Professional Documents
Culture Documents
48 Tray Dryer - Wallace - Baddi
48 Tray Dryer - Wallace - Baddi
FOR
TRAY DRYER
S.NO. DESCRIPTION
3. INSTALLATION OF MACHINE
4. TECHNICAL SPECIFICATION.
DESCRIPTION OF MACHINE
RECOMMENDED SPARES.
8. DRAWING.
Caution:
Failure to comply with the instructions in this manual may result in damage to the equipment and
personnel.
ALLIED Page No.: 03.
• 48 trays of size 32” x 16” x 11/4” loaded on a trolley. All air contact parts like internal walls,
recirculation fan, shaft, safety grid, steam radiator, etc. of S.S.304 Construction.
• GMP model with all external, visible and non contact parts like outside wall, drive stand,
drive cover, hinges, handles, bottom supports, control panel enclosure, etc in S.S.304.
Outside wall 2.5 thick S.S.304. Inside wall 1.5 thick S.S.304.
• LRB insulation 75 mm thick. Door gasket food grade silicone rubber. Recirculation blower
driven by 2 HP / 1440 RPM/TEFC/ Crompton motor, to be installed on service floor
interconnected by insulated ducting. Exhaust with adjustable damper. Air preparation unit
with 18 KW heaters and 3-micron filter to be installed on service floor. 300 x 300 Aluminum
explosion flap on the rear wall. Control Panel in S.S. 304 enclosure with digital temperature
indicator cum controller, D.O.L. starter for blower, indicator, isolator etc. Non-sparking door
locks.
• a. S.S. 304 Trolley suitable for 48 trays of size 32”x 16”x1¼” in fully welded joints.,
made from 3mm thick angles and 2mm thick square pipes.
• S.S.316Trays of size 32”x16”x1¼” made from 18swg sheet with rounded edges and corners.
Top end reinforced with bidding
• 200 I.D S.S. 304 ducting with 2mm thick LRB insulation and 16 swg fully welded cladding.
ALLIED Page No.: 04.
1) Unpack the case and crate carefully under the supervision of a responsible person
And remove the contents without trying to force any package.
3) Should any shortage be observed in the first check, the cases, individual package, also the
Packing material should be thoroughly searched for a second time in the presence of a
Components, the matter should be immediately brought to the notice of
M/s. Allied. Unit no.: 17, Param Industrial Estate, Naik Pada, Waliv
Vasai (E), District Thane–401 208, Maharashtra, India.
Telephone nos.: (91–250-2451674 / 75) giving full reference of supply.
4) In case of breakage or damage, the nature and extent of each article, component or
Equipment should be documented in clear and precise terms and report must be sent to
The supplier with in a week of the receipt of the supply.
5) All the parts and components should be thoroughly cleared of packing materials before
Assembly with particular reference to moving parts.
6) All contact parts should be washed thoroughly with warm water and soap before equipment is
Put into production.
ALLIED Page No.: 05.
3. INSTALLATION OF MACHINE
3) Connect 3 phase 415 volts 50 cycles AC Electric supply though a suitable isolator and
the starter.
4) Tighten all nuts and bolts (there is a possibility of their getting loosed during transportation)
Ensure effective earthing to the equipment.
5) Electrical:
7) Stop the machine and remove the Material from the machine.
ALLIED Page No.: 06.
4. TECHNICAL SPECIFICATION
Model. : ALL/TD–48.
2. Check / Tighten
a) Nut & Bolt M
b) Motor Belt M
c) Bolts of motor M
3. Lubrication:
a) Grease the Bearings M
b) Grease Motor bearings M
W – Weekly Maintenance.
M – Monthly Maintenance.
ALLIED Page No.: 08.
6. DESCRIPTION OF MACHINE
Tray Dryer are fabricated in double walled Stainless Steel sheet construction mounted on the rigid
steel frame–work, For Insulation: LRB insulation 75 mm thick. Door gasket food grade silicone
rubber. The unit is also provided air-inlet, air filter, adjustable air-outlet and locking type-insulated
door.
7. RECOMMANDED SPARES
8. DRAWING
18 KW Heater
Air Inlet
Exhaust
er 300
filt
Pre
1070
DOOR
1010
1010
520 600
520
PLAN
3850
1880
1760
1040
. A L L I E D
Unit No. : 17 , Param Industrial Estate, Naik Pada, Waliv
Vasai (E), District Thane – 401 208, Maharahstra, India.
Tel.: 95250 – 2451674 / 75.
To,
M/s. Wallace Pharmaceuticals Pvt. Ltd.
Vill: Bhatian, Tehsil: Nalagarh
Dist: Solan, Himachal Pradesh
Ph: 01795-322122.
Dear Sir,
Sub: Sending you the Tray Drier Manual along with TTC 100 Sensor.
In case of any clarification, Please call or write to us any time, we are always ready to serve
you.
Thanking you
yours faithfully,
For ALLIED
Authorized Signatory