Professional Documents
Culture Documents
Experiment#4: Performing Practical: Step1
Experiment#4: Performing Practical: Step1
Problem Statement:
Problem Statement Compressors are used to move gases. The compressor increases the pressure of
the gases. A mixture of natural gas (C1, C2, C3, i-C4, n-C4, i-05, n-05, n-C6, C7 + ) at 100°C and 1 bar
is fed into a compressor that has only 30% efficiency. The flowrate of the natural gas is 100 kgmole/h
and its outlet pressure from the compressor is 5 bar. Using Peng-Robinson equation of state as a
fluid package, determine the outlet temperature of the natural gas.
Performing Practical:
Step1:
Select the Package and Component as Given Below.
Component C7 + is not available in the Component Library. Therefore, you need to create
this component using Hypothetical Show below
You have now finished defining the fluid package. Click the Enter Simulation Environment
button when you are ready to start building the simulation.
Step 2:
Installing a Stream:
Press F11. The Stream property view appears
If in the end the green color shows up the the experiment is done Correctly