Professional Documents
Culture Documents
L3 - SN - 73050 - Maintenance Mode in LOGIQTM 3
L3 - SN - 73050 - Maintenance Mode in LOGIQTM 3
L3 - SN - 73050 - Maintenance Mode in LOGIQTM 3
PROBLEM:
It is possible to use the Key Sequence "Ctrl+Alt+Del" with the Service Dongle to go to Maintenance
Mode. This is a wrong Process to go to maintenance mode and can cause system data corruption.
SOLUTION:
It is best to use the Service Dongle with the following process to go to the maintenance mode.
1.) In the imaging mode, to go to the Maintenance mode, insert the Service Dongle and then press
“Ctrl+Alt+R” keys
2.) Click on “Yes” as shown in the figure below.
Technical Support
GEMS - Americas GEMS - Europe GEMS - Asia
OLC-Europe OLC - Asia
Online Services Ultrasound
Phone: Toll Free Numbers or Phone: 65-6277-3512
Phone: 1-800-321-7937 (USA/Canada)
(English/German) Fax: 65-6272-3997
1-262-524-5300 (Latin America)
(49) (212) 2802 207 General Imaging
Fax: 1-414-647-4125
(49) (212) 2802 208 Cardiac
Fax: (49) (212) 2802 431