Professional Documents
Culture Documents
Sh940c-Ln Bidnllk Om Eng Mfl67370759
Sh940c-Ln Bidnllk Om Eng Mfl67370759
1
CAUTION That is, a single outlet circuit which powers only
RISK OF ELECTRIC SHOCK that appliance and has no additional outlets or
DO NOT OPEN branch circuits. Check the specification page of this
Getting Started
CAUTION: TO REDUCE THE RISK OF ELECTRIC owner’s manual to be certain. Do not overload wall
SHOCK DO NOT REMOVE COVER (OR BACK) NO outlets. Overloaded wall outlets, loose or damaged
USER-SERVICEABLE PARTS INSIDE REFER SERVICING wall outlets, extension cords, frayed power cords, or
TO QUALIFIED SERVICE PERSONNEL. damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
This lightning flash with arrowhead shock or fire. Periodically examine the cord of your
symbol within an equilateral triangle appliance, and if its appearance indicates damage
is intended to alert the user to the or deterioration, unplug it, discontinue use of the
presence of uninsulated dangerous appliance, and have the cord replaced with an
voltage within the product’s exact replacement part by an authorized service
enclosure that may be of sufficient magnitude to center. Protect the power cord from physical or
constitute a risk of electric shock to persons. mechanical abuse, such as being twisted, kinked,
The exclamation point within an pinched, closed in a door, or walked upon. Pay
equilateral triangle is intended particular attention to plugs, wall outlets, and
to alert the user to the presence the point where the cord exits the appliance. To
of important operating and disconnect power from the mains, pull out the
maintenance (servicing) mains cord plug. When installing the product,
instructions in the literature accompanying the ensure that the plug is easily accessible.
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK This device is equipped with a portable battery or
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN accumulator.
OR MOISTURE. Safety way to remove the battery or the
WARNING: Do not install this equipment in a battery from the equipment: Remove the
confined space such as a book case or similar unit. old battery or battery pack, follow the steps
CAUTION: The apparatus shall not be exposed to in reverse order than the assembly. To prevent
water (dripping or splashing) and no objects filled contamination of the environment and bring on
with liquids, such as vases, shall be placed on the possible threat to human and animal health, the
apparatus. old battery or the battery put it in the appropriate
container at designated collection points. Do
CAUTION: Do not block any ventilation openings. not dispose of batteries or battery together with
Install in accordance with the manufacturer’s other waste. It is recommended that you use
instructions. local, free reimbursement systems batteries and
Slots and openings in the cabinet are provided for accumulators. The battery shall not be exposed to
ventilation and to ensure reliable operation of the excessive heat such as sunshine, fire or the like.
product and to protect it from over heating. The
openings shall be never be blocked by placing NOTICE: For safety making information including
the product on a bed, sofa, rug or other similar product identification and supply ratings, please
surface. This product shall not be placed in a built- refer to the main label on the bottom or rear of the
in installation such as a bookcase or rack unless apparatus.
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
Table of Contents
1
1 Getting Started
2 Safety Information
4 Front Panel
4 Rear Panel
5 Remote Control
2
2 Connecting
6 Antenna connection to your TV and this unit 3
6 Connections to Your TV
6 – Connecting HDMI cable
7 – Connecting Video / Audio cable
7 Connecting the AC Adaptor
4
3 Operating
8 Initial Setup
9 Menu Operations
10 Channel Scan 5
10 Connecting to your Home Network
10 – Wireless network connection
10 – Wireless network setup
11 – How to check the internet connection
4 Troubleshooting
12 Troubleshooting
5 Appendix
13 Specifications
14 Trademarks and Licenses
14 – Open source software notice
14 Important Information Relating to Network Services
15 Maintenance
15 – Handling the unit
Front Panel
1
Getting Started
a b c de f g
Rear Panel
a b c d e f g
Remote Control
• • • • • • a• • • • • • • • • • • • c• • • • • •
1 (Power): Switches the unit Coloured buttons: Selects the 1
ON or OFF. color buttons for interactive
Getting Started
(Mute): Mutes the sound. applications.
CABLE Outlet
RF Cable
,,Note
yy If a connected HDMI device does not accept
the audio output of the unit, the HDMI
device’s audio sound may be distorted or
may not be output.
yy When you use HDMI connection, you can
change the resolution for the HDMI output.
yy Changing the resolution when the
connection has already been established
may result in malfunctions. To solve the
problem, turn off the unit and then turn it
on again.
yy When the HDMI connection with HDCP
is not verified, TV screen is changed to
black screen. In this case, check the HDMI
connection, or disconnect the HDMI cable.
yy If there is noise or lines on the screen, please
check the HDMI cable (length is generally
limited to 4.5 m).
Connecting
1280x720p, 1920x1080i or 1920x1080p video Connect the unit to the power supply with the
input. supplied AC adaptor.
yy Not all HDCP-compatible HDMI or DVI devices
will work with this unit. Rear of this unit
-- The picture will not be displayed properly
with non-HDCP device.
-- TV screen is changed to black screen.
VIDEO IN L - AUDIO IN - R
,,Note
You can reset the unit to all its factory settings.
The initial setup menu appears on the screen
after the Factory Reset.
Step 2. Maximize your screen area Step 5. Help make your device better
Maximize your screen area to just barely cover the Check this box to make this device send TV viewing
edge of your TV screen using W/S/A/D and history, usage information, statistics, and crash
OK. reports to Google automatically.
