Test Certificate No.

B03940807000335712
Date. 30.03.2019
DEEPAK FASTENERS LIMITED
INDIA
QUALITY CONTROL TEST CERTIFICATE
CERTIFICATE OF CONFORMANCE
DIN EN 10204-3.1

Customer: SAI HARDWARE STORE P.O.No. 18122018 Batch: B0394080

Invoice No. 7000335712 Material: 170097 Grade 10.9

UNBRAKO-10.9
HEX HEAD BOLT M12X1.75X40 GR10.9 F/T 1000
Material Descr: Quantity
BLK
Finish: BLK

The above product conforms to DFL specifications which are similar to the following standards.

Dimensional: ISO-4017 Mechanical & Chemical: ISO-898-1

CHEMICAL ANALYSIS %

ELEMENT CODE C S P Mn Si Cr Mo Ni Al B
Specified Min 0.2 - - - - - - - - -

Max 0.55 0.025 0.025 - - - - - - 0.003

Observation 0.316 0.008 0.018 1.069 0.115 0.411 - - - 0.002

ELEMENT CODE Cu
Specified Min -

Max -
Observation -

MECHANICAL PROPERTIES
ULTIMATE
ULTIMATE
TENSILE PROOF
HARDNESS TENSILE
STRENGT WEDGE TENSILE LOAD () TORQUE
(HRC) STRENGTH-
H- ()
MIN.(Mpa)
MIC MIN.(Mpa)
Min 1040Mpa 32 - - -

Specified Max - 39 - - -

Observation 1069-1090 36-37 - - -

Other Tests Information Product was manufactured to the following property class: 10.9

*satisfactory at load

The material covered by this certification certifies that the suppliers/services detailed hereon have been inspected and tested in accordance with the conditions
and requirements of the contract, or purchase order and unless otherwise noted below, conform in all respects to
the specification(s),drawing(s),relevant thereto. Test reports are on file subject to examination.

This document certifies that Deepak Fasteners Ltd. India supply Mercury/Asbestos free product and material is processed without being exposd to
Mercury/Asbestos and confirms to ROHS.

It is the responsibility of the purchaser to ensure full traceability for recording and maintaining appropriate records pertaining to disbursement identified by this
certificate.

THIS CERTIFICATE MAY NOT BE RE-PRODUCED WITHOUT PRIOR APPROVAL OF P.Velmuthu

Sign:
DEEPAK FASTENERS LTD.
DFL DIVISION