Professional Documents
Culture Documents
Ergopulse 25Ptx Impulse Nutrunners: The Power To Boost Your Productivity
Ergopulse 25Ptx Impulse Nutrunners: The Power To Boost Your Productivity
Ergopulse 25Ptx Impulse Nutrunners: The Power To Boost Your Productivity
Impulse nutrunners
The power to boost your productivity
900 NM OF TORQUE FROM A PULSE TOOLWEIGHING LESS THAN 11 KG
Why pulse tools? What’s unique about the ErgoPulse 25PTX?
The reliability, accuracy and robust construction of ErgoPulse tools, combined with the fact that they are
High power-to-weight A user-friendly tool that
comfortable to operate, make them ideal for continuous heavy production.
ratio! won’t wear you out!
Since there is no metal-to-metal impact in a pulse tool, it provides a softer, more controlled pulse with
considerably less vibration and noise than an impact wrench. Weighing just 10.3 kg, the Ergo Find another pulse tool that is
Pulse25PTX gives you the power as compact as Ergo
you would expect from a much Pulse 25 PTX. The
heavier tool. The secret is the steel- length of the tools
BEING IN THE FOREFRONT OF POWER lined aluminum motor and the tita is only 406 mm.
nium housing. Also noise levels are
TOOL TECHNOLOGY, WE HAVE low and, since the
ACHIEVED YET ANOTHER FIRST! Camshaft design gives ErgoPulse 25PTX is a
900 Nm of torque pulse tool, there is minimum reac Low maintenance
At the top of our PTX range, which heavy duty performance of requirements
tion force to your wrist. The back
our impact wrenches. A typical car engine only develops a
now offers torque outputs from handle (patent pending) can be The ErgoPulse 25PTX is simple to
Our ErgoPulse 25PTX has a torque of 200 Nm! In the ErgoPulse
7- 900 Nm, is the unique ErgoPulse turned through 180° allowing you maintain and service with a short
unique pulse unit in a lightweight 25PTX the high power of the pulse
25PTX. This high-performance to set the tool for internal trigger MTTR, mean time to repair. There
titanium housing. It gives you 900 unit is provided by a camshaft and
shut-off pulse tool combines the finger or thumb trigger and the are no springs to wear out. The
Nm of tightening torque in a tool piston design with improved check
advanced features of Atlas Copco rubber handle is easily exchange pulse unit has an oil filled pulse
weighing only 10.3 kg. Find another valve design. Would you expect any
impulse tools with the durability and able. cylinder with the moving parts
pulse tool that can match that! less from the technology leader?
completely immersed in oil, thus
With its impressively high
ensuring a long service life.
power-to-weight ratio and advanced Fast torque build-up with
ergonomic design, the ErgoPulse high tightening accuracy
25PTX is your ideal working partner
Consistently high
Set the desired torque, press the performance, long
for heavy duty tightening. Don’t
trigger and the PTX technology
take our word for it. Try one! working life-time
ensures fast torque build-up. The
Building heavy trucks and buses, An air lubrication reservoir in the
tool shuts off automatically when The back handle can be turned through
off-road vehicles? Or perhaps you 180° allowing you to set the tool for internal handle ensures efficient lubri
the correct torque is achieved.
work in the energy sector? The trigger finger or thumb trigger. cation of the motor even if the
Accuracy is high, as high as in the
power, speed and accuracy of the airlines are in poor condition.
whole PTX range.
ErgoPulse 25PTX could raise your Thus, you get consistently high
productivity. In fact, this tool is the performance. The tool’s durable,
answer to a prayer for any industry heavy duty housing provides good
where heavy duty tightening is per protection for the TRIM valve and
formed on a daily basis. ensures a long working life-time
for the tool.
TECHNICAL DATA
Air con- Rec. Air
Bolt Square Free CS sumption hose inlet
a
size drive Torque range speed Weight Length distance under load size thread
Model mm in Nm ft lb r/min kg lb mm mm l/s cfm mm in Ordering No.
TRIM-RE
EP25PTX900 GR25-RE M24-M27 1 450-900 330-660 4500 d 10.3 22.7 406 58.5 30 63 13 1/2 8431 0376 90
Accessories included
Eye bolt (0371 1113 00)
Spade handle (4250 0932 91)
Suspension yoke (4250 2760 91)
Optional accessories
Straight rubber handle 4250 2725 80
Spade handle Straight rubber handle
Recommended
coupling F/RD kit Hose kit Whip hose kit MultiFlex swivel Service kit
MIDI F/RD 15 5 m TURBO 16, ø 16 mm (5/8”) 0.7 m TURBO 16, ø 16 mm (5/8”)
+ Ball valve + ErgoNIP 10 + ErgoNIP 10
ErgoQIC 10 + ErgoQIC 10 + ErgoQIC 10 + Nipple 1/2’’ BSP MultiFlex 1/2” BSP
Ordering No. 8202 0829 11 8202 1180 34 8202 1180 28 8202 1350 24 4081 0427 90
www.atlascopco.com