Professional Documents
Culture Documents
Metrology and Measurement Lab: List of Experiments
Metrology and Measurement Lab: List of Experiments
LIST OF EXPERIMENTS
1. Calibration of Vernier / Micrometer / Dial Gauge
2. Checking Dimensions of part using slip gauges
3. Measurements of Gear Tooth Dimensions
4. Measurement of Angle using sine bar / sine center / tool makers microscope
5. Measurement of straightness and flatness
6. Measurement of thread parameters
7. Setting up of comparators for inspection (Mechanical / Pneumatic /
Electrical)
8. Measurement of Temperature using Thermocouple / Pyrometer
9. Measurement of Displacement
10. Measurement of Force
11. Measurement of Torque
12. Measurement of Vibration / Shock
LIST OF EQUIPMENT
(For a batch of 30 students)
1. Micrometer - 5
2. Vernier Caliper - 5
3. Vernier Height Gauge - 2
4. Vernier depth Gauge - 2
5. Slip Gauge Set - 1
6. Gear Tooth Vernier - 1
7. Sine Bar - 1
8. Sine Center - 1
9. Bevel Protractor - 1
10. Floating Carriage Micrometer - 1
11. Profile Projector / Tool Makers Microscope - 1
12. Mechanical / Electrical / Pneumatic Comparator - 1
13. Autocollimator - 1
14. Temperature Measuring Setup – 1
15. Displacement Measuring Setup - 1
16. Force Measuring Setup - 1
17. Torque Measuring Setup - 1
18. Vibration / Shock Measuring Setup – 1