Professional Documents
Culture Documents
Graduate Test Answer Key-46
Graduate Test Answer Key-46
At a given instant ship A is travelling at 6 km/h due east and ship B is travelling at 8 km/h due north. The velocity of B 0/1
relative to A is
7 km/h
10 km/h
14 km/h
12 km/h
Correct answer
10 km/h
The c.g. of the shaded area of the below figure whose curve OM is a parabola from point N, is0/1
Correct answer
Option 1
m3
m4
Unitless
Correct answer
m4
converted by Web2PDFConvert.com
If the gravitational acceleration at any place is doubled, the weight of a body, will0/1
Be reduced to half
Be doubled
Not be affected
None of these.
Correct answer
Be doubled
Magnitude
Position
Correct answer
The beam shown in below figure is supported by a hinge at A and a roller at B. The reaction RA of the hinged support A of 0/1
the beam, is
25 kN
27.5 kN
62 kN
23 kN
Correct answer
23 kN
The form work from the underside of slabs, can be removed only after0/1
1 day
4 days
7 days
14 days
Correct answer
14 days
converted by Web2PDFConvert.com
After casting, an ordinary cement concrete on drying0/1
Expands
Mix
Shrinks
Correct answer
Shrinks
Di-calcium silicate
Correct answer
Graded aggregates
Coarse aggregates
Correct answer
Graded aggregates
Bleeding
Honey combing
Correct answer
Segregation
converted by Web2PDFConvert.com
Plywood is made from0/1
Common timber
Bamboo fibre
Asbestos sheets
Correct answer
Common timber
10%
15%
20%
Correct answer
5%
Stability
Workability
Correct answer
Stability
Construction Estimation
converted by Web2PDFConvert.com
Using the given plan and having internal height of 3.2 m and thickness of slab is 15 cm, what will be the internal plaster of 0/1
room?
64.00 m2
32.00 m2
24.00 m2
10.00 m2
Correct answer
64.00 m2
72.36 m2
21.60 m2
28.18 m2
Correct answer
72.36 m2
How many numbers of tiles will be required if the dimension of tile is 600 mm x 500 mm?0/1
113
96
80
256
Correct answer
80
converted by Web2PDFConvert.com
Using the sketch given for a circular column having height 3.5 m. The R.C.C. column proportions are 1:1:2 and has a 0/1
radius of 25 cm. What is the concrete required?
2.75 m2
2.75 m3
69.12 m3
0.69 m3
Correct answer
0.69 m3
2.75 m2
0.2 m2
0.88 m2
Correct answer
5.5 m2
51.87 kg
33.18 kg
52.5 kg
Correct answer
33.18 kg
Construction/Project Management
converted by Web2PDFConvert.com
What is the duration of a milestone?0/1
The duration of the shortest activity on the critical path
Correct answer
Correct answer
What can be said to be true about risk and cost of making changes in the Project Lifecycle?0/1
Risk is highest at the end and Cost is lowest in the middle
Correct answer
Which option lists Project Time Management Processes in their correct sequence?0/1
Define Scope, Define Activities, Sequence Activities, Develop Schedule, Verify Scope
Define Activities, Estimate Activity Durations, Estimate Activity Resources, Develop Schedule, Control Schedule
Define Activities, Sequence Activities, Estimate Activity Resources, Estimate Activity Durations Develop Schedule, Control Schedule
Correct answer
Define Activities, Sequence Activities, Estimate Activity Resources, Estimate Activity Durations Develop Schedule, Control Schedule
converted by Web2PDFConvert.com
Which of the following statements are true regarding project risk management?0/1
Risk monitoring and control involves tracking identified risks and executing risk response
Qualitative risk analysis involves numerically analysing the impacts of identified risks
Risk management planning involves determining which risks might affect the project
Risk identification involves how to plan and execute risk management activities
Correct answer
Risk monitoring and control involves tracking identified risks and executing risk response
The gauge pressure of fluid in a pipe is 55 kPa and the atmospheric pressure is 101 kPa. The absolute pressure of the 0/1
fluid in the pipe is:
46
156
-46
Correct answer
156
Atmospheric pressure
Correct answer
The pressure of the liquid flowing through the divergent portion of a venturimeter0/1
Remains constant
Increases
Decreases
Correct answer
Increases
converted by Web2PDFConvert.com
For turbulent flow, Reynolds number must be0/1
Greater than 2000
Equal to 3000
Correct answer
The head loss through fluid flowing pipe due to friction is···/1
A major loss
A minor loss
Intermediate Loss
No correct answers
Correct answer
L2T-1
ML- 1T-1
ML-2T-2
Correct answer
LT-2
converted by Web2PDFConvert.com
Discharge Q over a rectangular weir of length L and height H, is given by the equation0/1
Q=2⁄3 Cd √2g LH^(3⁄2)
Q=2⁄3 Cd LH√2gh
Q=2⁄3 Cd H√(2gL^2 h)
Correct answers
Structural Analysis
B.M. is maximum
B.M. is minimum
S.F. is zero.