Step 6. TV Viewing
The Initial Setup is completed and you can view the
TV channels.
Setting
You can change the settings of the unit in the
menu.
yy Picture: You can change the settings for the
picture. (Resolution and Screen Size)
yy Sound: You can select the sound mode and
audio language.
3
yy Display: You can select the menu language and
Live TV duration for Infobar.
Operating
You can watch the Live TV and use the various yy Protection: Allows you to set up specific
function related with TV viewing. channels and ratings through blocking schemes.
Also allows you to activate or disable all of the
Guide lock schemes previously set up. A PIN code is
required to gain access to the [Protection] menu.
Shows the Program Guide contains schedule and
(The default PIN code is “0000”.)
program information for TV broadcasting. You can
find programs easily and conveniently and to view yy General: You can see the general informations
schedule and descriptive program information for of the device (decoder, system, network, disk,
the programs. CAS and signal, etc.) And, you can use [Channel
Scan], [Upgrade], [Factory Reset] and [Remove
On Demand harddisk] function.
yy Favorite: You can set favorite channels.
Library
Library has the function that manages the reminder
program, play the recorded contents (PVR), play the
normal files (image, music, video file) in USB device.
yy Reminder: You can see the reserved program list
to watch in the future.
yy PVR: You can see the Recording Schedule and
Recorded Folder.
yy Other Media: You can play video, audio and
photo files in USB device or on-line content
services.
Search
Displays the search menu and you can use the
search function by entering keywords.
Channel Scan
Finds all channels available through the ‘CABLE IN’
source and stores all the active channels found.
1. Press Home and select [Setting] on the Home
Wireless
menu.
Communication
2. Select [General] on the [Setting] menu.
3. Select [Channel Scan] on the [General] menu.
Access Point or
Wireless Router
3
Operating
1. Press Home and select [Application] on the yy Our company is not responsible for any
Home menu. malfunction of the unit and/or the internet
2. Select [All Apps] on the [Application] menu. connection feature due to communication
errors/malfunctions associated with your
3. Select [Settings] on the [All Apps] menu. broadband internet connection, or other
4. Select [Wi-Fi] and select a desired SSID of connected equipment.
wireless network.
yy Some internet contents may require a higher
If you have security on your access point, you bandwidth connection.
need to input the security code as necessary.
yy Even if the unit is properly connected and
configured, some internet contents may not
operate properly because of internet congestion,
the quality or bandwidth of your internet service,
or problems at the provider of the content.
yy Some internet connection operations may not
be possible due to certain restrictions set by the
Internet service provider (ISP) supplying your
3
broadband Internet connection.
Operating
yy Any fees charged by an ISP including, without
How to check the internet limitation, connection charges are your
responsibility.
connection
yy The use of a “Router” may not be allowed or its
You can check the internet connection. usage may be limited depending on the policies
1. Press Home and select [Setting] on the Home and restrictions of your ISP. For details, contact
menu. your ISP directly.
2. Select [General] on the [Setting] menu. yy The wireless network operate at 2.4 GHz
3. Select [Network Information] on the [General] radio frequencies that are also used by other
menu. Information for internet connection is household devices such as cordless telephone,
displayed. Bluetooth® devices, microwave oven, and can be
affected by interference from them.
yy Turn off all unused network equipment in
your local home network. Some devices may
generate network traffic.
yy For the purpose of the better transmission,
placing the unit from the access point as close as
possible.
yy In some instances, placing the access point or
wireless router at least 0.45 m above the floor
may improve the reception.
Notes on Network Connection
yy Move closer to the access point if possible or re-
yy Many wireless home network connection orient the unit so there is nothing between it
problems during set up can often be fixed by and the access point.
re-setting the access point or wireless router.
After connecting the unit to the home network, yy The reception quality over wireless depends on
quickly power off and/or disconnect the power many factors such as type of the access point,
cable of the home network router. Then power distance between the unit and access point, and
on and/or connect the power cable again. the location of the unit.
yy Depending on the internet service provider (ISP), yy Set your access point or wireless router to
the number of devices that can receive internet Infrastructure mode. Ad-hoc mode is not
service may be limited by the applicable terms supported.
of service. For details, contact your ISP.
12 Troubleshooting
Troubleshooting
Specifications
General
Power Requirements 12 V 0 2 A
yy Manufacturer: Yang Ming Industrial
yy Model: WA-24I12FG
AC Adaptor
yy Input: 100 - 240 V ~, 50/60 Hz, 0.7 A
yy Output: 12 V 0 2 A
Dimensions (W x H x D) Approx. 260 mm x 50 mm x 164 mm without foot
Net Weight (Approx.) 0.83 kg
Operating Temperature 5 °C to 35 °C
Operating Humidity 5 % to 90 %
Signal System Standard PAL color TV system
Bus Power Supply (USB) 5V01A
Integrated IEEE 802.11n (2.4 GHz bands) wireless networking
Wireless LAN (internal antenna)
access, compatible with 802.11b/g Wi-Fi networks.
Connectors
VIDEO OUT 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1
AUDIO OUT 2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
5
HDMI OUT (video/audio) 19 pin (HDMI standard, Type A)
Appendix
USB Port 4 pin (USB 2.0 standard) x 2
Warranty Period
The warranty period of the STB is 24 months from the production. Please refer to production date on the STB.
Maintenance
Appendix