Professional Documents
Culture Documents
Wind On Tower NS Actual As Per en 50341 - R0 - 1 To Check
Wind On Tower NS Actual As Per en 50341 - R0 - 1 To Check
Wind On Tower NS Actual As Per en 50341 - R0 - 1 To Check
PK 1565 5344 2113 7214 2116 7216 1716 6836 529 1804
F1= Longi. Face 51.350 1.318 34.92 746.9 4.800 1.522 0.317 2.474 1.766 3130
F2=Trans. Face 51.350 1.318 34.92 746.9 18.320 4.812 0.263 2.673 1.766 10687
TC 5922 11832 7996 15974 7996 15976 6260 13924 1999 3994
F1= Longi. Face 46.025 1.297 34.37 723.6 13.945 4.279 0.307 2.510 1.780 8715
F2=Trans. Face 46.025 1.297 34.37 723.6 21.737 6.167 0.284 2.593 1.780 12977
MC 9518 13735 12849 18542 12852 18544 9880 15052 3213 4636
F1= Longi. Face 38.300 1.262 33.44 685.0 17.728 5.166 0.291 2.565 1.804 10320
F2=Trans. Face 38.300 1.262 33.44 685.0 26.475 6.967 0.263 2.671 1.804 14492
BC 21216 23279 28642 31427 28644 31428 31696 34328 7161 7857
F1= Longi. Face 24.350 1.176 31.16 594.8 100.751 14.319 0.142 3.196 1.873 32111
F2=Trans. Face 24.350 1.176 31.16 594.8 100.751 14.293 0.142 3.197 1.873 32066
BB 19405 19382 26197 26166 26200 26168 32784 32784 6550 6542
F1= Longi. Face 12.300 1.046 27.72 470.7 32.100 3.336 0.104 3.385 2.000 6698
F2=Trans. Face 12.300 1.046 27.72 470.7 32.100 3.336 0.104 3.385 2.000 6698
GIR TOP 12415 12507 16761 16885 16764 16888 19668 19668 4191 4222
F1= Longi. Face 5.300 1.000 26.50 430.2 97.750 9.572 0.098 3.416 2.046 18133
F2=Trans. Face 5.300 1.000 26.50 430.2 97.750 9.687 0.099 3.410 2.046 18317
CL 9066 9158 12240 12364 12240 12364 13244 13244 3060 3091
Note: 1) As per BS EN 50341-1:2001 Clause 4.2.2.4.3 on page -54-,
2) Qwt1 = qh * Gq * Gt * (1+0.2*sin²2Φ) * (Cxt1*At1*cos²Φ) Qwt2 = qh * Gq * Ƴw * Gt * (1+0.2*sin²2Φ) * (Cxt2*At2*sin²Φ) Qwt = Qwt1 + Qwt2
3) Qwt = qh * Gq * Gt * (1+0.2*sin²2Φ) * [Ct1*At1*cos²Φ + Ct2*At2*sin²Φ]
qh is the dynamic wind pressure
h is the reference height above ground to be taken into account for the lattice tower section being considered;
Gq is the Gust Response Factor as per Clause 4.2.2.3
Gt is the structural Resonance factor = 1.05 for tower heights below 60 m.
Ct1, Ct2 is the drag factor for lattice tower panel related to the solidity ratio of face 1 and face 2 respectively of the section being considered in a wind perpendicular to this panel;
At1, At2 is the effective area of the elements of lattice tower panel face 1 and face 2 respectively of the section being considered;
Φ is the angle between wind direction and the longitudinal axis of the lattice cross-arm.
DESIGN : J020-DES-1
DISTRIBUTION OF WIND LOAD TOWER : NS+6 BE+ 3 LE
FULL (100%) WIND 0° WIND (TRANSVERSE WIND)
Reference Wind speed at 10 m height, VR 10.0 m/s Wind Angle with Longi Face,Φ= 0° Air Density, ρ = 1.225 Terrain Category = II
Reference Wind Pressure; qR=1/2*ρ*VR² 61.3 N/m² 1+[0.2*sin²(2Φ)] = 1.000 Partial Factor, Ƴw = 1.35 Terrain Factor, KT = 0.19
Structural Response Factor, Gt = 1.05 Ground Roughness Factor, Z0 0.05
Part Face Height of Velocity Velocity at Wind Circum- Expose Solidity Drg co- Gust Wind Load - Qwt at Wind Distribustion Wind Load Applied Wind Applied
Between c. g. of Height Height 'h' Pressure at scribed d Area Ratio efficient Response panel centroid inclusive of Wind
part Factor height 'h' Area Factor Partial Factor
(See Note 2)
m KT*ln(h/Z0) Vh=Fvh*VR qh=½*ρ*Vh² Ac At1, At2 χ Cxt1, Cxt2 Gq Qwt1 Qwt2 WTR WLG WTR*Ƴw WLG*Ƴw MF = 1.00 MF = 1
h Fvh m/s N/m² m² m² 3.96(1–1.5χ+χ²) (1+2.28/ln(h/Z ))² Transv. N Longi. N Transv. N Longi. N Transv. N Longi. N Transv. N Longi. N
0 Transv. N Longi. N