This document provides guidance on field inspections for construction projects. It outlines key structural, architectural, plumbing, and electrical items to check, including: excavation depth, concrete thickness, reinforcement spacing, waterproofing, stair dimensions, toilet clearances, surface preparation, plumbing slopes, conduit sizes, and more. In total, over 50 specific structural, architectural, and mechanical inspection points are listed to ensure compliance with standards and approved construction plans.
This document provides guidance on field inspections for construction projects. It outlines key structural, architectural, plumbing, and electrical items to check, including: excavation depth, concrete thickness, reinforcement spacing, waterproofing, stair dimensions, toilet clearances, surface preparation, plumbing slopes, conduit sizes, and more. In total, over 50 specific structural, architectural, and mechanical inspection points are listed to ensure compliance with standards and approved construction plans.
This document provides guidance on field inspections for construction projects. It outlines key structural, architectural, plumbing, and electrical items to check, including: excavation depth, concrete thickness, reinforcement spacing, waterproofing, stair dimensions, toilet clearances, surface preparation, plumbing slopes, conduit sizes, and more. In total, over 50 specific structural, architectural, and mechanical inspection points are listed to ensure compliance with standards and approved construction plans.
This document provides guidance on field inspections for construction projects. It outlines key structural, architectural, plumbing, and electrical items to check, including: excavation depth, concrete thickness, reinforcement spacing, waterproofing, stair dimensions, toilet clearances, surface preparation, plumbing slopes, conduit sizes, and more. In total, over 50 specific structural, architectural, and mechanical inspection points are listed to ensure compliance with standards and approved construction plans.
POINTERS ON FIELD INSPECTION (for guidance purposes):
A. STRUCTURAL (For Checking):
1. Depth of excavation 2. Approved base course or road base 3. Compaction test result 4. Anti-termite application 5. PCC thickness 6. Bituminous paint application 7. Pipes passing thru tie beam (consider inverted elevation of street main pipe) 8. Strength of concrete required 9. Framing Layout 10. Size of structural members and thickness 11. Number of bars spacing and clearance between bars 12. Concrete covering 13. Location of splicing for beams and columns 14. Spacing of stirrups and ties (stirrups & ties be in contact with the main bars) 15. Provision of camber for long cantilever beams and slab 16. Plumbness and leveling of structural members 17. Additional reinforcement on beams with pipe sleeves 18. Profile of tendons and number of wires, if any 19. Anchorage of tendons, if any 20. Dowel requirements 21. Depression of all toilets, patios and balconies 22. Waterproofing system and flashing height from floor finish level along wall 23. Architectural treatment / detail for exterior façade 24. Provision of riglet (waterproofing edge cover) for all deck area
B. ARCHITECTURAL (For Checking):
1. Set back & layout 2. Elevation of all existing structure 3. Stairway head rooms and its width 4. Number of steps (stairway) 5. Width of hallway 6. CHB fillers, etc. (if it’s complied with standard and approved materials) 7. Location of toilets; check clear dimensions, i.e. shower, toilet and lavatories 8. Preparation of surface for all finishes 9. Plumbness and alignment of wall & ceiling finishes 10. Alignment of C.O. and switches 11. Square-ness of all opening 12. Plumbness of column plastering 13. Leveling of roof gutter 14. Workmanship on edging of cabinet and closet doors 15. Plumbness and alignment on tile laying 16. Height of counters
POINTERS ON FIELD INSPECTION by Eng. Rolando L. Paule Page 1
C. PLUMBING / ELECTRICAL (For Checking): 1. Mounting height (shower head, switches, etc.) 2. Location of heater / pumps 3. Location of metering 4. Slope of pipe lines 5. Covering of underground piping 6. Boxes treatment 7. Conduit sizes and bends 8. Approved wires and cables 9. Others
POINTERS ON FIELD INSPECTION by Eng. Rolando L. Paule Page 2