmospheres shall be used to prevent oxida- MATERIALS tion of the brazing filler metal and the surfaces to be Combinations of dissimilar metals may be joined by joined. Satisfactory qualification of the brazing proce- brazing provided they meet the qualification require- dure under Section IX is considered proof of the ments of Section IX. suitability of the flux and /or atmosphere.