Correct answer
The bending Moment for a pin supported single frame with a UDL on the horizontal member shape is:0/1
Option 1 Option 2 Option 3 Option 4
Correct answer
Option 3
converted by Web2PDFConvert.com
The force in BF of the truss shown in given figure, is0/1
12 kN (T)
12 kN (C)
7.5 kN (T)
7.5 kN (C)
Correct answer
7.5 kN (C)
The deflection due to couple M at the free end of a cantilever length L is0/1
Option 1 Option 2 Option 3 Option 4
Correct answer
Option 3
The shape of the bending moment diagram over the length of a beam, having no external load, is always0/1
Straight line
Parabolic
cubical
Inclined Line
Correct answer
Straight line
A beam of length L is pinned at both ends and is subjected to a concentrated bending couple of moment M at its centre. 0/1
The maximum bending moment in the beam is
M
M/2
M/3
ML/2
Correct answer
M/2
converted by Web2PDFConvert.com
The bending moment envelope for the shown beam is: (Left End Support is Pinned and Right End Support is Fixed)0/1
Correct answer
Option 3
The shear force envelope for the shown simply supported beam is0/1
Correct answer
Option 1
converted by Web2PDFConvert.com
Specify the structural system shown in the figure as choice (b)
Solid Slab
Flat Slab
Correct answer
Correct answers
Option 3
Option 4
converted by Web2PDFConvert.com
Specify the type of slab shown in the figure0/1
Waffle Slab
Solid Slab
Ribbed Slab
Correct answer
Ribbed Slab
Stirrups (Links)
Correct answer
converted by Web2PDFConvert.com
The shaded area shown in figure represents0/1
Correct answer
Pressure
Sunction
Correct answer
Sunction
converted by Web2PDFConvert.com
The mode of failure that should be designed for is0/1
Under-reinforced Section
Over-reinforced Section
Balanced Section
Correct answer
Under-reinforced Section
If the moment of inertia of a section about its axis is I and its effective sectional area is A, its radius of gyration r about 0/1
the axis, is
Option 1 Option 2 Option 3 Option 4
Correct answer
Option 2
Correct answer
converted by Web2PDFConvert.com
The axial tensile force Pe, which equalize to the combined stress due to axial tension P and bending M, at the extreme 0/1
fibre of the section, is given by (where Z is the section modulus of the section).
Option 1 Option 2 Option 3 Option 4
Correct answer
Option 1
A back to back double angle section connected to a gusset plate has a sectional area of:0/1
Same cross sectional area of a section
Correct answer
8200 kg/m3
2400 kg/m3
7400 kg/m3
Correct answer
7850 kg/m3
90° 15’
45° 45’
d. None of these
Correct answer
90° 15’
converted by Web2PDFConvert.com
Which of the following is a unit of area?0/1
Liter
Mile
Acre
None of these
Correct answer
Acre
S 0° E
S 0° W
N 180° E
None of these
Correct answer
None of these
converted by Web2PDFConvert.com
What type of map is shown in Figure0/1
Political map
Thematic map
Physical map
None of these
Correct answer
Political map
In Oman Highway Design Standard, which design group has the highest mobility function?0/1
E
None of these
Correct answer
converted by Web2PDFConvert.com
What type of junction is shown in Figure?0/1
Roundabout
At-grade intersection
Interchange
None of these
Correct answer
Interchange
Pipeline
Maritime
None of these
Correct answer
Maritime
The minimum distance provided to enable the driver to stop and/or avoid an unlikely event is referred to as:0/1
Stopping sight distance
None of these
Correct answer
Soil Mechanics
converted by Web2PDFConvert.com
The relation with which effective stress (σ'), pore water pressure (u) and total stress (σ) has is0/1
σ'=σ-u
σ'=σ*u
σ'=σ/u
Correct answer
σ'=σ-u
Rounded
Flaky
Tubular
Correct answer
Flaky
The approximate depth at which the effective vertical pressure is equal to in a typical deposit of submerged is0/1
5m.
10m.
20m.
100m
Correct answer
10m.
The swelling or expansive nature of clay rich ‘ black cotton soil’ is primarily due to presence of0/1
Kaolonite.
IIlite.
Montmorillonite.
Vermiculite
Correct answer
Montmorillonite.
converted by Web2PDFConvert.com
A footing is founded on loose sand. The probable type of failure it may undergo would be0/1
General shear failure
Punching
Correct answer
On one of the construction sites, it was observed the founding soil is full of compressible soil lenses. The obvious choice 0/1
of engineer for light loading would be
Isolated footing
Combined footing
Raft footing
Pile
Correct answer
Raft footing
0.80
1.00
0.25
Correct answer
0.25
In a compaction test for a soil sample for the construction of an embankment, as the compactive effort increased, the 0/1
optimum moisture content
Increases.
Decreases.
Remains same
Correct answer
Decreases.
converted by Web2PDFConvert.com
Which is the major gas present in the atmosphere?0/1
Nitrogen
Hydrogen
Oxygen
Carbon dioxide
Correct answer
Nitrogen
Above 80
Above 100
Above 120
No correct answers
Industrial processes
Correct answer
Motor vehicle
Nitrogen
Ozone
CFC
Correct answer
CFC
The excess presence of which of the following cause the teeth of children mottled and discoloured?0/1
Chlorides
Hardness
Fluorides
Correct answer
Fluorides
converted by Web2PDFConvert.com
Ultra-violet rays are used for the treatment of water known as0/1
Dechlorination
Disinfection
Aeration
Filtration
Correct answer
Disinfection
Correct answer
Correct answer
This content is neither created nor endorsed by Google. - Terms of Service - Additional Terms
converted by Web2PDFConvert.com