34-10-00-00 Conf 00 - Air Data/Inertial Reference System (Adirs) - Description and Operation

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

5/23/2019 IAC - A318 / A319 / A320 / A321 - AMM - FSN: 255 - 01-May-2019 - 1.

General

CUSTOMIZATION AIRCRAFT TYPES DOCTYPES REVISION DATE TITLE TAIL NUMBER - MSN - FSN
IAC A318 A319 A321 A320 AMM 01-May-2019 1. General VT-EXE - 06803 - 255

34-10-00-00 CONF 00 - AIR DATA/INERTIAL REFERENCE SYSTEM (ADIRS) -


DESCRIPTION AND OPERATION
** ON A/C FSN ALL
1. General
** ON A/C FSN 251-300, 401-450
Ref. Fig. ADIRU - Block Diagram
A three-channel Air Data Inertial Reference System (ADIRS) supplies the primary air data and
heading/attitude data.
This configuration has triple redundant data for all the inertial and air data functions.
Each channel is isolated from the other channels and supplies data independently as given in the
ARINC Characteristic 738.
The ADIRS has:
- Three Air Data/Inertial Reference Units (ADIRU) (ATA 34-12)
- A Mode Selector Unit (MSU) (ATA 34-12)
- Three pitot probes (ATA 34-11)
- Six static probes (ATA 34-11)
- Eight Air Data Modules (ADM) connected to the pitot and static probes (ATA 34-11)
- Two Total Air Temperature (TAT) sensors (ATA 34-11)
- Three Angle of Attack (AOA) sensors (ATA 34-11)
Each of the ADIRUs has two parts:
- The Air Data Reference (ADR) part which supplies air data parameters (ATA 34-13)
- The Inertial Reference (IR) portion which supplies attitude and navigation parameters (ATA 34-
14).
The parameters are transmitted to the user systems through the ARINC 429 buses.
The Built-In Test Equipment (BITE) is included in the ADIRUs and the ADMs.
It senses and identifies a failure related to the ADIRS and sends it to the Centralized Fault Display
System (CFDS) (ATA 34-18).

© AIRBUS S.A.S. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.


1/2
STANDBY INSTRUMENTS
5/23/2019

ATTITUDE AND HEADING


34-22

SENSOR-
ANGLE OF SENSOR-
ATTACK, 1 ADIRU ADIRU ADIRU ANGLE OF
3FP1 1 3 2 ATTACK, 2
3FP2
SENSOR-
ANGLE OF SENSOR-
ATTACK, 3 1FP1 1FP3 1FP2 TAT, 2
3FP3 11FP2
SENSOR-
TAT , 1
11FP1

PROBE- 19FP3
PITOT, 3
9DA3 ADM
19FP8 PROBE-
19FP1 19FP2 PITOT, 2
PROBE- ADM
PITOT, 1 ADM ADM 9DA2
9DA1
19FP5 19FP4
PROBE- PROBE-
L STATIC, 1 ADM ADM R STATIC, 1
7DA1 8DA1
19FP7 19FP6 PROBE-
PROBE-

© AIRBUS S.A.S. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.


L STATIC, 2 ADM ADM R STATIC, 2
7DA2 8DA2

PROBE- PROBE-

** ON A/C FSN 251-300, 401-450


L STATIC, 3 R STATIC, 3
7DA3 8DA3

MSU - ADIRS USER


SYSTEMS
USER
SYSTEMS USER
SYSTEMS

Figure 34-10-00-11200-00-D (SHEET 1) - ADIRU - Block Diagram


IAC - A318 / A319 / A320 / A321 - AMM - FSN: 255 - 01-May-2019 - 1. General

ARINC BUS
TOTAL PRESSURE PIPE
STATIC PRESSURE PIPE

N_MM_341000_0_ADM0_01_00

2/2

You might also like